6-pole motors

Power: 1 ch - 250 ch
Rotational speed: 1,800, 1,200, 3,600 rpm
Operating temperature: 40 °C

... without life adjustment factors on belted loads • All 2 pole motors are vibration tested on a rigid base yielding smooth reliable operation • Patented bearing cooling system for TEFC motors ...

Power: 90 kW - 400 kW
Torque: 289.26 Nm - 1,284.67 Nm
Rotational speed: 1,000, 1,500, 700, 3,000 rpm

The W22 Medium Voltage motors provide the same advantages as the W22 Low Voltage line, but with voltages of 1.1kV to 6.6kV. - Reduced vibration and noise levels - Higher efficiency ...

Power: 0.125 ch - 400 ch
Rotational speed: 900 rpm - 3,600 rpm

... Purpose three phase motors are available in totally enclosed cast iron and industrial steel band for harsh applications. Designed for "general purpose" use means that these motors can be used in many ...

Power: 0.06 kW - 30 kW

... with a selection of AC or DC brakes. To maximize our e-motor flexibility, all of them can be controlled with inverters. Key features Up to IE3 efficiency Compact version Inverter ...

Power: 28,500 W
Operating temperature: -50 °C - 60 °C

... induction motors provide reliability and availability in the toughest and most demanding applications. ABB’s high voltage modular induction motors are available as A-series engineered motors ...

Power: 0.12 kW - 200 kW

Premium efficiency IE3 three-phase induction motors with aluminum frame High-resistance: IP 55 motors with aluminum frame Premium efficiency: IE3 class on direct on-line and inverters, NEMA Premium. Compact: ...

Power: 0.75 kW - 315 kW
Operating temperature: -20 °C - 55 °C

TECO European motor line ATEX motors provides comprehensive protection defined by ATEX and IECEx. Zone 2, 21, 22 are available in the product line. Characteristics IEC Ex / ATEX approved by SGS ...

Power: 0.12, 0.75 kW

... Walther Flender electric motors and gearboxes allow us to create the foundation for a highly efficient and also economical drive train. The Walther Flender electric ...

Power: 0.09 kW - 30 kW

... MEDIUM-LINE,PREMIUM-LINE Motor Type: 1- or 3-phase asynchronous motor Rated Output: 0.09 - 30 kW, 0.09 - 18.5 kW Rated Voltage: 230/240 - 265/480 V, 115 - 575 V Frequency: 50 / 60 Hz, variable ...

Power: 0.09 kW - 75 kW
Torque: 0.55 Nm - 860 Nm

... asynchronous motors as well as improved partial load performance. PM motors also have higher performance levels than asynchronous motors of the same size. For example, the magnet wheel ...

Power: 0.09 kW - 55 kW

Integral motors The EUSAS integral motor is part of the Watt motor system. All features and benefits have been implemented and further developed. The motor is robust, ...

Power: 1.1 kW - 22 kW

Reducing energy consumption and CO2 emissions AC motors have a significant impact on the total energy operation cost for industrial, institutional and commercial buildings. With this in mind Lafert ...

Power: 0.06 kW - 2,000 kW

type of protection:Safe Area power range:0.06kW to 2000kW frame size:56 - 710 number of poles:2,4, 6, 8 and more ingress protection:IP 23, IP 55 and higher thermical class:155 (F), 180 (H) method of cooling:TEFC, ODP

Power: 187 W - 2,250 W

... frame motors are for general purpose applications in MS Rolled powder coated body construction. These are available in NEMA 56 or IEC(Metric) 90 frame, foot and flange mounting arrangements. Thermal protection is optional. ...

Power: 180 W - 1,100 W
Torque: 0.7375 ft.lb - 2.2125 ft.lb
Rotational speed: 1,500 rpm - 6,000 rpm

This new line of brushless DC motors are fitted with six poles in NeFeBo magnets, and as the device is without brushes then there is an increased performance consisting of a reduced need ...

Power: 0.06 kW - 315 kW
Torque: 2.5 Nm - 3,054 Nm
Rotational speed: 925 rpm - 2,990 rpm

Frame size - 56 - 355 Mounting arrangements B3, V5.V6, B5, V1.V3, B35 Voltages 200-690V line and inverter operation Frame construction Aluminium and Cast iron Degree of protection IP55, IP56, IP65, IP66 Température ...

Power: 0 W
Torque: 0.2 Nm - 115 Nm

Brushless motors for low and standard interia. The size available are B28, B36, B56, B63, B71, B100, B132 . They range from O.2 nm to up to 120 nm. Voltage is between 220/480 vac poles no 4,6,8,10 ...

Power: 0.03 kW - 18.5 kW
Torque: 0.5 Nm - 32 Nm
Rotational speed: 860 rpm - 2,860 rpm

... Thermoswitch PTC Second motor shaft Efficiency classes: We offer induction motors acc. to IEC standard in three efficiency classes: IE1 or without specification for intermittent operation or as ...

Power: 0 kW - 11.2 kW
Intensity: 50, 60, 70, 80 A
Torque: 15.2 Nm - 15.8 Nm

... D65L161 BLDC motors are designed for high performance gearless use, and are ideal for underwater thruster applications where rapid acceleration and high speed are called for. Protection Level: IP68 Electric Motor Diameters ...

Power: 2,225, 4,290, 957, 4,470 W
Intensity: 5.35, 1.22, 6.25, 2.58 A
Rotational speed: 525, 975, 450, 675 rpm

... brushless motors features Radial Slotted Technology. This technology is ideal for Wind Turbine applications because it provides very high power in the smallest lightest package possible and because there is no maintenance ...

Power: 0.09 kW - 900 kW

Santerno motors comply with the applicable European High Efficiency standards: High Efficiency IE2 and Premium Efficiency IE3 Maine features – External ventilation – Squirrel-cage rotor – Aluminium and cast iron ...

Power: 5.5 kW
Intensity: 11.8 A
Rotational speed: 973 rpm

... F with class B temperature rise • Mounting: B3 - Available B5, B14, B34, B35, V1 on request • Fan: Bi-directional fan • Drive Suitability: Suitable for DOL and VFD • Thermistors: PTC included as standard for VFD applications • ...

Power: 0.03 kW - 15 kW
Intensity: 0.5 A - 40 A
Torque: 0.4 Nm - 98 Nm

Simotop series aluminum housing three-phase asynchronous motors, with latest design in entirety, are made of selected quality materials and conform to the IEC standard. Simotop motors have good performance, ...

Power: 0.75 kW - 30 kW

... dedicated pumps for use on hydraulic motors, the motor is within the bore axis motor.. INSTALLATION IS DIVIDED INTO Horizontal, vertical; motor pôles ...

Power: 40 kW - 167 kW
Torque: 500 Nm - 915 Nm
Rotational speed: 700 rpm - 2,000 rpm