DN: 0.15 in - 0.25 in
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 160 °F
... “11” Series valves are available with a 5/32 push-in input port and a choice of 1/8 NPT(F), ¼ push-in or 5/32 push-in output ports. The output port also swivels to ease alignment during installation. Actuator options ...
DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: 0 °C - 120 °C
... max. Δp over the valve Versions with and without pressure measurement nipple The valve is closed when the spindle is moved in Closing against the pressure Slight adaptation of the proven SAUTER actuator ...
DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar
... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...
SOMAS
... out of the actuator, thereby “locking” the actuated valve assembly in place. When the control signal returns, the valve will reopen. With the use of accessory solenoid valves ...
Max-Air Technology
DN: 15 mm - 100 mm
Pressure: 40 bar
Temperature: -10 °C - 400 °C
... single seated, three-way globe control valves designed to ensure accurate control in mixing and diverting process engineering and industrial applications. These valves can be assembled with pneumatic, ...
VALSTEAM ADCA Engineering S.A.
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... Here's how a motorized valve works: Electric motor or actuator: The heart of a motorized valve is the electric motor or motorized actuator. This component is connected to the opening ...
Pressure: 0.1 MPa - 1 MPa
Temperature: -5 °C - 60 °C
... control device designed to enable the control of air flow rates, ensuring optimal performance of pneumatic cylinders and actuators. 1. Indicator window allows for numerical verification of flow rate setting, which can significantly reduce ...
DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C
... The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve is equipped ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
... EFFAST PVC-U valve BK1 is a true union ball valve ideal for heavy duty applications, chemical applications and water treatment. Technical features: Solvent welded sockets (ISO, BS, ASTM, JIS), threaded sockets (BSPP ...
DN: 50 mm - 300 mm
Pressure: 40 bar
Temperature: 180 °C
... operating cycles igh-performance valve with extended service life H2-ready OPERATION DETAILS The linear movement of the valve stem is generated by a strong pneumatic actuator which is energized ...
Kühme Armaturen GmbH
DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C
... least 250 μm thickness, color RAL5015 bolts: stainless steel SS304/carbon steel WRAS, ACS approved product •Electric actuator REGADA S02, M03. M04 •Protection code IP67 (SO2), IP55 (MO) •Terminal board connection •2 torque switches, ...
BLUCAST
DN: 50 mm - 300 mm
Pressure: 10 bar
... Replaceable top packing gland enables sealing replacement without disassembly of the valve The valve is self-cleaning when opening the valve, an additional scraper is available for extra protection of ...
DN: 15 mm - 80 mm
Pressure: 25, 16 bar
Temperature: -10 °C - 350 °C
... transfer oil systems. The three-way valves can be actuated by a pneumatic diaphragm actuator of the 2000 series or by the Honeywell MP953. In addition, the electric actuators ...
A.Hock MSR u. Electronic Service GmbH
Pressure: 350 bar
Temperature: -54 °C - 204 °C
Flow rate: 70 l/min
... to the actuator, and the excess flow will return to the oil tank through the check valve via the oil port VB (VA). When the outlet MA (MB) pressure increases, the inlet pressure of the throttle valve ...
DN: 15 mm - 25 mm
Pressure: 20 bar
Temperature: -10 °C - 130 °C
... terminal balancing valve with standard test points (Fig. 9525) and optional electric actuator (Vaurien) Additional information Material - DZR Brass Typology - Static balancing Connection ...
VIR
DN: 15 mm - 125 mm
... Thread ball body-cover Flanges drilled acc.to ANSI Possibility of equipment with handlever, manual gear, pneumatic or electric actuator (on request) Control equipment connection according to ISO 5211 On request, possibility ...
THERMOMESS S.r.l.
DN: 25 mm - 1,000 mm
Pressure: 20 bar
Temperature: 200 °C
... elastomer materials Insulatable according to EnEV Face-to-face length according to DIN EN 558-1-R20 Mounting flange for actuators according to DIN EN ISO 5211 Inspection according to DIN EN 12266 ...
Herberholz GmbH
Pressure: 150 psi
... accessories ● Pneumatic actuator max,Air Supply pressure 8 kg/cm 2 , min.air pressure 4 kg/cm 2 ● Electric actuator operation voltage 1-phase 110/220V 3-phase 220/380/460V ● Electric ...
DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
... extraction of the valve by means of 4 screws while the flanges welded to the installation remain fixed. Sanitary butterfly valvescan be operated automatically through an actuator (sanitary pneumatic butterfly valve, ...
INOXPA
DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C
... • wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 series 20, ISO ...
DN: 0.5 in - 30 in
... Wcb API600 Class 600lb Cast Steel Gate Valve , Manual Actuator 4 Inch Gate Valve Product Details: Place of Origin: - Wenzhou China Brand Name: - JIEYU Certification: - API ISO Ts CE Payment ...
Zhejiang Jieyu Valve Company
DN: 15 mm - 65 mm
Pressure: 6 bar - 8 bar
Temperature: -15 °C - 225 °C
... Body in microcast stainless steel CF8M/316 Actuator in stainless steel AISI 304 Normally-closed, normally-open, double-effect function Seal in modified PTFE or PEEK Packing in PTFE and FPM Guided shaft for stable axial movement Self-centering ...
Pressure: 4 bar - 6 bar
Temperature: -30 °C - 150 °C
... drive the valve open or closed. Actuator can be double acting and single-acting spring return type, also can drivenintelligentpositioner through the external input signal to control the pneumatic driving. c) GID series ...
DN: 46 mm - 230 mm
Pressure: 2,000 psi - 20,000 psi
Temperature: -46 °C - 121 °C
... standard API6A Gâte Valves including FC Style Gâte Valves, FLS-R Valves, Hydraulic Valves, Expanding vales. FC valve 1.Full-bore design, effectively eliminate the ...
DN: 1 in - 4 in
Pressure: 10,000 psi - 20,000 psi
Temperature: -29 °C - 121 °C
... Plug Valve is an important high pressure part for well service to allow and stop flow by plug rotation. Jereh plug valves are made from premium alloy steel, with special coating and heat treating process which greatly ...
Yantai Jereh
the best suppliers