Adjustable feet

Load capacity: 400 kg - 2,500 kg
Diameter: 25 mm - 125 mm

Material: Black Thermoplastic. Zinc plated steel stud or stainless steel stud. Note: For certain minimum quantities special studs lengths available upon request. Version PRSTA with anchorage. For more technical information you can ...

Load capacity: 1,200 kg - 2,500 kg
Diameter: 80 mm - 125 mm

Gamm presents the new range of articulated feet model PRST. Material: Black Thermoplastic. Zinc plated steel stud or stainless steel stud. Note: For certain minimum quantities special studs lengths available upon request. Version PRSTA ...

Diameter: 8, 10 mm

The PRTN adjustable feet is made up of black thermoplastic and an aluminum steel base. It can also be supplied with pins of various projection, we can provide up to maximum of 70mm for special measures and required minimum ...

Diameter: 8, 10, 16 mm

... Knuckle Foot X D40, M8x60, grey similar to RAL 7042 Knuckle Foot X D40, M8x80, grey similar to RAL 7042 Knuckle Foot X D40, M10x80, grey similar to RAL 7042 Knuckle Foot ...

Load capacity: 150 kg
Diameter: 39 mm

Special Adjustable Feet Special Adjustable Feet for special requirements. From simple height adjustment to robust machine fastening – the Adjustable Feet from item always offer the ...

Diameter: 80 mm - 120 mm

... at the base. - LMY-EH: with hexagon upper end and spanner flats at the base. - LMY-HV: with AISI 303 stainless steel adjustable sleeve for the protection of the threading and spanner flats at the base. - AS index: ...

F1 is crafted from PA-6 with 30% glass fibre and the F2 product is crafted from PP and metal. The color is black. As for the application, while the F1 model can be positioned in literally any angle needed, the F2 model is perfectly suited ...

... levelling feet are suitable for tables and lighter installations. The foot height is adjusted by turning the base nut by hand or spanner. The pins on the top flange centre the foot and prevent it turning. ...

Diameter: 30 mm - 50 mm

... Thermoplastic plate black. Die-cast zinc plate blue galvanized. Stainless steel plate bright. Note for ordering: If the levelling foot plate and the threaded spindle are to be supplied assembled, please add the suffix ...

Diameter: 80, 100, 120 mm

... thread and the special seal on the machine foot's spindle joint prevent dirt from sticking and reduce cleaning times to a minimum. The machine foot is supplied with the 3-A logo. Application: The machine ...

Load capacity: 0 kg - 600 kg

Flexible leveling feet Swiveling, leveling adjustable feet to compensate for uneven floors Swivel range : ± 4 ° to 20°. Adjustable foot plate: different shapes possible from ...

Load capacity: 1,000 kg - 2,000 kg

A leveling foot for slightly uneven floors, conductive, with nut DIN 439 (ISO 4035) form B Material Base: Zinc plated steel Threaded rod: Zinc plated steel Pack Quantity 10 pieces

Support element with fine thread and base element 6425FB Body and base element, tempered steel, burnished. Spindle and bearing smooth, tempered steel, plasma-nitrided and burnished. Application: Can be used on T-slots and ...

Load capacity: 459 kg - 6,118 kg
Diameter: 76 mm - 230 mm

PRG Jacmount® Adjustable Levelers are designed to make it easy, economical and reliable to set up your machine or system. The patented connection between leveler and levelling stud is permanent, has a high load capacity, ...

Load capacity: 2,294 kg - 7,138 kg
Diameter: 129 mm - 239 mm

PRS Jacmount® Adjustable Levelers are a new development from AirLoc, especially for machines with high dynamic horizontal force. The robustly designed base plate is permanently connected to a pressure plate by means of ...

Load capacity: 2,294 kg - 7,138 kg
Diameter: 129 mm - 239 mm

PRSK Jacmount ® Adjustable Levelers from AirLoc are specially designed for machines which require high dynamic and horizontal force. The leveller with spherical seat top parts are ideal for compensating ground unevenness ...

Use: to be fitted on the 25x25x1.2 stainless steel tube. Material base in reinforced polyamide, anti-slip material in thermoplastic elastomer, stainless steel rod, reinforced polyamide cap. State of supply complete with nut, washer, ...

mk offers a large selection of levelling feet, floor plates and the corresponding accessories needed to stabilise or firmly anchor your machine frames, belt conveyors, industrial workstations and much more. All levelling feet have an ...

The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.

The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.

Load capacity: 2,300 lb - 10,000 lb
Diameter: 1 in - 3 in

Tru-Center™ Threaded Leveling Pads Material: 4140 Finish: Zinc Plated Pad Heat Treat: Rc 36-40 Thread: UNC-2A (Metric: 6g) Available in FixtureProDesign Software and PartSpec CD

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, flange protectors, ...

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, flange protectors, ...

Diameter: 38 mm

... applications such as machinery/conveyors. Coming with an 'articulating base' each foot allows for up to 8° of movement which can adjust for rugged or un-even flooring. As an adjustable product these feet ...

Diameter: 20, 30, 50 mm

... soft surfaces (recommended mainly for Wood, Carpet and Tiled floors).These Teflon Adjustable Feet.offer the ability to add a foot to an otherwise threaded application such as a Furniture Leg, but are ...

Our Round Teflon Furniture Sliders are the ideal product for the moving of furniture, appliances, and machinery. They are manufactured from a high quality PTFE and EVA Foam. Teflon is a material renowned for its frictionless movement, ...

Load capacity: 400, 550, 650 kg
Diameter: 8 mm - 10 mm

ADJUSTABLE FEET - FIXED BASE ON THREAD Material: Base : PP black Screw : Zinc-plated steel Dimensions : metric Adjustable feet with fixed base on thread Ref. PDA fixed base - PDB : movable base Load ...

Load capacity: 400, 550, 650 kg
Diameter: 10, 12, 8 mm

PDB ADJUSTABLE FEET - MOVABLE BASE WITH THREAD Material: Base : PP black - PA black (available for PDB58) Screw : Zinc-plated steel Dimensions : metric Adjustable feet with movable base with the ...

Load capacity: 400 kg - 500 kg
Diameter: 8 mm - 20 mm

ADJUSTABLE FEET - SWIVEL THREAD WITH MOVABLE BASE WITH THREAD Material: Base : PA black - PA black glass fiber reinforced (From M16) Screw : Zinc-plated steel or PA black glass fiber reinforced (From M16) Dimensions ...

Diameter: 50 mm - 150 mm

Machine levelling feets, adjustable, of stainless steel, with non-slip rubber base Standard material Stainless steel 1.4301

Diameter: 50 mm - 120 mm

Machine levelling feets, adjustable, of steel, foot painted Standard material threaded bolt Galvanized steel

Load capacity: 1,000 kg
Diameter: 80, 32, 50, 40 mm

Adjustable bolt with reinforced polyamide base and treated steel spike. Also available in different metrics and diameters. Max. Static: 10,000 N (vertical axis). Optional: Black non-slip rubber. It is supplied as an ...

Load capacity: 1,000 kg
Diameter: 80 mm

Adjustable bolt with reinforced polyamide base, treated steel spike and fixing holes. Also available in different metrics and diameters. Max. Static: 10,000 N (vertical axis). Optional: Black non-slip rubber. It is supplied ...

Load capacity: 1,300, 1,100, 1,200, 1,000 kg
Diameter: 50, 40 mm

Adjustable bolt with reinforced polyamide base, galvanized steel or stainless steel spike. Also available in different metrics and diameters. Max. static: 1,200-2,700 N (vertical axis). Using a hammer you can open the ...