Air and gas valves

DN: 8 mm - 65 mm
Pressure: 0 bar - 30 bar
Temperature: 0 °C - 120 °C

30 BAR BRASS BALL VALVE - MIHA BRAND Specification Used for water, steam, gas Standard: BS 5154:1991 Threads standard: BS 21/ ISO 228-1-2000 Max. working pressure: 30 bar Max. working temperature: 120oC Origin: ...

DN: 0.5 in - 8 in

... Emissions : ISO 15848 / TA-LUFT ATEX INDUSTRIES Oil & Gas Chemical & Petrochemical Pulp & Paper Energy & Renewable Food & Pharma Marine Tank terminals Mining Waste treatment Special fluids transport Oil & Gas Chemical ...

DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F

... include high tensile type 316 stainless steel for the valve body and hardened 17-4PH stainless steel lower section stem. Air operators for remote control operation are available for all valves. ...

The twenty-year long experience of Negri Fratelli at manufacturing fully welded ball valves for natural gas has produced a new solution: a carbon steel ball valve with PE ends suitable ...

DN: 0.5 in - 4 in
Pressure: 1,000, 800, 600 psi
Temperature: -20 °F - 450 °F

... Actuators to Valves For Food and General Chemical Service Applications Adjustable Stem Packing Blow-Out Proof Stem Design In-Line Repairable Available In Stainless Steel Body Construction ...

Pressure: 0.5 bar - 16 bar

... Drain valves serve to remove compressed air condensate from filters and filter pressure regulators on the equipment of all ewo series in all sizes. • Manual drain valves ...

... two-way ball valves. They are commonly used in food processing and wine industry. The products can also be modified to introduce a variety of features that are not included in the catalog, such as the standard threads ...

DN: 25, 40, 50 mm
Temperature: -20 °C - 60 °C

Reduced bore gas ball valve for riser pipe, with sealable cap, female threaded and PE connection, with fitting for protective steel pipe.

DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C

Side Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar
Temperature: 130 °C

... Standard control cone with equal percentage Sealing geometry optimised for all required process conditions Two-part valve disk, screwed, with a defined space for the sealing ring for easy installation Allocation ...

DN: 50, 63 mm
Pressure: 10 bar - 30 bar
Temperature: -20 °C - 65 °C

... Pilot-operated Valves for Start Valves Pilot-operated Valves for air starters Main Start Valves with or without Slow-turn ...

DN: 0.25 in - 2 in
Temperature: -20 °C - 60 °C

Full bore brass ball valveDiameters from DN008 - ¼" to DN050 - 2"Threaded F/F (ISO 228/1)Design according to EN331Air testing according to EN12266-1Blow-out proof stemWith handle or butterflyAlso available with lockable ...

DN: 0.125 in - 4 in
Pressure: 0 bar - 2,500 bar
Temperature: -250 °C - 450 °C

Floating ball valves are the most common type of ball valve used to cut off flow in pipes. They are quarter-turn valves. The ball is perforated, so when the valve is ...

DN: 50 mm - 500 mm
Pressure: 10, 6 bar
Temperature: 180 °C

One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For ...

DN: 0.5, 0.75, 1, 1.25 in
Pressure: 1.6 MPa
Temperature: 1 °C - 130 °C

HTW-EG200 Series Motorized Ball Valves are used to control the on/off of heat/cool water air-conditioning system pipe to control the room temperature. The valve is driven by synchronous ...

... One Piece Shaft (14" and above) Position Indicator ISO 5211 Top Flange The NUTORK double offset butterfly valve is a high performance valve that offers superior service life and is trouble-free to ...

Pressure: 17, 20 bar
Temperature: 210, 220 °C

The GD-30 and GD-30S are compact, high-performance direct-acting valves. Economical to buy and use, it is ideal for those low- to moderate-flow applications where accuracy of +/- 10% is acceptable. The GD-30 and GD-30S ...

DN: 50 mm
Pressure: 6,300,000 Pa - 16,000,000 Pa
Temperature: 100 °C

ADVANTAGES Most practical for the natural gas pipelines under pressure of 16 MPa and working medium temperature up to +100ºC Reliable for operation at the critical sectors of the pipeline Complete tightness ...

DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C

• wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 ...

DN: 8, 10, 15, 20, 25 mm
Temperature: -20 °C - 60 °C

Full bore ball valve for gas, F/F threaded, with aluminium T-handle.

DN: 0.5 in - 2 in
Pressure: 16, 12.8 bar
Temperature: 120 °C - 200 °C

DN: 0.25, 0.125 in

Made of extruded brass (CLA-360) and forged brass (CLA-377). Ideal for compressed air, oil, water and vacuum systems. Allows the control of ideal flow according to the requirement of the system.

DN: 27 mm
Pressure: 400,000 Pa - 600,000 Pa
Temperature: -25 °C - 85 °C

Abstract： Electromagnetic pulse valve modelDCF-ZM-20Connecting the vent tube outer diameter（mm）Φ27size（mm）A67B45C26D26E162F1 technical standard Working pressure: 0.4~0.6MPa Working medium: clean air ...

DN: 2 in - 72 in

Valves, Gaskets, Screws Pipes (seamless and welded) - Heat Exchanger Tubes - Elbows - Reducers - Tees - Flanges - Bends - Special items as per drawing - Valves and Actuators - Any other Piping ...

DN: 50 mm - 1,000 mm

... Segment Ball Valve is a high performance valve we have developed with advanced technology.It also called eccentric ball valve ,semi ball valve ,half ball valve ...