Air and gas valves

DN: 0.25, 0.5 in
Pressure: 150 bar
Temperature: -75 °C - 190 °C

The M Valve is a miniature air operated proportional control valve for use on liquids or gases. Available for 1/4and 1/2line sizes, a wide range of inner valve ...

Stainless Steel Waist Drum Angle Seat Valve Features: Compact and lightweight Large flow and low resistance long lasting... Interface: DN15--DN50 Body material: stainless steel 304 Pneumatic ...

Pressure: 0 bar - 15 bar

Maximal inlet pressure (bar) : 15 Outlet pressure (bar) : 0 - 15 Maximum discharge (nm3/h) : 20 Gas compatibility : Non corrosive gas + O2 (C2H2 excluded)

DN: 6 mm - 100 mm
Pressure: 14, 16, 18, 40 bar

* Ball valve made of brass * Full port design * Female threaded acc. to DIN ISO 228 * Lever Handle (red) * Marking according to DIN EN 19 * Blow-out proof stem with double O-ring sealing ...

DN: 14 mm - 85 mm
Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C

BRASS BALL VALVES Size:1/2“-4” [Technical Specification] Material Normal brass ; CW617N ;DZR Working Pressure PN25 or 2.5Mpa Seal PTFE Application Water ; Gas ; Oil Working ...

ThreadNPT FlowFull ConnectionsFxF ApplicationGas Stem configurationPacking Gland HandleLever BodyBrass ProductBall Valve Size 1/4" - 4'

... with the major suppliers in the industry in North and South America for weir type diaphragm valves and we have recently gained approval to mark CE on our valves in accordance to the PED on this product ...

Pressure: 5 psi - 2,000 psi

... pressure-reducing regulator that provides accurate regulation and tight shutoff on low- or high-pressure systems. Use on air, natural gas, or a variety of other gases. The Mark 627 handles inlet pressures ...

DN: 150 mm - 1,200 mm

... high cycle and smooth operation ● Reliability: Reliability of valve operation affects service life and ease of inspection and maintenance. In order to predict reliability, a sound valve design must ...

DN: 40 mm - 200 mm

DN: 0.5 in
Pressure: 2 bar - 10 bar
Temperature: 75 °C

... clients that are very effective in the purification of air by removal of pollutants. For instance, automatic drain valves, electronic drain valves, air drain valves ...

DN: 20 mm - 25 mm
Pressure: 13 bar
Temperature: -30 °C - 80 °C

We only produce compressed air piping system network, and this product is one of the components. AIRPIPE quickl valve can be installed in the piping and some important position such as outlet of compressor ...

Pressure: 1 bar - 8 bar
Temperature: 0 °C - 60 °C

Features ● It works together with ZVAB-NC. ● ZVAB-NC provides an air control signal to realize the opening and closing of the control valve and save energy.

DN: 1.5 in
Pressure: 16 bar
Temperature: -40 °C - 250 °C

The Perolo ND40 ATCO FULL BORE self-contained ball valve is designed to be used as an air inlet or as a fluid inlet/outlet valve. With its MAWP of 16 bars, this valve ...

DN: 0.5 in - 8 in
Pressure: 0.5 bar

Gas shut off valves N.C. with manual reset. Normally closed: must be continuosly powered to allow the gas flow. Power consumption: 19VA. Max working pressure 500mBar.

DN: 15 mm - 50 mm
Pressure: 800 psi

... Metal Application - Gas Fitting, Oil Fitting Color - Silver Pattern - Plain Power - Hydraulic Pressure - High, Low Features - Blow-Out-Proof, Casting Approved, Durable If you are looking for MNC 3 Piece Forged ...

Pressure: 0 bar - 7 bar

... microfluidic valve for injection or selection of up to 10 different fluids or chips. The flow is bidirectional in the valve. The device can be used as a selector or as a distributor for either multiplexing ...

DN: 15 mm - 600 mm
Pressure: 25, 40, 16 bar
Temperature: -20 °C - 425 °C

... Operated type - Handwheel Structure - high temperature medium Flange connection - EN1092 PN16, PN25, PN40 Medium - Water, Oil, Gas

... improved valve life. Pneumatic Actuators for Remote Valve Operation Types Normally Closed – Air is required to open the valve Normally Open ...

FEATURES： (a) The air from system could be trapped when slide valve is in close position. (b)The remaining air pressure in downstream equipment could be released by slide valve. ...

DN: 15 mm - 700 mm
Pressure: 16, 25, 40 bar
Temperature: -60 °C - 80 °C

Ball Valve Flange/Flange MATERIAL SPECIFICATION (climate class N) Body: carbon steel 20 (1.1151) Stem: stainless steel (AISI 420) Ball: stainless steel DN 15-32: AISI 420; DN 40-65: AISI 304; DN 80-700: ...

Pressure: 140 bar

... version for operation with CO2 refrigerant at high absolute and differential pressure values, combining the versatility and efficiency of the E2V valve with the latest concerns for energy saving and ...

Pressure: 0 psi - 145 psi
Temperature: -20 °C - 70 °C

1、Exhaust outlet locates over the body, which is convenient to install muffler to decrease noise and pollution; 2、The external force required by direction-change of series of M5B, M5R and M5L is provided by external mechanism, which ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: -60 °C - 80 °C

... Filter Regulators Filters Volume booster Lock-up valves Unidirectional and bidirectional flow regulators Quick Exhaust valves Shavo's Lockup Valve retains set supply air ...

DN: 15 mm - 150 mm

FEATURES & BENEFITS Class 150 to Class 2500 Size Range ¼” thru 10” (Class Dependent) Full and Reduced Bore Body Wall Thickness ASME B16.34, Forged or Cast Versions End Connections: SW, BW, RF, RTJ, NPT, BSP, Special Fire-Safe Design ...