Air and gas valves

DN: 40 mm - 250 mm
Pressure: 10 bar
Temperature: 70 °C

O-ring spindle’s gaskets - “DRY THREAD” - replaceable under pressure. Spindle with rolled thread and bearing. Wedge with replaceable spindle nut. Drain plug - on request. Marine execution for hot seawater.

DN: 6, 8 mm
Pressure: 20 psi - 30 psi

... Miniature Pinch Valve is a solenoid operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts ...

DN: 0.75 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 145 °C

proportional motorised valve 3/4" inch made of stainless steel to control the flow in the system up to 6000 l/h with an setpoint of 0 - 10 volt FKM/FPM seal: - FKM/FPM setpoint: - 0 - 10 volt voltage: - 24V DC ...

DN: 15 mm - 200 mm

... Ability: - 10000PCS/Mouth Silent Stainless Steel Swing Check Valve API 6D/ ANSI 16.5 B/ JIS 20K/JIS 10K /DIN Stainless Steel Swing Check Valve Application: The Check valve ...

DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 100 °C

Two-way control valves with one-seat design A. Hock Series 2000 valves are our two-way control valve all-rounders. Available in both standard and more complex versions, the valves ...

DN: 15 mm - 150 mm
Pressure: 16 bar

Ex-proof electric ball valve design with ISO 5211 platform to make the actuator directly installed. Mainly used to cut off or adjust the direction of the medium in pipeline, valve structure is easy operation ...

DN: 1.81 in - 7 in
Pressure: 2,000 psi - 20,000 psi
Temperature: -46 °C - 121 °C

Hydraulic safety valves are made according to API 6A. When oil and gas leaking or firing, used for security protect on well site, the control system includes low pressure control valves, ...

DN: 450 mm

Electric actuated triple eccentric hard (metal) seal butterfly valve / perfect seal Features Hard seal valve  - Triple eccentric and low torque design  - Stem design: Available in square shaft ...

The 5A regulation valve is ideally suited for regulating the flow of gases and liquids. Due to its special design it is able to regulate and shut off media. The regulation valve is highly resistant to ...

DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -60 °C - 280 °C

... body threaded ball valves are available in sizes from DN8 to DN100 with BSP threaded end connections. Face to Face Dimensions are according to DIN3202-M3 and PN63 working pressure. Ideally suited to be used as a manual ...

DN: 0.75 in - 6 in
Pressure: 0 psi - 600 psi

The LSV-100® Control Valve is an economical control valve designed for flanged applications. Trim is replaceable in the field through the bonnet. Construction is Carbon or Stainless Steel with stainless ...

DN: 15 mm - 100 mm
Temperature: -20 °C - 300 °C

... Model NO.: Q41F Connection Form: Flange Nominal Pressure: 150lb to 2500lb Structure: Floating Ball Valve Function: Blow-Down Valve Application: Industrial Usage, Water Industrial Usage Class: ...

DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 170 °C

... wafer butterfly valves in Series J9 are equipped with a centred disc and wafer type body, and are made of ductile iron or stainless steel, manufactured in accordance with severe product norms and in conformity to EN ISO ...

Pressure: 6, 10 bar
Temperature: 0 °C - 240 °C

... pressure tight chamber valve is flanged directly at the reactor inlet. - Continuous entry in a pneumatic conveying system in combination with the solids blow through rotary valve, that ...

DN: 15 mm - 200 mm
Pressure: 5.5 bar - 76 bar
Temperature: 38 °C

... Piston Valve (PPV) is a linear movement valve in which a stainless-steel piston travels between the upper and lower seal ring. These rings are separated by a lantern bushing, which supports the piston ...

DN: 80 mm - 1,600 mm
Temperature: 250 °C

... butterfly valve with a one piece body and an eccentric soft seat. It is specially designed for industrial gas applications featuring long-lasting tight shut-off capability, excellent flow characteristics ...

Pressure: 30 bar
Temperature: -20 °C - 130 °C

... coated Steel Stem : - Nickle-plated brass Bail seals : - PTFE Stem seals : - PTFE Specifications Fluids : Compressed air, gas, water, oil and ail fluids suitable with constituent materials Working ...

DN: 15 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C

Angle globe valve in PN16 with stainless steel trim.

Wafer Segment Ball Valve Segment Ball Valve (Wafer Segment Ball Valve) is a throttling control segmented ball valve that provides high flow capacity with optimum characteristics ...

DN: 125 mm - 500 mm
Pressure: 25, 16 bar
Temperature: -60 °C - 200 °C

STANDARD BORE BALL VALVE 282 WELDED CONNECTION Working medium District heating networks, petroleum products, combustible and lubricating materials, other fluids free from abrasive contaminants. Natural gas, ...

DN: 25 cm - 100 cm
Pressure: 16, 40 bar
Temperature: -29 °C - 180 °C

... full bore, DIN flanged ball valve. The range comprises from DN 25 to DN 100, varying its floating valve design from DN 65 where the sphere is guided for better performance, suitable for conducting aqueous ...

DN: 40 mm - 300 mm
Pressure: 40 bar
Temperature: -40 °C - 170 °C

The Ramén Ball Sector Valve in material configuration 1 is a stainless steel, soft seated control valve with a carbon/graphite reinforced PTFE seat with Viton® (FKM) o-ring seals and a media protected ...

DN: 0.25 in - 0.5 in
Pressure: 980,000 Pa
Temperature: -10 °C - 60 °C

... Tag-out) valve for safety. When the valve is closed, the handle goes down and the key hole can be seen. -When opening the valve, pull up the handle and turn it. -By passing through ...

DN: 15 mm - 350 mm
Pressure: 1.6 bar - 26 bar
Temperature: -196 °C - 650 °C

P4/J4 series caged globe valve adopted unbalanced trim design, special valve trim and cage top guide structure, offering good dynamic stability. The cage also plays anti-erosion and cavitation roles. ...

DN: 50 mm - 1,400 mm
Temperature: -196 °C - 593 °C

Product type On/Off Type Product description Top-entry Ball Valve Model SQ*47F/H Size NPS 2～NPS 56