- Hydraulics - Pneumatics >
- Valve >
- Air and gas valve
Air and gas valves
DN: 20 mm - 200 mm
... style control valves, the GS-General Service Valves combines advanced levels of body configuration, trims and actuation to produce a valve assembly capable of premium performance at a ...
DN: 2 mm - 30 mm
This bi-directional valve is ideal for controlling varying flow rates of gas, liquid and slurries. Rangeability in excess of 350 to 1 Cavitation and noise reduction trim available Bi-directional ...
DN: 20 mm - 500 mm
The SD-Severe Duty valve is Copes-Vulcans premium severe duty and critical service control valve design. While virtually identical in outward appearance to the Copes-Vulcan legendarily rugged and dependable ...
DN: 17 mm - 59 mm
Pressure: 1 bar - 16 bar
Temperature: -20 °C - 80 °C
2/2-way ball valve with full bore Producer Medium:Compressed air, vacuum, inert gases Material of seal:NBR Material of locking ring:Stainless steel 1.4301 Material of O-ring:NBR Material of retaining ...
DN: 0.5 in - 2 in
Pressure: 5 bar
Temperature: -5 °C - 60 °C
... heavy-type gas ball valves constructed out of brass. It is used together with a steel pipe, but it can also be used with a copper pipe if the pipe has an ISO 7 male conical fitting. It is ideal to be ...
SFERACO
DN: 15 mm - 50 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
The pinch valves from Ross has a compact and economical design that is utilized for a broad range of applications in the industrial automation industries. It is ideally used for compressed air ...
ROSS EUROPA
DN: 50 mm - 80 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01): Aluminum alloy. Threaded cap (03): POM (polyoxymethylene). O-Ring (06): NBR (nitrile rubber). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Female threads, DIN ...
ROSS EUROPA
DN: 40, 32 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01), Flange (04): POM(polyoxymethylene). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Flange, (DIN PN 10/16). Ambient temperature: -20° to +50°C. Media temperature: ...
ROSS EUROPA
DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C
Sealing form 1 - 3 Shape A Connection 1 - 3 BSP cylindrical internal threads Bore L shaped Contact travel 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, ...
DN: 10 mm
... CONTAMINATED AIR UNIQUE MOUNTING The BV10 represents yet another evolution in air valve technology from MAC. The Bullet Valve® utilizes “lifting” solenoid technology. ...
DN: 15 mm - 200 mm
Temperature: -10 °C - 400 °C
KLINGER® piston valves Piston valves stand for excellent industry performance with their minimum maintenance requirements and production savings. KLINGER piston valves are characterized ...
DN: 8 mm - 19 mm
Pressure: 0 bar - 40 bar
Brass diaphragm valve For non corrosive gases and gas mixtures up to quality 6.0 Suitable for pressures up to 40 bar Wide range of in- / outlets Metal-to-metal sealing to atmosphere ...
Spectron Gas Control Systems GmbH
DN: 3 mm
Pressure: 0 bar - 200 bar
Brass control valve (e. g. for the pressure regulator outlet) For non corrosive gases and gas mixtures up to qualität 6.0 Suitable for pressures up to 50 bar (control valve) or 200 bar ...
Spectron Gas Control Systems GmbH
DN: 8 mm - 19 mm
Pressure: 1 Pa - 4,000,000 Pa
Product features Stainless steel diaphragm valves For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable for pressures up to 40 bar Wide range ...
Spectron Gas Control Systems GmbH
DN: 0.5 in - 1 in
... B6301 2-Piece, Full Port, Bronze Ball & Waste Ball Valves are used in commercial, and industrial applications. It features a drain port to allow for draining or venting of downstream line when valve ...
Watts Water Technologies
Special valve that lets the first delivered compressed air escape so that the compressor will start more easily. Is mounted on the non-return valve.
AIRPRESS
DN: 8 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 150 °C
... reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. This ...
VALSTEAM ADCA Engineering S.A.
DN: 65 mm - 80 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 150 °C
... reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. This ...
VALSTEAM ADCA Engineering S.A.
DN: 15 mm - 50 mm
Pressure: 0.3 bar - 5 bar
Temperature: 0 °C - 180 °C
... sensing pressure sustaining valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the ...
VALSTEAM ADCA Engineering S.A.
DN: 15 mm - 50 mm
Pressure: 16 bar
... Actuator Ball Valve , Motorized Electric Ball Valve Motorized Electric Ball Valve Feature 1. Blowout prevention valve stem:We have designed a spray-proof boss on ...
pneumaticairactuator.com
DN: 0.5 in - 2 in
Pressure: 16 bar
... industrial mini auto control equipment. 3. Water saving equipment, drinking water equipment. 4. Air-conditioning fan coin(HVAC). Electric Actuator Ball Valve Advantages: Product quality ...
pneumaticairactuator.com
... other similar metal valves. details 1. Sealing surface material: two kinds of structural ceramics or super-hard surface alloy materials. 2. It is suitable for gas and solid mixed ...
pneumaticairactuator.com
DN: 15 mm - 50 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 130 °C
... the GAMMA membrane valve allows advantageous membrane support in both end positions. The optimum heat dissipation of the open membrane, which is in contact with the housing, reduces the thermal load. This makes the GAMMA ...
AVS Römer
DN: 15 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C
In media-separated piston valves, a pivoted lever in conjunction with the membrane fitted on it ensures low-friction power transmission with high tightness. Due to the “lever arm effect”, only a small dimensioned pneumohydraulic ...
AVS Römer
DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C
... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...
AVS Römer
DN: 0.25 in - 0.75 in
Pressure: 40 bar
Temperature: -20 °C - 80 °C
Threaded BSP or NPT direct action pressure regulator valve for steam, gases and liquids for reduce pressure in lines available in different materials and pressure ranges self-actuated.
EFSVALVES
DN: 0.5 in - 1 in
Pressure: 16 bar
Temperature: -10 °C - 210 °C
Threaded BSP/NPT or flanged direct action pressure regulator valve for steam, gases and liquids for reduce pressure in lines available in different materials and pressure ranges self-actuated.
EFSVALVES
DN: 0.5 in - 1 in
Pressure: 16 bar
Temperature: -10 °C - 180 °C
Threaded BSP / NPT or flanged direct action pressure regulator valve for steam, gases and liquids for reduce pressure in lines available in different materials and pressure ranges self-actuated.
EFSVALVES
Temperature: 180, 260 °C
... electrical or pneumatic compact actuator, multiple valves can be installed in a constrained space, replacing existing diaphragm valve Typical applications Ultra-trace permanent ...
... style control valves, the GS-General Service Valves combines advanced levels of body configuration, trims and actuation to produce a valve assembly capable of premium performance at a ...
CELEROS
Pressure: 2,500 psi
... Copes-Vulcan Model F100-40 Sampling Valve was developed to provide positive shutoff and reliable operation for both sampling and containment isolation applications in nuclear power plants. Such high-pressure water, ...
CELEROS
DN: 2 in - 84 in
The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed to simplify installation and upgrades, ...
CELEROS
DN: 40 mm - 800 mm
Pressure: 16 bar - 100 bar
STANDARDS OF MANUFACTURE EN 1171 (ISO 1083) CARBON STEEL GATE VALVES EN 1074-2 ISOLATING VALVES EN 1092-1 (ISO 7005-2) DRILLING FLANGES FEATURES FIG. 27-28-31-32-33-34-35-36 MATERIALS BODY ...
... transferring to a keg, or ball lock disconnects for gas and for liquids. With the spunding valve, it is possible to get natural carbonation in the fermentation tank, by fermentation. ...
DN: 0.375 in - 3 in
Pressure: 0 bar - 14 bar
Temperature: -10 °C - 160 °C
Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, ...
RIEGLER & Co.KG
... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various ...
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
... leakproofness class – A acc. EN -12266 – 1) •compact settlement •environment-friendly •tests acc. EN – 12266 – 1 Stop valve, ends threaded, form straight 201 Grey cast iron EN-GJL-250 A Nominal diameter (mm) 050 Nominal ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C
... drilled according to EN 1092-1 for body material F •face-to-face dimension according to EN 558 series 1 Bellow sealed stop valves, ends flanged, form straight 215 Grey cast iron EN-GJL-250 A Stem and disc connection ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 10, 25, 16, 6 bar
Temperature: -60 °C - 450 °C
... acc. EN – 12266 – 1 •flanges drilled according to EN 1092-2 •face-to-face dimension according to EN 558 series 8 Stop valves, ends flanged, angle form 216 Grey cast iron EN-GJL-250 A Stem and disc connection - ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 50 mm
Pressure: 40, 16 bar
Temperature: -10 °C - 400 °C
KLINGER KVN DN15-50 Piston valves, flange design. Features DN 15 - DN 50 piston valve valve rings KX-GT piston made of special niro-steel FTF dimensions acc. to EN 558, GR.1 flanges ...
KLINGER-SCHÖNEBERG GmbH
DN: 65 mm - 150 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C
KLINGER KVN DN65-150 Piston valves, flange design. Features DN 65 - DN 150 piston valve valve rings KX-GT piston made of special niro-steel FTF dimensions acc. to EN 558, GR.1 flanges ...
KLINGER-SCHÖNEBERG GmbH
DN: 20 mm - 25 mm
Pressure: 25 bar
Temperature: -10 °C - 210 °C
INTEC K204-S-D - Steam Ball Valve Steam ball valve, which protects your resources! The maintenance-free steam ball valve for the safe relaxation of steam-prominent elastomere hoses. Product ...
KLINGER-SCHÖNEBERG GmbH
DN: 100 mm - 300 mm
Pressure: 102 bar
Temperature: 60 °C
... intercepts gas flow when the pressure it is monitoring reaches a preset limit due to an anomaly in the system, or when required by the operator at the installation point or from a remote point. HBC 975 is a safety ...
PIETRO FIORENTINI
DN: 2 in - 24 in
... Shut Down Valve) and HIPPS (High Integrity Pipeline Protection System) systems. Fields of application: • Natural gas industry; • Energy; • Petrolchemical industry; • Water transport. Deltaflux ...
PIETRO FIORENTINI
DN: 1 in - 8 in
Pressure: 102 bar
Temperature: -20 °C - 60 °C
CONTROL GAS VALVES Synchroflux Synchroflux valves are bypass and throttling devices suitable for use with previously treated, non-aggressive gaseous fluids. The main characteristics ...
PIETRO FIORENTINI
DN: 0.25 in - 0.5 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 80 °C
... rangeFluid : 5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Brass, Stainless Steel AISI 316 Seals: NBR MediaAir, gas, water, fuel, oil etc
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining