Air and gas valves

DN: 8 mm - 50 mm
Pressure: 0 bar - 40 bar
Temperature: -10 °C - 185 °C

... The pneumatically operated GEMÜ S40 globe valve is designed for use in industrial applications and has body configurations such as angled and straight seat bodies. The valve spindle is sealed by a self-adjusting ...

DN: 4 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 100 °C

... Diaphragm valve - 650 The GEMÜ 650 BioStar 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic ...

DN: 10 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 100 °C

... The GEMÜ 717 2/2 or 3/2-way plastic ball valve has an ergonomically designed hand lever and is manually operated. The seat is made of PTFE and the O-ring seals can be made from either EPDM or FKM. -Depending on version and/or operating ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C

... Body Material - SS ASTM A351 Grade CF8 / CF8M / CF3M Seal - PTFE / VITON Circumstance Temp: -10°C to 70°C Actuator Information > - Life: More than ten million cycle > - Other Technical Data: Available Available on request Adjust Stroke Limiter ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

... Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Body Material: - SS ASTM A351 Grade CF8 / CF8M > Seal: - PTFE / PEEK / VITON Actuator Information > - Cover: Nylon Glass-Filled (Corrosion résistive) with SS Liner > ...

DN: 2 in
Pressure: 4.5 bar - 7 bar
Temperature: -10 °C - 180 °C

... > - Port: Refer below technical data sheet (Available BSP / NPT) > - Body Material: SS ASTM A351 Grade CF8 > - Seal: PTFE / VITON > - CircumstanceTemp: -10°C to 70°C > - Leakage: As per ANSI B16.104 - 1976Teflon seating class IV. For other soft seating ...

DN: 0.125, 0.375, 0.5 in
Pressure: 7, 5, 10, 20 bar
Temperature: -20 °C - 84 °C

... Proportional Flow Control Valve consists of PM series driver and FC series proportional flow valve. With an input signal either through analogue or digital, the needle inside the proportional valve moves ...

DN: 6, 8 mm
Pressure: 20 psi - 30 psi

... Miniature Pinch Valve is a solenoid operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to ...

DN: 0.125 in
Pressure: 2 bar - 11.5 bar
Temperature: 0 °C - 70 °C

... built-in bleed version, the application does not consume any gas. The valve acts as pressure regulator with small exhaust capacity. Without built-in bleed version, the application consume gas or the gas ...

DN: 0 mm - 10,000 mm
Pressure: 2,500 bar - 4,200 bar
Temperature: 5 °C - 50 °C

... Product description
Needle valves provide a reliable means to shut off and regulate media. Designed specifically for extreme high‑pressure applications, these valves are used in demanding hydraulic systems such ...

DN: 0 mm - 10,000 mm
Pressure: 0 bar - 1,379 bar
Temperature: -73 °C - 232 °C

... manually closed or opened in either direction, WEH® needle valves reliably provide this function. The valves run smoothly and are highly durable because the valve needle is decoupled from the rotating ...

DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C

... with analogue control. Compressed air for remote control necessary. The stroke is made proportional to the flow through the paraboüc contour of the piston. The valve shuts tight and is of anti-water hammer design. Media compressed ...

Pressure: 0 bar - 40 bar
Temperature: 95 °C

... Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve ...

... Control Valves allow you to control the flow of compressed air directly from the blast nozzle using a deadman's handle. Designed and built in Great Britain out of high grade, non-corrosive aluminium, ...

... Control Valves allow you to control the flow of compressed air directly from the blast nozzle using a deadman's handle. Designed and built in Great Britain out of high grade, non-corrosive aluminium, ...

DN: 15 mm
Pressure: 6 bar

... Pneumatically actuated diaphragm valve with metric plain spigot ends for solvent welding, Double Acting. The CM/CP is a pneumatically actuated valve with a compact structure ...

DN: 12, 15 mm
Pressure: 6 bar

... structure of this valve permits easy installation even in highly confined spaces. The new compact and light piston actuator in PP-GR makes the CM/CP the ideal choice for applications requiring very frequent valve operation ...

DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C

... Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain functions 5/2 ...

Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C

... The quick exhaust valve allows to exhaust the air in the cylinder to increase the speed. We suggest the mounting directly on the cylinder’s supply ...

DN: 0.375, 0.5, 0.125, 0.25 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

... The stop valve is a pneumatic device that locks the cylinder’s stroke in case of pressure loss in the system. The valves are mounted directly on the cylinder’s supplying ports and do not interfere with ...

DN: 0.25 in
Temperature: 0 °C - 120 °C

... outlet is variable. Flow Rate: Liquid: Maximum 1000 cc/min water for 1/4"NPT, bigger than it on request Gas: Maximum 50 NL/min air for 1/4"NPT; 700NL/min air for 1/2"NPT Process Connection:1/4"NPT female, ...

DN: 0.75, 0.562, 0.375, 0.25, 1 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C

... a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped with regulating ...

DN: 0.25 mm - 14.3 mm
Pressure: 2,500 bar
Temperature: -252 °C - 650 °C

... The 36V system is a stainless steel valve that can be operated using a regulating shaft. It has non-rotating stem that provides dependability, and long service lifespans of the device. It can withstand extreme working conditions and temperature. ...

DN: 1 in
Pressure: 0 bar - 2,965 bar

... Maximator high pressure valves with métal to métal seats have a high level of safety and reliability under adverse operating conditions. These valves may be used both with gases and liquids. Traceability is ensured through ...

DN: 16 mm
Temperature: 0 °C - 150 °C

... any position because of their air tightness in both positions. The body is either made of solid aluminum or stainless steel (VE WIG). The stainless steel valves are tungsten inert gas welded from the ...

Temperature: -20 °C - 40 °C

... Vacuum Valves, 3 Channels, AG Series . Connection on the vacuum network . Electric control . Voltage: 12 VDC / 24 VDC ou 24 VAC / 110 VAC / 220 VAC . NO or NC for the vacuum or compressed air ...

Pressure: 3 psi - 30 psi

... proportionally to the air pressure: as the analog signal increases, the air pressure will rise and, consequently, as one of the two parameters decreases, the other will decrease. The signal will then flow into the pneumatic ...

DN: 10 mm - 65 mm
Pressure: 6 bar - 10 bar
Temperature: -20 °C - 130 °C

... Free-flow pneumatic valves are essential components for controlling and intercepting the flow of numerous types of fluids that can be found in various industrial sectors. Choosing which type of valve ...

DN: 15 mm - 100 mm
Pressure: 5 bar - 10 bar
Temperature: -10 °C - 180 °C

... wear, oxidation • - Low air consumption • - Technopolymer actuators (size 40-50-63-80-100) with visual indicator • - Tilting shutter with PTFE-C755 seal (Teflon + Graphite 30%) • - Wide range of accessories: Namur solenoid valves, ...

DN: 0.063, 0.125 in
Pressure: 0 bar - 8.6 bar

... and reduce the likelihood of vibrations causing a change in the flow rate. All of the Air Logics products are assembled and tested in America. Plastic needle valves are tested for sealing and performance. Media Gases ...

DN: 0.063, 0.125 in
Pressure: 0.5 psi - 100 psi
Temperature: 40 °F - 120 °F

... and changes the pneumatic state. The signal pressure and pneumatic circuit are completely isolated from each other. The pneumatic circuit is normally open, which means the supply port is open ...

DN: 0.063, 0.125 in
Pressure: 0.5 psi - 100 psi
Temperature: 40 °F - 120 °F

... moves and changes the pneumatic state. The signal pressure and pneumatic circuit are completely isolated from each other. The pneumatic circuit is normally closed, which means the supply port ...

DN: 10 mm - 45 mm
Pressure: 0 bar - 60 bar
Temperature: -20 °C - 220 °C

... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Actuation up to max. 8.4 bar Materials Ball made of brass (Ms58), chrome layer Handle made of aluminium, painted Seal ...

DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C

... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in general Valves ...

DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C

... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in general Valves ...

Pressure: 0 bar - 7 bar
Temperature: 10 °C - 50 °C

... robust valve designed for long life with improved sealing due to its large sealing surface. No heating of the fluid/ gas. Used for aggressive liquids or gases and single-use applications. Specifications Description Pneumatic ...

DN: 12 mm

... Modular and versatile pneumatic valve for manifold assembly. Agriculture Specifications Media Liquid, vapor ...

DN: 6, 8, 4 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C

... CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► Angled version FLOW CONTROL VALVES ...

DN: 7, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

... PRESSURE SAFETY VALVE ► For maintaining the position of a double-acting cylinder if the operating pressure drops ► The valve consists of 2 check valves that are unlocked pneumatically ...

DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C

... MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316 ...

Pressure: 16 Pa
Temperature: -10 °C - 180 °C

... Type - : Pneumatic Actuated Angle Seat, Piston Valve Connection - :Screwed G (BSP) , 1/2"...2" Function - : Normally Closed Working Temperature - :-10 … +180°C Max. Operating Pressure: 16 bar Recommended Control ...

Pressure: 25, 40 bar
Temperature: -20 °C - 180 °C

... Tork's T-PAV909 is a pneumatic actuated, stainless steel ball valve which has an actuator that is made up of hard anodized aluminum while its piston is made up of die cast aluminum. The indicator of the valve ...

Pressure: 7 bar
Temperature: -10 °C - 100 °C
Flow rate: 0 l/min - 250 l/min

... Overview
Proportional valves convert an analog electrical signal into a proportional pneumatic output, enabling fine control of flow and pressure. In medical air management, this ...

... strong>
AJL Vented Cap Grease Valve | Hard Seal High Pressure Grease Valve | Grease Injector Valve for Wellhead Equipment | Oil & Gas Grease Valve

Brief ...

DN: 12.7 mm - 25.4 mm
Pressure: 0 bar - 689.5 bar
Temperature: -50 °C - 200 °C

... hex head bleed valve; internal hex (hex socket) bleed valve.

Application Scope
Draining, venting and pressure relief for ball valves, gate valves, wellhead trees, blowout ...

DN: 4, 3, 2 mm
Pressure: 230 mbar - 8,000 mbar
Flow rate: 400 l/min - 3,750 l/min

... ATEX 3053 X is for Explosion Group “IIB3” tested with Ethylene and compatible for all gas with MESG > 0.65 mm for example: Ammonia, Industrial methane, Blas-furnace gas, Carbon monoxide, Propane, Butane, Pentane, Esane, ...

DN: 16 mm
Temperature: -200 °C - 860 °C

... Overview
Air inlet valve that allows air intake into the system. The knurled knob facilitates operation even when wearing gloves.

Available items:

• VIA16KF-4/FKM — Materials:

DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C

... • Materials -PVC-U, PP • Together EPDM, FPM • PN10 • Step of the ball in T or L • Hand lever or with pneumatic actuator or with electric motor 230V / 24V • Gluing, soldering or socket connections, with DIN / ANSI flange, threaded ...

DN: 10 mm - 100 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... • Pneumatic Actuator -OF -NC -NA • Robust pneumatic actuator, totally made of plastic • Includes visual indicator of open and closed position • Easy to replace the membrane, only remove 4 screws • Box with two ...

DN: 10 mm - 100 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... diaphragm valve has the highest closing forces in the GF Pipping Systems range of pneumatically operated diaphragm valves. It is available with FC (Fail Close), FO (Fail Open), DA (Double ...

Pressure: 0 bar - 16 bar

... best condensate solution! #Super Trap auto drain #zero air loss condensate drain #energy saving auto drain #auto drain for compressor, air tank and air dryer #auto drain for compressed ...