- Hydraulics - Pneumatics >
- Valve >
- Air and gas valve
Air and gas valves
DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C
The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the ...
Gascat
... Vent, is intended for use where both pressure and vacuum relief are required. The pallets in the vent housing allow intake of air and escape of vapors as the tank normally breathes in and out. Pallets open and close to ...
Gascat
... hazardous vapors to be piped away, rather than released into the atmosphere. The pallets in the vent housing allow intake of air and escape of vapors as the tank normally breathes in and out. Pallets open and close to ...
Gascat
DN: 10 mm
Pressure: 0.2 bar
Front control valve, inlet and outlet copper tube 10x1mm, for burning gas "Push-turn" ceramic headwork TECHNICAL FEATURES Media: Burning Gas Maximum pressure: 0.2 bar Fluid identification: ...
Pressure: 0.2 bar
Front control valve, inlet and outlet G1/4" female, for burning gas "Push-turn" ceramic headwork TECHNICAL FEATURES Media: Burning Gas Maximum pressure: 0.2 bar Fluid identification: ...
Front control valve, inlet and outlet G1/4" female, for oxygen Needle headwork with fine regulation Description: Oil and grease-free fitting, materials with media contact are Oxygen approved. Assembled fittings are ...
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
... mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded acc. to DIN-259.
ABV
DN: 0.25 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
... mount directly actuarors Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static system. Specifications •Tank bottom flange in AISI-316L.
ABV
DN: 0.375 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
... directly actuators Characteristics • General industry application, •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static system. Specifications Length: DIN 3202 m3. Ends: ...
ABV
Pressure: 400 bar
Choke valve is a kind of control valves, mostly used in oil and gas production wells to control the flow of well fluids being produced. Choke valves allow fluid flow ...
DN: 50 mm - 1,400 mm
Temperature: -46 °C - 150 °C
... barrier. 5) Low valve torque 6) Valve fire test has API, 6FA, API607 7) Blowout prevention valve stem, anti-blow out stem 8) Anti-static design G-type series full welded ...
DN: 100 mm
... standard for plug valves is normally associated with ANSI Standard B16.10. However, many manufacturers have elected to use face-to-face dimensions provided for gate valves so that plug valves ...
DN: 15 mm - 100 mm
... Reinforced PTFE, Usage and construction: L style three-way ball valve can be used for changing the direction of the flow, connecting the two way, T style three-way ball valve can be used for diffluence, ...
DN: 2 in
This valve has been designed for an efficient discharge of large air volumes from small water network systems, filters, containers and other devices where trapped air may impair the systems ...
DN: 1 in
This valve has been designed for an efficient discharge of large air volumes from small water network systems, filters, containers and other devices where trapped air may impair the systems ...
DN: 2 in
This valve has been designed for an efficient discharge of large air volumes from small water network systems, filters, containers and other devices where trapped air may impair the systems ...
Pressure: 6 bar - 10 bar
Temperature: 150, 130, 135, 121 °C
... two process lines is achieved via the CIP/SIP capable leakage chamber of the RIEGER-double seat valve N7 (also called double chamber valve. The CIP/SIP valves control the steam inlet ...
The Air Saver device, made up of a motorised ball valve and a programmable timer, installs at tank outlet and can be programmed to open automatically just before work begins and shut down right after ...
FINI
DN: 50 mm - 400 mm
Pressure: 16 bar - 40 bar
Temperature: 280 °C
balanced straight-way valve for medium and very high flow rates | useable for liquids, gases and steam | body made of GGG-40 or GS-C 25 | high precision thanks to integral control behaviour | response time can be adjusted by damping
DN: 15 mm - 150 mm
Pressure: 16 bar - 40 bar
Temperature: 250 °C
single-seat straight-way valve for high flow rates with balanced cone | highest temperatures up to 350 °C | usable for steam | body made of GS-C25 or CrNiMo-steel | steel / stainless steel, stainless-steel-diaphragm body, ...
DN: 15 mm - 50 mm
Pressure: 315 bar
Temperature: 500 °C
double-seat straight-way valve for high pressures and temperatures, small flow rates | usable for steam | body made of GS-C 25, C 22 N, 10 CrMo 9-10 | especially sturdy with long service intervals, long operational lifespan ...
DN: 15 mm - 50 mm
Pressure: 5, 0.5 bar
Temperature: -20 °C - 600 °C
... corrosion. Thanks to these features, Böhmer ball valves are among the few valves with API6D and API6DSS certification. For your application we deliver the ball valves with welding ...
Circulation control valve Tasks Circulation control valves regulate the flow rate during drum circulation on forced-flow steam generators. Versions Forged valves in straight, angled ...
Welland & Tuxhorn AG
Injection control valve Tasks Injection control valves are primarily flow control valves, which means they supply the required amount of cooling water to the point of use. The pressure ...
Welland & Tuxhorn AG
IP/LP bypass with secondary injection, type E20 The IP/LP bypass station connects the hot reheater in the bypass to the IP/LP turbine with the condenser. If the turbine is not in operation during start-up and shutdown, the steam generated ...
Welland & Tuxhorn AG
... cast iron, steel and AZ pipes DN 80 - 500 • For sluice-free tapping under pressure without auxiliary valve • for water up to PN 16 • optional for gas up to PN 5
DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C
Special features • - On/off valve with pneumatic piston actuator • - Cast iron body • - Easy to service and cost effective thanks to replaceable soft seal as well as safe relief of the actuator ...
SAMSON
DN: 0.5 in - 1 in
Pressure: 138 bar
... Drain Ball Valve has a spring return handle, and available in either stainless or carbon steel. The spring return “deadman” handle 76-500 and 89-500 series valves are handles that have a water, oil ...
Parker Refrigerating Specialties Division
DN: 1.5 mm - 5 mm
Temperature: -10 °C - 140 °C
Flow rate: 1.3 l/min - 6.5 l/min
Liquipure(R) valve series is a complete range of direct operated shut off valves for Healthy Beverage Dispense applications. The range provides Customers with an easy to mount flanged high performing ...
Parker Fluid and climate Controls Europe
DN: 4 mm - 10 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 80 °C
... Product Types: •3/2 Manual Switch-Operated Valve, Supply, Maie BSPP and Metric Thread •3/2 Manual Switch-Operated Valve, Control, Maie BSPP Thread •2/2 Manual Switch-Operated Valve, ...
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on carbon ...
Mival
DN: 6 mm - 16 mm
Ventilation elements Air valve, pneumatically activated Air Valve
DN: 0.25 in
Pressure: 630 bar
Temperature: -20 °C - 200 °C
Pressure: 15,000, 10,000 psi
Temperature: -18 °C - 204 °C
... style ball and stem that eliminates the possibility of ,,stem-turnout,, common with other valves designed for similar service. In addition, these specialty ball valves have re-torqueable seat glands that ...
Watts Fluid Air
DN: 100, 150, 125, 200, 160 mm
Description Valve for exhaust air. Designed for wall or ceiling mounting. Bayonet holders connect to socket VRGU, VRGL, or VRGM.
LINDAB
DN: 0.125 in - 0.5 in
Pressure: 35 psi - 130 psi
Temperature: 0 °F - 160 °F
Soft-start valves allow pneumatic components to be pressurized slowly for safety and control. MGV series soft-start valves are available with port sizes from 1/8" NPT to 1/2" NPT and ...
Temperature: -18 °C - 343 °C
The FL-HT gate valve is part of the F Series of valves, which have been supplied for production and drilling service since 1958. Many of the features of the FL-HT gate valve are common ...
CAMERON
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining