Air and gas valves

Pressure: 95, 90, 85 psi
Flow rate: 7 ft³/min - 15 ft³/min

ACV Air Control Valve The Clemco air control valve (ACV) allows the blast operator to control the volume of air to the Clemco high-pressure Type CE, ...

DN: 50 mm - 1,400 mm
Pressure: 25 bar
Temperature: -250 °C - 260 °C

... industry Liquefied natural gas process Pressure boosting Shipbuilding Pipelines and tank farms Process engineering Gas tanks Industrial recirculation systems Nuclear ...

DN: 0.75, 0.625 in
Pressure: 34.5, 31 bar
Temperature: -28, -18, -8 °C

... • Optional inlet strainer • Design working pressure for the LAC-4 valves is 500 psi (34.5 bar), LAC-5 and LAC-10 valves is 450 psi (31 bar). Applications: • Air Conditioning ...

DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C

... ®, CTFE Valve Stem 17-4 Stainless Steel Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series -Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA ...

DN: 0.5 in - 1 in
Pressure: 0 bar - 140 bar
Temperature: -40 °F - 240 °F

Parker Sporlan Type GC and FGB series gas cooler and flash gas cooler valves are stepper motor driven pressure regulating valves designed to maintain ...

DN: 19, 30 mm
Pressure: 30 mbar - 5,500 mbar
Temperature: -20, -30, 66 °C

The Type VS100 slam shut is constructed in such a way that it shuts off the gas flow to the downstream system when the outlet pressure goes above or declines below the predefined levels. Type VS100 slam shut has a ...

DN: 0.25 in
Pressure: 3 bar - 10 bar
Temperature: -10 °C - 50 °C

... of the valve reaches approximately 60% of the supply pressure. The ramp up time to reach the switch-over pressure is adjustable via the needle valve in the cover. Note: soft start valves ...

DN: 0 mm - 1,200 mm
Pressure: 0 bar - 830 bar
Temperature: -196 °C - 570 °C

... conditions in all market segments, such as: • Upstream gas re-injection, handling high pressure sour gas with API 6A Valve and Low Emission stem packing system, installed up to 830 ...

DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C

... Adaptable for various environmental conditions (installation in seawater environment, desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 60 °C

The BM5 Slam-Shut Valve is suitable for integration as a safety instrument in gas distribution piping and regulating stations. It is an auto shutoff equipment that is efficient in propane, butane, city ...

DN: 2 in - 10 in
Pressure: 8.6 bar - 13.8 bar
Temperature: 0 °C - 178 °C

... Class 125 cast iron flanged globe valve is recommended for service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other ...

DN: 15 mm - 50 mm
Pressure: 13, 25 bar
Temperature: 200 °C

... no tools. (Air to open) One combination I/P positioner/actuator (I/P positioned actuator) fits all size valves, to minimize spare inventory requirements. Integrated I/P positioner design simplifies ...

DN: 76, 92 mm
Pressure: 2.8 bar
Temperature: 125 °C

... engine will overspeed, leading to mechanical failure or explosion. The 4260 Air Intake Shut-off Valves effectively shuts down a runaway diesel by closing off engine intake air. Features ...

DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 450 °C

... . Read this instruction carefully before installation, and check valve type, size and technical parameters. 2. It is strictly forbidden to Weld flanges after installing valves. The valve ...

DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C

... powered mass flow meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C

... horizontal (in relation to shaft) Materials Case : brass (DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve shaft gasket ...

DN: 25 mm

... and closes when the coil is de-energized. A vent in the valve body relieves trapped gas when the valve closes. A pop-out indicator button informs you when the valve is ...

DN: 40 mm - 600 mm
Pressure: 10, 16 bar
Temperature: 50 °C

Resilient-seated gate valve with bolted cover connection and face-to-face length of Basic Series 14 for gas applications. Proven design with innovative improvements, such as plastic sliding ...

DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C

... analogue control. Compressed air for remote control necessary. The stroke is made proportional to the flow through the parabolic contour of the piston. The valve shuts tight and is of anti-water hammer ...

DN: 15 mm - 500 mm
Temperature: -29 °C - 500 °C

Metaltite® metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures Clean fluids, dirty fluids, high viscosity, scaling fluids, ...

DN: 40, 63, 16 mm
Pressure: 0 bar - 2 bar
Temperature: 0 °C - 300 °C

Isolation valve for UHV and extreme UHV applications, e. g. for pump isolation on pumping systems, intermediate pumping of gauge ports, gas handling in tritium systems, industrial applications, R&D, labs, etc.

... such as downstream valves and controllers, upstream valves and controllers, vacuum isolation valves and integrated solutions. MKS manufactures downstream pressure control subsystems ...

DN: 200 mm - 600 mm
Pressure: 16 bar

DN 200 - 600 PN 16 Body: ST52-3 Coating: outside Polyurethan, inside Epoxy Special design for gas distribution pipelines up to PN 16. Outside corrosion protection by coating with polyurethan. Suitable for underground ...

DN: 0.25 in - 2 in
Pressure: 300 psi

ROSS L-O-X® valves are energy isolation valves and are generally used as the first valve in a line supplying compressed air to equipment. Air ...

DN: 100 mm - 300 mm

Pipe regulator gates Press formed, fully seam welded and complete with lipped ends, manually operated pipe regulator gates are designed for use with granular product within an angled free fall pipeline Only for granular products ...