- Environment - Health - Safety >
- Air Treatment and Noise Management >
- Building fan
Building fans
Air flow: 37,000 m³/h
The technical details are the secret behind its perfection During smoke extraction, the RWM 57 conveys media up to 600 °C for 120 min Temperatures up to +80 °C are approved for permanent ventilation The air output is horizontal The ...
Nicotra Gebhardt
Air flow: 150 m³/h - 4,900 m³/h
Rotational speed: 1,400 rpm - 2,800 rpm
GEOVENT centrifugal fan LSFG and MSFG with forward curving impeller is used for extraction within the industry or for comfort ventilation, depending on the variant. The fan is made of 100% galvanized ...
Geovent
Air flow: 250 m³/h - 24,100 m³/h
Rotational speed: 1,400 rpm - 2,800 rpm
GEOVENT centrifugal fan LEX and MEX with closed backward curving B-wheel and directly driven flange motor. The fan is used for extraction within the industry or for comfort ventilation. The fan ...
Geovent
Air flow: 25 m³/h - 6,720 m³/h
Rotational speed: 920 rpm - 2,800 rpm
GEOVENT Plastic Fans type RPV, LPV and MPV is a serie of acid proof plastic, designed for for extraction of gases and fumes from highly corrosive processes. For instance lab fume hoods, battery rooms, washers and chemical ...
Geovent
Air flow: 900 m³/h - 37,700 m³/h
Diameter: 250 mm - 630 mm
Rotational speed: 1,500, 3,000 rpm
Medium-pressure radial fans with high capacities. Equipped with impellers that guarantee flows over a wide operating field. They convey large volumes of air at pressures higher than the “WPL” series. Also suitable for ...
Planetfan
Air flow: 4,800 m³/h - 99,500 m³/h
Diameter: 400 mm - 1,000 mm
Rotational speed: 955 rad.min-1 - 9,331 rad.min-1
Axial duct fans, medium pressure. Equipped on both sides with flanges for mounting them in general ventilation – duct systems. Provide high efficiencies at higher pressures than the standard “K” series. Suitable for ventilation ...
Planetfan
Air flow: 40,000, 25,400, 33,630, 22,700 m³/h
Diameter: 400, 1,850, 630, 800 mm
Rotational speed: 1,440, 1,460, 1,435 rad.min-1
Axial fans designed for free air discharge over long distances. Equipped with inlet cone and safety net on the inlet, outlet cone, feet fixed to the body. Suitable for outdoor use. Weatherproof. • Operating temperatures: ...
Planetfan
Air flow: 3,180 m³/h - 44,430 m³/h
Diameter: 470 mm - 1,340 mm
Rotational speed: 385 rpm - 1,460 rpm
... available in galvanized or stainless steel for maximum corrosion resistance. Ideal for use in farms, greenhouses and industrial buildings.
Air flow: 9,600 m³/h - 52,500 m³/h
Diameter: 638 mm - 1,385 mm
Rotational speed: 393 rpm - 942 rpm
... available in galvanized or stainless steel for maximum corrosion resistance. Ideal for use in farms, greenhouses and industrial buildings.
Air flow: 165, 2,500, 3,000, 3,500, 4,000 m³/h
Diameter: 160 mm
Noise level: 72, 70, 74, 75 dB
The mobile exhaust fan convinces by the very flexible application due to its low construction and the low weight. In connection to a suction hose, the exhaust fan is appropriate to the application to ...
Air flow: 13,600 m³/h - 72,400 m³/h
Diameter: 660 mm - 1,752 mm
Noise level: 65 dB - 74 dB
... closed environments Technical features of axial air extractors MTV G: - Very high air flow - 6-blade stainless steel fans - System for easy disassembly of the engine - Venturi mouthpiece in moplen - Patented ...
Air flow: 29.71, 35.65, 41.6, 47.54 m³/h
Diameter: 1.5, 2, 2.5, 3 m
Rotational speed: 70, 95, 130, 180 rpm
Leisure Life in Urban Area SUNON HVLS Fan has a lighter and stylish look. The airfoil combines aircraft-grade aluminum with a patented winglet design, it reduces the wind resistance and wind noise. Suitable for users ...
Sunon
Air flow: 120.92, 131.67, 81.64, 98.73 m³/h
Diameter: 4.2, 3, 3.6, 2.5 m
Rotational speed: 100, 150, 56, 70 rpm
... Energy-efficient Compared with the US BLDC Fan brand, it saves 45% of electricity. Ultra-Silent Patented winglet design, it reduces the wind noise and provides smooth airflow. Safer SUNON adopts an integrated fan ...
Sunon
Air flow: 574.07, 398.74, 282.74, 326.73, 381.7 m³/h
Diameter: 6.1, 7.3, 5.5, 5, 4 m
Rotational speed: 65, 115, 60, 50, 909 rpm
... Airflow Different from most large industrial ceiling fans on the market that rely on rapid turning speeds to generate unsteady and uneven airflows, Powerful HVLS Fan series 10 large industrial ceiling ...
Sunon
Air flow: 7,040 m³/h - 47,780 m³/h
Rotational speed: 945 rpm - 2,840 rpm
Noise level: 51 dB - 70 dB
... for installation in industrial buildings, stores or in any other type of building. Approved as a whole in accordance with standard EN 12101-3, with F400 and F300 certificate. Can be used for ambient ...
SODECA
Air flow: 6,100 m³/h - 118,400 m³/h
Rotational speed: 945 rpm - 2,910 rpm
Noise level: 48 dB - 77 dB
... people and prevents new sources of fire and greater structural damage to the building. Can also be used for ambient ventilation in the buildings in which it is installed. Fan: • An ...
SODECA
Air flow: 1,250 m³/h - 12,800 m³/h
Rotational speed: 905 rpm - 2,790 rpm
Noise level: 52 dB - 82 dB
Wall mounted axial fans with fiberglass reinforced plastic propeller. Fan: • Airflow direction from motor to impeller. • Fibreglass reinforced polyamide-6 impeller. • Steel sheet support frame. • ...
SODECA
Air flow: 975 m³/h - 57,825 m³/h
Diameter: 10 mm - 19 mm
Rotational speed: 735 rpm - 2,920 rpm
... industrial fan with forward-bladed impeller. For high flow rates of clean or slightly dusty air, fumes and vapors. Maximum air temperature: 60°C;with cooling fan 300°C. Special constructions on request. ...
CORAL
Air flow: 147.5 m³/h - 925 m³/h
Rotational speed: 2,760 rpm - 2,910 rpm
Centrifugal fan with forward curved blades or open blades for low flow rates and medium and high heads. Suitable for exhaust gas, flue gas and granular material suction. Direct-coupled execution only. Maximum air temperature: ...
CORAL
Ducted helical fan with nylon-glass impeller and alternatively cast aluminum impeller. Suitable for moving large volumes of air at low pressure even in the presence of dust or fumes. Maximum air temperature: 60°C. Special ...
CORAL
Air flow: 250 m³/h - 3,000 m³/h
The J series of exhaust fans is especially engineered for use in ATEX categorized zones. The fans are manufactured in diverse versions, each optimized for use in zones with dust-prone environs or dust ...
Air flow: 250 m³/h - 3,000 m³/h
Centrifugal exhaust-fans are intended particularly for source - capture and are completely adaptable to the EP Series arm line or with the EG and EK arm series by utilizing an adapter flange. These fans ...
Air flow: 21,000 m³/h - 39,800 m³/h
This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - Structure and overpressure ...
MET MANN
Air flow: 21,000, 39,800 m³/h
... air or vapors in industrial buildings, warehouses, farms, greenhouses, etc .. The extraction capacity is 21,000 and 39,800 m3 / h. The outer casing is made of galvanized steel and incorporates a premium propeller ...
MET MANN
Air flow: 7,200, 5,500, 3,600 m³/h
Ceiling fans with DT protection casing can be used to recover the stratified heat on the roof in winter, using the fan in winter allows us to save energy up to 30%. Its use can be commercial and / or ...
MET MANN
Air flow: 2,500 m³/h
Noise level: 72 dB
• The JustAir Fan Turbine is the ideal solution for getting exhaust fumes outside from difficult-to-reach places while saving on space. It wins people over thanks to its low headroom design and low weight. The fan ...
HD-V high-pressure fans The two automatic axes allow the system to cover large areas. The HD dust removal fan is a stationary unit that, guided by sensor or remote control, moves to any area as needed. Options ...
Air flow: 120 l/min
Diameter: 24 mm
Rotational speed: 26,000 rpm
Tube fan with high airflow, economic motor and integrated power electronic. Compared to a flat fan, the Micronel D-Line offers much higher pressure and still high volume flow at the same time. Typical ...
Micronel
Air flow: 313 l/min
Diameter: 30 mm
Rotational speed: 21,420 rpm
The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...
Micronel
Air flow: 492 l/min
Diameter: 34 mm
Rotational speed: 21,370 rpm
The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...
Micronel
Air flow: 100 m³/h - 450 m³/h
Rotational speed: 2,900, 1,450 rpm
Noise level: 45 dB - 67 dB
Produced completely by injection moulding.Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating ...
PLASTIFER
Air flow: 500 m³/h - 1,600 m³/h
Rotational speed: 1,450, 950, 2,900 rpm
Noise level: 57, 45, 70 dB
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating ...
PLASTIFER
Air flow: 720 m³/h - 2,000 m³/h
Extract Fan Low Pressure Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically ...
PLASTIFER
Air flow: 2,700, 3,850 m³/h
Portable extraction fan for welding fumes The portable FACILE extraction fan is particularly suited to protecting the operator from fumes and particulate when working in positions which cannot be reached ...
AERSERVICE EQUIPMENTS SRL
Air flow: 100 m³/h - 19,000 m³/h
Centrifugal fans with forward curved blades in galvanised sheet metal Extraction of air which is clean or with a low volume of particulates, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction ...
AERSERVICE EQUIPMENTS SRL
Centrifugal fan with forward curved blades in galvanised sheet metal Extraction of air with a low volumes of particulate, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction fan ...
AERSERVICE EQUIPMENTS SRL
Diameter: 1,530 mm
The NEW A fans are manufactures assembling variable pitch, wide-chord airfoil profile blades with a light aluminum alloy hub. The fans are the best choice for applications which demand high air-flows ...
HW Ventilation
Diameter: 300 mm - 1,250 mm
... ethylene, or gases and vapors of equivalent hazard Dust group IIIC - Atmospheres containing conductive dust Construction Fan Highly-efficient axial impeller, tested in HW Ventilation AMCA 210-designed wind tunnel Blades: ...
HW Ventilation
Diameter: 300 mm - 1,102 mm
F plastic fans are manufactured assembling variable pitch, slightly sickle profile blades with a light aluminum alloy hub. The fans are the best choice to suit a variety of applications which require ...
HW Ventilation
Air flow: 208 m³/h
Diameter: 60 mm
Rotational speed: 2,540 rpm
The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length ...
TECSYSTEM srl
Air flow: 240 m³/h
Diameter: 60 mm
Rotational speed: 2,350 rpm
The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length ...
TECSYSTEM srl
Air flow: 280 m³/h
Diameter: 60 mm
Rotational speed: 2,200 rpm
The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length ...
TECSYSTEM srl
Air flow: 11.32 l/min - 122,742.65 l/min
Diameter: 30 mm - 220 mm
These powerful, low-noise fans come with excellent energy efficient ratings and are particularly suitable for industrial applications and electronic components where high volumetric air flows are required. CTX offers ...
Air flow: 48 l/min - 1,019 l/min
DC fan blowers are typically used in projectors, humidifiers and household appliances. Supply voltage - 12 V, 24 V
Choose the right fan adapted to your installation and filters. Description An efficient filtering system needs to use the right fan adapted to your installation. Airflow, velocity, power, noise level ...
Air flow: 13,500 m³/h
Equalizes the temperature in buildings with high ceilings Ceiling fans are used primarily to equalize the temperature in rooms with high ceilings, such as industrial and warehouse buildings, ...
Air flow: 19,300 m³/h
... to adapt ceiling fan ICFX to almost all applications. Comfort Warm air is lighter than cold air and therefore rises towards the ceiling. In buildings with high ceilings, a cushion of warm air builds ...
Air flow: 216 m³/h - 9,400 m³/h
Coral
Coral
Air flow: 1,200 m³/h - 18,600 m³/h
Ducted helicoidal fan Centrifugal fan - backward inclined impeller, suitable for very dusty air, transport of granular materials, shavings as long as they are not filamentous. Centrifugal fan ...
Coral
Air flow: 100 m³/h - 13,000 m³/h
Metal sheet steel fan complete with inlet and outlet flanges
EXHAUST FILTER/fan module according to NFX 15-211 norm ( Filter not included )
Air flow: 3,000 m³/h - 28,000 m³/h
Diameter: 400 mm - 1,250 mm
Rotational speed: 270 rpm - 1,440 rpm
It is mainly composed of the impeller, motor, air duct and cover net. To be specific, the impeller is made of high-strength aluminum alloy sheet by molding. The motor is outdoor type with protection class IP 55 (or 56) and insulation ...
ERG Technology
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining