Building fans

Rotational speed: 2,800 rpm
Noise level: 10 dB

Don't give hearing damage a chance! The Sound Absorbing Fan (SAF) reduces noise by more than 10 dB, reducing the risk of hearing damage. The exhaust fans from the SAF series are equipped with sound insulation ...

Air flow: 3,000 m³/h - 22,000 m³/h

... frequency inverter The SIF is a central fan with an insulated case made for general filtration- and welding fume extraction systems The SIF ventilation fans are designed for use as central fans. ...

Air flow: 2,400 m³/h

... UltraFlex, Flex, T-Flex extraction arms FAN-28 is a wall-mounted extraction fan FAN-28 is especially designed to fit the large diameter (200mm) arms in our extraction arm program. ...

Air flow: 500 m³/h - 1,870 m³/h
Noise level: 52 dB - 63 dB

... radial fans on KryosROOF provide high flow rates and heads to ensure the correct airflow within the cabinet. In addition, there is a high efficiency version with EC fans and an active control probe, ...

Air flow: 0 m³/h - 1,000 m³/h

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due to the cast silumin ...

Air flow: 0 m³/h - 3,000 m³/h

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due to the cast silumin ...

Air flow: 2,000 m³/h - 4,000 m³/h

Central fans are the ideal solution when large amounts of air need to be moved. They are put to use in combination with duct on welding fume extraction tables, hoods and arms. Fans are used everywhere ...

BAF - Fans For Extraction Arm Bomaksan branded BAF model fans are specially designed to work with extraction arms. Bomaksan BAF series fans are preferred thanks to their high suction ...

Air flow: 1,000 m³/h - 35,000 m³/h

The Extractair® is a centrifugal fan that allows the evacuation of polluted air to the workstations. Installed on the roof and connected to piping networks, it is used to: - Cleaning and air renewal; - Cooling ...

Air flow: 1,000 m³/h - 35,000 m³/h

... of hot environments, - acceleration of drying and evaporation, - extraction of vapours and steams. The Nylair® fans are axial fans covering a wide flow range (1000 to 35000 m3/h). They of course, ...

Air flow: 5,800 m³/h - 7,200 m³/h

The Projectair® fan is a mobile helical fan. Wherever moving air improves working or production conditions, it can provide a solution adapted to: - Cleaning and air renewal; - Cooling of hot locations; - ...

Air flow: 1,250 m³/h

Practical benefits: Professional quality "made in Germany" - Original Trotec fabrication Extremely powerful radial blower- max. 1.050 Pa - optimal for ventilation over long hose distance Adjustable air flow up to max. ...

Air flow: 400 m³/h

... turbo fans are purposed to cater to the challenges that are daily put forward on them, but also proves that they are built for long service life. The TFV 10 S can perform at several angles such as 0°, 45°, 90°, which ...

Air flow: 10,000 m³/h

... 600 Ex the ideal conveying fan for ventilation in ex-proof zones of class 2, e.g. for tank cleaning, in docks, refineries, shafts or silos. Even with long hose distances of 50 metres with multiple arcs this powerful ...

Air flow: 0 m³/s - 23 m³/s

Filter Fan FPI size 1 (92 x 92 mm) for climatising control cabinets and enclosures. Configuration: FPI – airflow direction: IN (standard version: blowing). Optimal climatisation of your control cabinet: the Filter ...

Air flow: 0 m³/h - 23 m³/h

Filter Fan FPI size 1 (92 x 92 mm) for climatising control cabinets and enclosures. Configuration: FPI – airflow direction: IN (standard version: blowing). Optimal climatisation of your control cabinet: the Filter ...

Air flow: 0 m³/h - 32 m³/h

FPO 018 and FPO 118 – Filter Fan Plus FPO for climatising control cabinets and enclosures. Direction of air flow: OUT (sucking). Five standard sizes. Optimal filter fan for control cabinets: the Filter ...

Air flow: 0 m³/s - 198.218 m³/s

... EFFICIENCY WITH THE REVOLUTION HVLS FAN The Révolution® is Rite-Hite’s original Hiah Volume. Low Speed (HVLS) Fan and today’s standard for low cost, high-efficiency climate control, delivering the most ...

Designed for manual parcel loading and unloading CoolMan 2800 Trailer Fan swivels on unique bracketing to service two loading dock openings Easy vertical or horizontal adjustment using T-style handle for full access ...

Air flow: 15,000 m³/h
Rotational speed: 2,755 rpm - 2,950 rpm
Noise level: 70 dB - 94 dB

FUMEX FBE – an energy-efficient fan designed for industrial environments which can be installed both indoors and outdoors. For expelling non-explosive gases, fumes and lighter particles with an airflow of up to 15000 ...

Air flow: 6,600 m³/h
Rotational speed: 2,890 rpm - 2,940 rpm

FUMEX FTE is a range of radial fans for use at high concentrations of dust-laden air. Fan housings and impellers are made from heavy-duty steel sheet for industrial use. The welded impeller has straight ...

Air flow: 600 m³/h
Rotational speed: 2,800 rpm

Centrifugal fan for smaller applications FUMEX C 600 – a compact and sturdy fan which can be installed both indoors and outdoors, designed for industrial environments. The forward-curved impeller ...

NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the raw gas side, it blows into the filter system and is referred to as an overpressure ...

NESTRO transport fans transport the material to be filtered, e.g. in long pipelines or in the event of high volume flow requirements. They support/relieve the burden on the extraction fans.

NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the clean gas side, it sucks air through the filter system and is referred to as a vacuum ...

Air flow: 200 m³/h - 750 m³/h
Diameter: 108 mm - 200 mm

ECOFIT Single inlet centrifugal fans AC single phase motor Forward impeller galvanized steel or plastic, Impeller diameter of 108 up to 200mm, AC single phase capacitor external rotor motor 230V50/60Hz and 120V50/60Hz, Plastic, ...

Air flow: 400 m³/h - 1,100 m³/h
Diameter: 120 mm - 180 mm

ECOFIT Double inlet centrifugal fans AC single phase motor Forward impeller galvanized steel, Impeller diameter of 120 up to 180mm, AC single phase capacitor external rotor motor 230V50/60Hz and 120V50/60Hz, Black ...

Air flow: 310 m³/h - 2,700 m³/h
Diameter: 170 mm - 400 mm

ECOFIT axial fans AC single phase and three phase motor Plastic and black painted steel propeller, air direction “A” or “V”, Propeller diameter of 170 up to 400mm, AC single phase capacitor external rotor motor ...

Air flow: 50 m³/h - 500 m³/h

The KVA-KFA Series of enclosed fans is manufactured by Eurodifroid, can generate with air flow from 24 to 500 m3/h. This device is configured with extra slim design, and has fast installation with clips to generate more ...

Air flow: 24 m³/h

The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...

Air flow: 55 m³/h

The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...

Circulation Fans with Steel Blades & Galvanized Housing Our circulation fans provide uniform temperature throughout your tunnel, greenhouse or commercial warehouse. With our circulation fans ...

Air flow: 20,000, 30,000 m³/h
Diameter: 1,340 mm
Rotational speed: 750, 730 rpm

X-Fans are particularly addressed to cow barns and industrial plants and allow very high energy savings thanks to the low energy consumption. The system is the perfect choice to provide ventilation and to enlower heat ...

Air flow: 10,102 m³/h - 77,340 m³/h
Diameter: 26 in - 69 in
Noise level: 62 dB - 74 dB

... exhaust fans provide excellent ventilation for poultry laying cages. Refresh your barn’s air supply while removing respired moisture to provide a dry and draft-free environment for horses. Exhaust fans ...

Air flow: 1,200 m³/h - 1,200 m³/h
Rotational speed: 600 rpm - 1,300 rpm

DFB 16 Professional fans – battery powered This quiet running, battery powered fan is light and compact and can be used in public places like restaurants, bars, at events, workshops, as well as ...

Air flow: 2,200 m³/h - 19,200 m³/h

The highly durable Master mobile ventilators with high air flow are designed to support drying, heating and cooling equipment. It can be used in rooms to provide improved ventilation, air circulation and to dry moist areas. Available ...

Air flow: 2,600 m³/h

Master CD 5000 ventilator 2 600 m3/h Master portable ventilators support drying, heating and cooling equipment. Such devices can be used in rooms that need improved ventilation and air circulation, as well as help in drying moist areas. Available ...

... belt-driven centrifugal fans to operate outside the fire risk zone fitted with a backward curved impeller fitted with electric motors and a standardised set of pulleys, belts and guards in accordance with standard ISO-13857. Fan: • ...

Air flow: 7,040 m³/h - 47,780 m³/h
Rotational speed: 945 rpm - 2,840 rpm
Noise level: 51 dB - 70 dB

... for installation in industrial buildings, stores or in any other type of building. Approved as a whole in accordance with standard EN 12101-3, with F400 and F300 certificate. Can be used for ambient ...

Air flow: 6,100 m³/h - 115,950 m³/h
Rotational speed: 940 rpm - 2,910 rpm
Noise level: 48 dB - 78 dB

... for installation in industrial buildings, stores or in any other type of building. Approved as a whole in accordance with standard EN 12101-3, with F400 and F300 certificate. Can be used for ambient ...

Air flow: 4,987 m³/h - 237,000 m³/h
Diameter: 280 mm - 2,000 mm
Rotational speed: 750, 500, 1,500, 1,000, 3,000 rpm

Axial duct fans. Standard low-pressure fans popular in most duct ventilation systems. Planetfan produces the largest range of duct fans manufactured in Poland in terms of available diameters. • ...

Air flow: 9,000 m³/h - 81,300 m³/h
Diameter: 500 mm - 1,000 mm
Noise level: 77 dB - 102 dB

Axial fans, reversible (bi-directional), for continuous operation in high temperatures, up to + 105°C and high humidity. Specifically designed for use in drying chambers, especially in wood dryers and other drying processes ...

Air flow: 4,800 m³/h - 99,500 m³/h
Diameter: 400 mm - 1,000 mm
Rotational speed: 955 rad.min-1 - 9,331 rad.min-1

Axial duct fans, medium pressure. Equipped on both sides with flanges for mounting them in general ventilation – duct systems. Provide high efficiencies at higher pressures than the standard “K” series. Suitable for ventilation ...