Compact hydraulic pumps

Pressure: 0 Pa - 32,000,000 Pa
Flow rate: 95 l/min - 248 l/min
Speed: 2,400 rpm - 3,300 rpm

The LH30VO axial piston pump with a swashplate construction is designed for use in medium-pressure ranges. It is especially suited for use in mobile work machines, as well as stationary applications. Further, the pump ...

Pressure: 400 bar
Flow rate: 6 l/min - 195 l/min
Speed: 500 rpm - 3,000 rpm

... cmᶟ⁄rev. at a maximum pressure of 400 bar. It is a modern, compact pump which meets the market’s high demands on flow performance, pressure, efficiency and small installation dimensions. ...

Pressure: 170 bar - 210 bar
Speed: 2,400 rpm
Fluid viscosity: 1 m²/s - 2 m²/s

... equipment •Dump trucks, Tipping trucks& Dozers •Used in hydraulic log splitters •Fluid power transfer units (Power Packs) SALIENT FEATURES : •240 bar continuous operating pressure •Compact design •Good ...

Pressure: 0 Pa - 700 Pa

Two-speed hydraulic pump, Ideal for use with remote cutting and crimping tools Compact and lightweight - easy to move around jobsites Solid base with wide legs provides for good stability ...

Pressure: 301 bar - 400 bar
Flow rate: 79.9 l/min
Speed: 2,000 rpm - 3,000 rpm

... variable-displacement axial-piston pump designed to take on your most demanding applications. It offers high-pressure, superior performance in a compact design — while thriving on low-viscosity fluids. Product ...

Pressure: 420, 380 bar
Speed: 1,750 rpm - 3,150 rpm
Weight: 9.2 kg - 15.8 kg

Bent axis XPi pumps are specially designed to meet the needs of truck equipment. Their compact design allows a direct flange-mounting on the PTO. All models are of 7 piston design to ensure optimal flow ...

Pressure: 700, 500 bar
Weight: 7.7 kg - 15.4 kg

The LUKAS ZPH hand pumps are particularly robust and user-friendly two-stage pumps. They are particularly ergonomic due to their compact design and are intuitive to use. ...

Pressure: 700 bar
Flow rate: 0.14 l/min - 1.28 l/min
Weight: 6.3 kg - 13 kg

These mini-pumps are driven by an air-powered motor and can be connected to any supply source of compressed air. These compact low-cost pumps can operate all single-acting or double-acting ...

Pressure: 720 bar

Double-acting, single-stage air-powered compact pump. Standard with a 3/8” NPT female thread and compressed air connector. Excluding coupler, hoses and pressure gauge. Standard supplied with: Compressed ...

Pressure: 450 bar
Speed: 500 rpm - 4,150 rpm
Weight: 46 kg - 164 kg

... load-independent Design characteristics axial piston pump in swashplate design for high pressure closed loop systems exact and rugged servo control devices (mechanical, hydraulic, ...

Pressure: 280 bar
Speed: 1,900 rpm - 5,500 rpm

... Extremely low noise levels < 75 dB(A) Can be combined to make a double pump Can be used with almost all hydraulic fluids Can be used with fixed- and variable-speed drives Applications ...

Pressure: 10,000 psi

... connection with manual 4-way valve, start pump with remote control hand switch and extend connected tool. When hand switch is switched to off, pump stops ...

Pressure: 300 bar - 320 bar
Speed: 400 rpm - 4,000 rpm
Fluid temperature: -40 °C - 120 °C

... Application NEW DEVElOPMENT Pumps for mobile applications Electric-powered forklifts Diesel-powered forklifts Gas-powered forklifts 2Q-operation pump/hydro motor Decentralized high-efficiency ...

Pressure: 2,000 bar
Flow rate: 0.3 l/min - 2 l/min

Two stage piston pump, compact, robust and reliable. 1.1 kw electric motor, powerful, big flow. Safety and easy operating control line. When pressure under the set pressure ...

Pressure: 250 bar
Flow rate: 0 l/min - 70 l/min
Speed: 4,000, 600 rpm

Gear pumps made with aluminium alloy body and cast iron flanges and rear covers. Displacements from 0.27 to 1.62 cu.in/rev. Integral gear with 12 teeth. Available with flanges, shafts and ports for the main European, ...

Pressure: 4,495 psi
Weight: 121, 53 lb

... Variable Displacement pumps a set variable displacement piston pumps for use in closed center hydraulic systems. Pumps are available with either pressure compensation, ...

Pressure: 60 bar - 450 bar
Flow rate: 0.4 l/min - 7 l/min
Fluid temperature: -10 °C - 80 °C

... complex units. The pumps lift weights of up to 800 kg – quietly, steplessly and completely in sync. They are powered by an electric drive unit or hand crank. Our drive Systems Our ...

Pressure: 350, 280 bar
Flow rate: 110, 55.8, 173.5, 79, 159.9 l/min
Speed: 500 rpm - 3,960 rpm

- Medium pressure pump for hydraulic systems with open circuit - Displacement 18…71 cm - A wide range of control types - Possibility of tandem according to SAE Variable displacement pump ...

Pressure: 50 bar - 850 bar
Flow rate: 1.8 l/min - 18 l/min
Weight: 245, 170 kg

Hirado’s self developed hydraulic pumps are the interchangeable power sources for all Hirado foundry equipment. The pumps are fast, easy to maintan, mobile and do not overheat due ...

Pressure: 138 bar - 172 bar

... type vane pumps with a space saving design. These can be accessed in one or two pump models ideal for factory and mobile application. The structure of the vane is self-remunerated for erosion and demolition ...

Pressure: 0 bar - 460 bar

The Variable Displacement Pump with the highest pressure on the market From 40 cc/rot to 120cc/rot First of all, Variable displacement pump – VDP series from ABER is the right fit for the hydraulic ...

Pressure: 160, 200 bar

... ultrahigh pressure pump, Carter series shaped gear pump, chopping machine pump, PTO pump, spiral geared pump, bidirectional geared pump, ...

Pressure: 0 bar - 2,800 bar

... UHAP SERIES, ALUMINIUM, 2800 BAR General purpose air driven ultra high pressure hydraulic pump suitable for pumping water and oil up to 2800 bar • Portable, Compact • Single ...

Weight: 10 kg

1. Compact and light weight. 2. Quiet opeartion, even in high pressure range, with minimum vibration. 3. Aluminum casting body 4. Precision characteristics and prompt response. 5. Sturdy structure for high efficiency ...