Cooling fans

Air flow: max 31100.0 m³/h

... The Multifan Tramontana (130 cm) can be used wherever ventilation or cooling is required and is ideal for applications where smaller portable fans do not last. It can be used to extract dust, heat, smoke and many more ...

Air flow: 1,565, 880, 925 m³/h

... φ250 Axial Fan Motor YWF250 External Rotor Axial Fan R Series Class：φ250 Axial Fan Motor ...

Air flow: 13,000 m³/h

... APPLICATIONS: The fans of these series are suitable for sucking clean air and they are mainly used in ventilation and drying plants, for materials cooling, for the removal of welding smoke, in the plastic working machines, ...

... radiators and cooling towers. High temperature centrifugal fans are made with specific resistant materials or with cooling systems and therefore these fans guarantee operation in extreme ...

Air flow: 2,100 m³/h - 150,000 m³/h

... SPMD –SPMDR Industrial axial fan Conveyance casing in high-gauge sheet steel (Fe 37), fitted with double flange Impeller with blades adjustable from standstill state. Hub : SPMD in Aluminium SPMDR with steel sealing plates ...

Air flow: 350,000 ft³/min

... making this fan one of the most efficient centrifugal fans. This means: Less horsepower is required to produce the same performance as other fan models. Operational sound levels are lower. Energy costs ...

Air flow: 690, 405, 475, 780 m³/h
Noise level: 76, 73, 58, 62 dB

... • Sucks warm air out of the top of the cabinet • Optimal air conduction inside the cabinet • Low depth when mounted, low noise level • EMC versions are available • Painted housing made of sheet steel ...

Air flow: 2,400 ft³/min - 21,000 ft³/min

... Mancooler fans move high volumes of directed airflow at low velocity. The fan is available in direct- or belt-driven models and has galvanized steel construction. These fans work well in factories, warehouses ...

Air flow: 3 l/min

... SKOV 1250mm Industrial Misting Fan – exchanges a massive 35,000 cubic meters of air per hour and is ideal for large scale cooling or humidification applications • Includes a 2.5Lpm / 1000 PSI High Pressure Pump/Controller ...

Air flow: 0 m³/h - 31,908 m³/h
Diameter: 630 mm - 1,000 mm
Rotational speed: 0 rpm - 1,100 rpm

... simulation technology, reasonably designed flow runner combined with ultra-efficient motor create the high efficiency of the fan. [ Low Noise ] The designer closely combines aerodynamics and sound source, and makes the blade angle ...

Air flow: 6,107 m³/h - 33,356 m³/h
Diameter: 400 mm - 1,000 mm
Rotational speed: 935 rad.min-1 - 1,440 rad.min-1

... Axial fans for localised ventilation or stationary cooling. Built on a mobile frame with adjustable air discharge angle. Industrial design, for operation in production plants where workstations require continuous or periodic ...

... Radiators for engines from 15 kW to over 1000 kW. Combicooler. radiator-intercooler CAC - oil cooler ...

Air flow: 150 m³/h - 13,500 m³/h
Diameter: 125 mm - 400 mm

... The Colasit CMVpro® plastic radial fan sets new standards in efficiency of plastic fans and achieves a noticeable reduction in your operating cost, even compared to the best competitors. In addition to a total mechanical ...

Air flow: 0.679, 0.602, 0.523, 0.411 m³/s
Diameter: 350 mm
Rotational speed: 1,360 rpm

... Plate Mounted Axial Flow Fan • Standard size 350mm • Air volume flow rates up to 0.679 m3/s • Static pressures up to 95 Pa • Highly efficient, lightweight induction motors • Fully speed controllable • Suitable for operating temperatures ...

Air flow: 3,600 m³/h - 37,000 m³/h

... The ASF21 is a light, portable and electronically powered cooling fan which helps to instil a comfortable working environment by circulating clean, fresh air. The unit will disperse large amounts of air quickly and quietly, ...

... The AFDB, Axial Fan is typically used for the purpose of industrial ventilation, cooling and exhausting etc. It has a shorter and longer stainless steel and carbon steel material case. It can be fitted with stainless ...

Air flow: 3,700 ft³/min - 12,750 ft³/min
Diameter: 22, 16, 30 in
Rotational speed: 1,150, 1,725 rpm

... Powder coated for durability Wall Mount Fans are ideal for warehouse cooling, on pick-lines and for pushing air outdoors. Size - 16" Fan, 22" Fan, 30" Fan HP ...

Air flow: 92, 250 m³/h
Rotational speed: 2,189, 2,500 rpm
Noise level: 40, 32 dB

... • Application area up to approx. 30 m² per fan. • Versatile expandability of the system: Connection of a supply air fan (e.g. ECA 11 E) is possible to increase the air exchange. • Fully automatic, intelligent cellar ...

Air flow: 13,000 m³/h - 15,000 m³/h
Diameter: 230 mm
Rotational speed: 300 rpm

... and 300 revolutions per minute, our ceiling fans ensure quickly and evenly heated areas without long preheating times. Special blades ensure a narrow air cone, thus avoiding flat draughts. Our ceiling fans are also suitable ...

Rotational speed: 2,540 rpm - 2,650 rpm

... Impeller material: - alkyd coated steel, stamped Direction of rotation: - clockwise for blowing "B" and counter-clockwise for sucking "S", seen on rotor Type of protection: - IP44 Insulation class: - B Mode of operation: - continuous operation (S1) Bearing: ...

Diameter: 360 mm - 800 mm

... Comet Fans are the basis of the design of the “AFH” series fans. An ideal choice when looking for a high performance product of superior quality. Only the best materials and components are selected for the production ...

Diameter: 300 mm - 1,250 mm

... ethylene, or gases and vapors of equivalent hazard Dust group IIIC - Atmospheres containing conductive dust Construction Fan Highly-efficient axial impeller, tested in HW Ventilation AMCA 210-designed wind tunnel Blades: AISI ...

Air flow: 355 m³/h
Noise level: 62 dB

... Upgrade your loading dock with the durable and efficient loading dock fans from Brite Lite. These powerful and efficient systems are designed to provide cooling and ventilation in industrial environments, where workers ...

Air flow: 2,000 m³/h - 24,000 m³/h

... A range of extremely strong fans which produce a high airfl ow to the area being treated. Applications: For general and commercial use. Suitable for machinery cooling, drying purposes, dispersion of dust and smoke and ...

Air flow: 3 m³/min - 70 m³/min
Diameter: 50 mm - 200 mm
Noise level: 50 dB - 90 dB

... The Sirocco Blower is a futural device. Designed by Chuan- Fan Electric Co. Ltd. it is utilized for over, plastic and printing industries ventilation as well as for drying and cooling purpose machinery ventilation. It ...

Air flow: 1,993 m³/h - 46,141 m³/h

... Specification:3.55#~10# Power:0.09~7.5KW Flow rate:1993~46141m³/h ...

Air flow: 2,580 m³/min - 13,000 m³/min

... HDS series intelligent ceiling fans are a series of products specially developed for energy saving and consumption reduction and improvement of working environment comfort. The intelligent ceiling fan is driven by self-designed ...

Air flow: 1,722 m³/h

... is easy to control. An axial fan, in general, is the most commonly used as cooling fan, as well as the most cost effective. Also called “box fan” on occasion, they move air on a straight ...

... Howden SX fan's acoustic output is up to 20 dB(A) lower than comparable conventional cooling fans and in many cases eliminates the need for expensive and bulky sound attenuation equipment. The blades ...

... solution. After years of testing and reiterations, we birthed the Vyper Turbo Fan. The Vyper Turbo Fan utilizes patented brushless DC drive technology that allows the fan to run extremely quiet while ...

Air flow: 0.8 m³/s
Diameter: 300 mm

... Mining Tunnelling Drilling / Blasting TBM / Roadheader Duct fans / Special ventilation fans Deduster / Filter Heating / Cooling units Special machinery The fan is generally ...

Air flow: 330 m³/h - 8,400 m³/h

... temperature allowed 80°C or 150°C if a cooling fan is installed Belt Drive trasmission: Maximum fluid temperature allowed 90°C or 350°C if a cooling fan is installed In case of higher ...

... Small Mist Air cooler Name:26"centrifugal mist fan Small Mist Air cooler,HW-26MC03-A Voltage:220v Frequency:50/60HZ Speed:3 Motor:100% copper,tiger motor Blade:aluminium ...

Air flow: 5.5, 6 m³/min

... Frame: - Steel with black painting Impeller: - Plastic & Aluminum Bearing System: - Ball bearing or sleeve bearing Motor: - Capacitor start-run or Shaded pole Protection: - Impedance-Protected or Thermally-Protected Insulation Resistance: - Above ...

Air flow: 0 ft³/min - 330,000 ft³/min

... applications where clean to lightly loaded air is present. Applications include primary air supply; product cooling; combustion air; drying; glass blowing and cooling; gas boosting; and pneumatic conveying. Sizes 18 ...

Air flow: 500 m³/h - 965 m³/h

... The new generation of roof-mounted fans is one system for all sizes: only one mounting cut-out is needed for all output categories. Air routing with minimal pressure losses ensures a high level of efficiency, while an innovative clamping ...

Diameter: 762 mm
Rotational speed: 990 rpm - 1,135 rpm
Noise level: 68 dB

... Product Overview

• High-powered 30" 10,108 CFM drum fan for cooling, drying and ventilation in industrial applications.
• Three-speed motor control with 4- and 8-hour preset timers plus infinite

... they ensure maximum cooling performance with minimal noise, power consumption, and weight. 1. What is an Engine Cooling Fan Module (CFM)? An Engine Cooling Fan ...

Air flow: 6,200 m³/h

... The axial air stream fan AIR 1 is designed to cool power units and special sections of the vehicle. Its four swivelling, rubber-tired fixed castors provide flexible and uncomplicated steering. Easily manoeuvrable with 4 rubber-tyred ...