Double-turret lathe

Spindle speed: 5,000 rpm
Maximum cutting diameter: 218 mm
Maximum cutting length: 409, 435 mm

... Either turret is capable of working on either spindle, independently or simultaneously, without limitations for maximum part processing flexibility to reduce cycle times. In addition, if required, either the second spindle ...

Diameter: 110 mm
Spindle speed: 7,000, 8,000 rpm
Maximum part length: 400 mm

... Optionally Siemens 840D sl or Fanuc 31i-B. iXpanel: The operating system for direct communication of the production turning machine INDEX C100 with your business organization. iXpanel consists of an 18.5” multi-touch ...

Maximum cutting diameter: 650 mm
Maximum cutting length: 59 in
Nominal power: 20, 15 kW

... equipped with a full-contouring C-axis, and the optional lower turret provides additional capability for increased throughput and process balance. Familiar programming methods from both lathe and machining ...

Diameter: 230, 175, 300, 390 mm
Spindle speed: 3,500, 6,000, 5,000 rpm
Maximum part length: 120, 230, 350 mm

The PUMA TT is a horizontal turning center designed and built for the fast and mass production of high precision automotive or medical parts. Featuring live tooling, a Y-axis and a built-in sub-spindle TT machines deliver ...

Diameter: 34, 42 mm
Spindle speed: 50 rpm - 6,000 rpm
Axe X: 140 mm

Simultaneous left/right processing with a main turret and compact sub-turret and overlap processing with double turning tools sharply cut the machining time A half-indexing mechanism ...

Diameter: 100 mm
Maximum part length: 50 mm
Bar capacity: 50 mm

Process integration Integrated machining in the smallest floor space Proven experience in diverse machining, from round to irregular workpieces Thermal displacement of 5.0 μm in a Cold Start Stable machining accuracy thanks to ...

Diameter: 320 mm
Spindle speed: 5,000 rpm
Bar capacity: 52 mm

Continuous / simultaneous machining by both spindles thanks to automatic workpiece transfer from one spindle to the other The DUAL TURN 200 is comparable to two turning centers,with floor space reduced by approximately 30% Various Automation/Unmanned ...

Diameter: 500 mm
Spindle speed: 50 rpm - 800 rpm
Maximum cutting diameter: 420 mm

... purpose machine designed for flange producing sector. It is controlled by GSK 980TTC controller and features double spindles, double turrets and independent two channels for different ...

Diameter: 250 mm
Part diameter: 200 mm
Maximum part length: 630 mm

... shaft production. The VTC 200 vertical turning center is designed for the most productive manufacturing of shafts with a length of up to 630 mm and a diameter up to 200 mm. The turning center has ...

Diameter: 230 mm
Spindle speed: 3,500, 4,500, 5,000 rpm
Maximum part length: 230 mm

... Due to twin spindle, twin mill-turret, twin Y-axis, the same left spindle milling & Y-axis machining is possible for the rear side of the work piece on the right spindle. Mill Turret The upper and ...

Diameter: 175, 200 mm
Spindle speed: 5,000, 6,000, 4,500, 8,000 rpm
Maximum cutting length: 588, 570 mm

... faster cycle times. High-Performance Milling Capabilities Milling motor power 7.1/2.2kW (op. 5.5/2.2kW only for 12-st turret) Max. speed 6,000 min-1 (op. 8,000min-1)

Diameter: 310 mm
Spindle speed: 4,000 rpm
Maximum cutting diameter: 310 mm

Equipped with twin turrets and twin spindles, the MX-800 is a multi-tasking fully intelligent turning - milling CNC lathe for complex machining Built-in spindle Linear Guideway

Diameter: 858 mm
Spindle speed: 50 rpm - 2,000 rpm
Nominal power: 40 ch

... and holds the part in place. No more workppiece warpage caused by hard clamping. -Avallable with gang type, single turret or double turret tooling configuration for mixed volume production. -It ...

Diameter: 0 mm - 560 mm
Spindle speed: 31 rpm - 4,000 rpm

The Monforts DNC 500 DuoTurn with two tool turrets and two spindles is a successful integration of two high-performance lathes into a single compact machine concept: The right and left sides of the workpiece ...

Diameter: 165 mm
Spindle speed: 50 rpm - 4,500 rpm

The LCXT machines are equipped with twin spindles and twin turrets to ensure increased productivity and accuracy while reducing cycle time within a compact footprint. This machine is also available with a gantry loader ...

Diameter: 230, 300 mm
Spindle speed: 6,000 rpm
Maximum part length: 260 mm - 680 mm

Spindle bore: 56 / 61 / 77 / 90 mm Hydraulic chuck: 6" / 8" / 10" / 12" E axis travel: 260~520 mm Y axis travel: ±40~50 mm

Diameter: 540 mm
Spindle speed: 3,000, 2,000, 2,800 rpm
Axe X: 295 mm

Compact but rigid and versatile. High performance cutting capabilities in turning, milling and even both together in one single set-up. •Compact design with rigid box ways for utmost stability and cutting performance. •Slant bed design ...

Diameter: 200 mm
Spindle speed: 5,000 rpm
Maximum part length: 350 mm

This range of double-spindle and double-turret turning centres for bar machining is available in the T2 and T3 configurations featuring two or three turrets with bar ...

Diameter: 230, 390, 175 mm
Spindle speed: 6,000, 5,000, 3,500 rpm
Maximum cutting length: 350, 230, 120 mm

... right spindle and a lower turret! The left and right spindles and the upper and lower turrets are able to operate independently to double productivity. Various sizes from Ф42mm~Ф81mm ...

Diameter: 1,200, 1,000 mm
Overall lenght: 3,000, 4,000 mm
Weight: 5,000 kg

... Measuring reports · Key parameters communication between machines · Automatic loading / unloading systems for all type of lathes