DN: 1.5 in - 5 in
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 80 °C
... The asa butterfly flange with SAE and DIN connections allows the combination with an elastic element (rubber compensator) to make a short compensating and economical connection with the pump port. ...
... DeZURIK Knife Gate Valves are specifically designed for tough abrasive and/or corrosive services. To prolong valve life in especially demanding services, Deflection Cones can be used to protect valve ...
DN: 40 mm - 80 mm
Pressure: 10 bar - 40 bar
Temperature: 70 °C
... three functions air valves has been adopted on the AUTOMATIC AIR VALVE, for an easy, safe and long service life. Nominal Diameter (DN): 1’’ Male / DN40 up to DN80 Working pressure (acc. to DN): 16 bar, 25 bar or ...
Belgicast
DN: 2, 1 in
Pressure: 8 bar
... The valve CELTIC-N is a new model developed by Gascat Engineering to use in blanketing systems. Blanketing systems is a process of using an inert gas such as nitrogen or carbon dioxide, in storage tanks to maintain a positive pressure ...
Pressure: 17.2 bar
... can independently activate an actuator to open the deluge valve: a pneumatic Dry Pilot detection Line and/or an electric solenoid, connected to sensorst hrough a control panel. Once open, the valve reduces the inlet ...
DN: 100 mm - 1,200 mm
Temperature: -100 °C - 550 °C
... flawless bubble tight shutoff. For flanged end valve, the shaft is positioned at the flange side which reduced the possibility of external leakage caused by the ambient temperature changed. Specifications: VALVE ...
Value Valves Co., Ltd.
DN: 6.426, 50, 0.5 mm
Pressure: 0 MPa - 1 MPa
... two ball valve, its characteristic is safe sampling and steady. During the sampling progress, first of all, close the A valve which is near the equipment(or piping system), then open B valve, to let the ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 0.5 in - 3 in
Pressure: 1,000, 800 psi
... AISI-316 (ASTM-A351-CF8M/ EN10213 1.4408) Full port, Clamp/ Weld end, 1/2"~2" 1000PSI/ PN63, 2.1/2"~3" 800PSI/ PN40, Blow-out proof stem, Cavity filled seats, ID polished <=0.3μm & OD polished <=0.4μm Drain hole (Piggy hole) design, Butt Weld end cap ...
DN: 15 mm - 600 mm
Temperature: -50 °C - 600 °C
... Russian Standard GOST Gate Valve Z44 (30с41нж, 30с64нж, 30с15нж,30с76нж,30с45нж) Technical Specifications： (1) Design Standard: GOST 5762-2002 (2) Face to Face Dimension: GOST 3706-93 (3) End Flange Dimension: GOST ...
DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C
... according to EN 558, basic series 14 (DIN 3202, F4) flange end connections EN1092-2, ISO2531 pressure class: PN16 test according: EN1074-2 working temperature: up to +70°C drilling of flanges: PN10/16, starting ...
BLUCAST
DN: 3 in
... The OPW 6500 series angle loading valve, made in cast aluminum, allows fluid to be held in the line out to the end of the loading arm. The aluminum body is constructed with stainless steel trim for a range of fluid handling capabilities. ...
DN: 100 mm
Temperature: 80 °C
... closure. Whether upstream, downstream or main process: A comparison with classic methods shows that this split butterfly valve technology can make your process safer. because AVAX is made entirely of pharmaceutical-compliant plastics. ...
DN: 50 mm - 300 mm
Pressure: 10 bar
... Replaceable top packing gland enables sealing replacement without disassembly of the valve The valve is self-cleaning when opening the valve, an additional scraper is available for extra protection of ...
DN: 15 mm - 100 mm
Temperature: -40 °C - 120 °C
... bottom stand with an insert hole, DIAPHRAGM VALVE TYPE 14 helps support the piping. The valve is also provided with a flange stand to increase installation safety. Built-in Travel Stop(15-50mm) DIAPHRAGM ...
DN: 15 mm - 300 mm
Pressure: 16 bar - 100 bar
... Stem multi-stage sealing, valve seat elastic sealing design Safe and reliable Valve stem blowout prevention, fireproof, explosion-proof, anti-static and other functions design The torque is light and stable The ...
DN: 15 mm - 150 mm
Pressure: 25 bar
Temperature: 2 °C - 200 °C
... The Honeywell two way control globe valve V5025A is a complete series of single-seated and pressure balanced valves PN 25. They are suitable for heating, ventilation and air conditioning systems (HVAC). The sizes DN15 ...
A.Hock MSR u. Electronic Service GmbH
Pressure: -1 bar - 9 bar
Temperature: 0 °C - 150 °C
... Non-Intrusive Plug Valve Sampler • The plug is flush with the vessel wall when retracted. • Extracts a representative sample from the side of a vessel/dryer. • Can sample under vacuum or over-pressure • Sample Plug retracts to open ...
DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C
... Disc features a rated breaking-point outside the atmospheric seal • Wide, chambered flange face • Hysteresis free throttling characteristic • ISO mounting flange for direct automation ...
Swissfluid AG
DN: 65 mm - 150 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 55 °C
... system ball valve, solid version space-saving wafer flange version with high-quality stainless steel bushes modular upgrading of connection possible up to flange version in DIN face-to-face dimension excellent ...
DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C
... Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet / Outlet: Copper ...
Carlos Arboles S.A.
Pressure: 500, 700 bar
Flow rate: 60 l/min
... Control valves Pressure valves Flow control valves Stop valves ...
DN: 15 mm - 200 mm
Pressure: 10, 16, 25, 40 bar
... Pneumatic On Off Ceramic Ball Valves DN25-DN200 With ISO 9001 Pneumatic Air Control Valve type: Full Lined V-Port Ceramic ball Valves Trim Material: ZrO2, 99% Al2O3,99.7%Al2O3,SSIC, STC, Si3N4 End ...
... complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Bolted flange as body-cover for ball Flanges drilled acc.to UNI or DIN Possibility of equipment with handlever, ...
THERMOMESS S.r.l.
DN: 2 in - 20 in
Pressure: 16 bar - 160 bar
... B16.10 Flange Ends: ASME B16.5 Inspection Test: API598,EN12266, ISO 5208 Certificate:EN 10204 type 3.1 Markings: MSS SP 25 Related product Tag: High Pressure Globe Valve Power Station Globe Valve Pressure ...
DN: 25 mm - 800 mm
Pressure: 500,000 Pa - 700,000 Pa
Temperature: -40 °C - 450 °C
... Structure: Centre Sealing Seal Form: Auto Sealed/Force Sealed Material of Seal Surface: Soft Sealed Valve Body: Injection Trademark: Baodi Transport Package: Carton/Plywood Box ...
DN: 50 mm - 500 mm
Pressure: 10, 6 bar
Temperature: 180 °C
... One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For ...
DN: 200 mm - 800 mm
Pressure: 10 bar
Temperature: 80 °C
... Shock pressure resistant and flameproof intermediate flange slide gate with low overall height. MATERIAL HOUSING :Cast ironMATERIAL SLIDING PLATE :Stainless steelSEALING :Circumferential packing aramid, o-ring viton Adjustable packing ...
Jaudt Dosiertechnik Maschinenfabrik GmbH
DN: 38.1, 25.4, 12.7 mm
Pressure: 4, 7 bar
Temperature: 135, 140 °C
... The Pharmavalve is a radial diaphragm valve, manually or pneumatically operated, specially designed for critical processes where any contamination, dead leg zones or leakage are to be avoided. Thus, the valve is suitable ...
DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C
... • wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 ...
... Western Union, MoneyGram Supply Ability: - 10000PCS/Mouth J41 J941russian standard cast steel globe valve and motorized globe valve price Structural Features: · Straigh pattern body design · OS&Y, ...
Zhejiang Jieyu Valve Company
Temperature: 0 °C - 600 °C
... The Vatac High Performance valves are available in Soft Seat (Up to 200°C depending on size and pressure), and Metal Seat (Up to 600°C) variants (fire safe on application). Vatac Flange High Performance Butterfly ...
Vatac Valves (Wenzhou) Corporation
DN: 0.5 in - 30 in
... for you! Types Ball Valves -Full Bore & Reduced Bore, Cast & Forged Steel, Side & Top Entry Butterfly Valves – Soft Seated & Metal Seated High Performance Gate Valves – Standard – Cryogenic – ...
Pressure: 140 bar
... sériés of globe valves are mainly composed of valve body, valve core, adjusting rod, handwheel, etc. The valve body is made of steel forging, with nickel plating on the surface and excellent ...
Jiangsu Deenpu Petrochemical Machinery Co.,Ltd
DN: 50 mm - 600 mm
Pressure: 1 MPa
... Motorized High Vacuum Butterfly Valve used for Chip Production Industry Electric Butterfly Valve Application DCL electric motorized high vacuum butterfly valves are widely used on crystal growth ...
Pressure: 4 bar - 10 bar
Temperature: 130, 150 °C
... The Hygienic Mix Proof Tank Outlet Valve N5 is the Tank Bottom Seat version of our Mix Proof Valves. It is available with one or two ports as well as with a lose or a machined weld-in flange. For horizontal ...
DN: 80 mm - 500 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 225 °C
... dimensions acc. to EN 558, GR.1 and EN 558, GR.27 FTF dimensions acc. to ANSI B 16.10 flanges acc. to EN 1092 flanges acc. to ANSI B 16.5 top flange DIN EN ISO 5211 full bore The ...
KLINGER-SCHÖNEBERG GmbH
DN: 4 in - 24 in
Pressure: 250 psi
... tapping valves for sizes 4"-48", rated at 250 psig working pressure. The Series 2500 tapping valve is furnished in a flange x mechanical joint configuration and includes all of the standard features ...
DN: 40 mm - 80 mm
Pressure: 16 bar
Temperature: 130 °C
... immediately results in a changed flow volume. NV 98 is a float valve for horizontal installation inside a tank as inlet valve with outlet at the bottom. This valve is made entirely of stainless steel ...
DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C
... resistant control valve, the valve body and the inner part of the whole lining of fluorine structure, effectively blocking the corrosion of the valve in the medium of corrosion of metal materials. The ...
SuZhou KoSa Environmental Protection CO.,LTD
DN: 20 mm - 200 mm
Pressure: 16, 40, 64 bar
... Body: WCB, WCC, WC6, SS304, SS316 Bonnet: WCB, WCC, WC6, SS304, SS316 Seat: SS304, SS316, SS316L End Connection: Flanged, RF, MF, RTJ Welding: Socketweld, Buttweld Packing: PTFE, Graphite Gasket: Metal Graphite Actuation Type: Spring ...
Valvesonly Europe
the best suppliers