Full-flow valves

DN: 0.5 in - 2 in
Pressure: 25, 16 bar
Temperature: -5 °C - 90 °C

... temporarily dunng 1 hour max ) • - Max Pressure Ps ( excepted drain valves types ) : 40 bars up to DN 3/4*, 25 bars from 1“ to 1*1/4.16 bars over • - Max pressure Ps for drain valves types : 25 bars ...

Pressure: 150 bar

... High-Speed Isolation Valve provides a solution for vital explosion isolation applications. It operates in milliseconds to provide a mechanical barrier within a pipeline. The High-Speed Isolation Valve ...

DN: 20, 15 mm
Pressure: 16 bar
Temperature: -20 °C - 90 °C

Built-in valve, F/F threaded, with stop cock, with protection cover.

DN: 15 mm - 100 mm
Pressure: 6, 10 bar
Temperature: -40 °C - 60 °C

Full flow design， PN10， Suitable for PPG and PPH materials Compact structure, light installation, high-cost performance. Please close the valve before installation. Using a rubber ...

DN: 8 mm - 200 mm
Pressure: 0 bar - 100 bar
Temperature: -50 °C - 305 °C

V16 Gachot® Three piece Ball Valve with unique design for easy and quick installation and maintenance. General applications General industry, Chemical and petrochemical industry, Shipbuilding, etc. Technical data Leakage ...

DN: 25 mm
Pressure: 40 bar
Temperature: -20 °C - 180 °C

Gas ball valve stainless steel DN25 - 1" inch full port design seal made of PTFE / Viton for gas DVGW-Gas Seal steam: - PTFE / Viton length: - 82mm actuator: - lever handle made of stainless steel ...

DN: 8 mm - 100 mm
Pressure: 25, 64, 16, 30 bar
Temperature: -20 °C - 160 °C

Full bore ball valve, F/F threaded, with aluminum handle.

DN: 8 mm - 150 mm
Pressure: 16 bar - 64 bar
Temperature: -196 °C - 300 °C

... Port Full bore ,Reduced bore,two way,three way,mulity port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof stem Seat Sealing Integral ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 ...

DN: 50, 20, 25, 40 mm
Pressure: 15 bar
Temperature: -20 °C - 80 °C

... outside, fittings are made of robust cast aluminium, painted in grey, with durable Nitrile gasket seals, pipe, fittings, and valves are available silicone-free.

DN: 8.5 mm - 80 mm
Pressure: 40, 63 bar
Temperature: -20 °C - 180 °C

BSP Female Thread: DIN / ISO 228 Two-piece - AISI 316 Full-Port Sealings: Ball + Stem = PTFE (-20°C to +180°C) At higher temperatures please note the pressure / temperature diagram.

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. ...

DN: 6 mm - 50 mm
Pressure: 40, 65 bar

* Ball valve made of brass * Full port design * Female threaded acc. to ISO 7/1 * Length acc. to DIN 3202-M3 * Free of silicone * Blow-out proof stem with double O-ring sealing ...

DN: 0.25 in - 4 in
Pressure: 40, 32, 25 bar
Temperature: -10 °C - 120 °C

• Full bore • Body, ball and socket hot stamped chrome plated brass OT58 • PTFE seats - O ring EPDM • Handle and nut chrome plated steel • Double o-ring stem anti leakage technology • Chrome plated stem with nut • ...

DN: 15 mm - 100 mm
Temperature: -20 °C - 300 °C

... Automation 6) Pressure Blance Hole in Ball Slot 7) Full Bore Model NO.: Q41F Connection Form: Flange Nominal Pressure: 150lb to 2500lb Structure: Floating Ball Valve Function: Blow-Down ...

DN: 1.5 in
Pressure: 16 bar
Temperature: -40 °C - 250 °C

The Perolo ND40 ATCO FULL BORE self-contained ball valve is designed to be used as an air inlet or as a fluid inlet/outlet valve. With its MAWP of 16 bars, this valve ...

Pressure: 0 bar - 40 bar
Temperature: -20 °C - 120 °C

Ball valves - 100 series Areas of application : compressed air, oil, water Technical features - nickel plated brass body - chrome plated brass ball - ball sealings : PTFE - aluminium handle - oil-proof rubber ...

DN: 200 mm
Pressure: 25 bar
Temperature: 200 °C

... efficiency and accuracy. KOSA software control valve selection, a code generation control valve comprehensive performance parameters, such as control valves, control valve ...

DN: 0.5 in - 36 in

... side-entry ball valve is the most common and popular design. Given its great modularity, SRi can manufacture any side-entry ball valves with special options. In case of maintenance operation, all ...

DN: 15 mm - 400 mm
Pressure: 16, 25, 40 bar
Temperature: -60 °C - 200 °C

Material specification Body: carbon steel (steel 20), alloy steel (09G2S) or stainless steel (AISI 321H) Stem: stainless steel (AISI 420) Ball: stainless steel DN 15 – 32: AISI 420; DN 40 – 65: AISI 304; DN 80 – ...

DN: 50 mm - 250 mm
Pressure: 10 bar
Temperature: 150 °C

The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...

DN: 0.25 in - 3 in
Pressure: 68 bar
Temperature: -29 °C - 200 °C

Stainless steel ball valve. With or without locking device. Full bore. EU1935

DN: 8 mm - 80 mm
Pressure: 16, 25, 40, 64 bar

AISI 316 2-PCS BALL VALVE WITH DIRECT ISO PAD AND DIN SHAFT 2 way full bore Stainless Steel ball valve ATEX II2 G/D CT3 - PN64 - Body, ball and stem in AISI 316 - TFM1600 seats - FKM ...

DN: 0.25 in - 2 in
Pressure: 10 bar - 28 bar

Product Information Material: Bronze Seat: RTFE Thread: female NPT x female NPT

DN: 0.25 in - 3 in
Pressure: 0 bar - 63 bar
Temperature: -25 °C - 180 °C

TECHNICAL INFORMATION1. Stainless steel full port ball valve, 2 pieces2. Thread ends according gas EN 10226-1 (EX ISO 7-1 e DIN 2999)3. Made of AISI 316 (CF8M)4. Ball seats PTFE + 15% G.F.5. Blow-out ...