... corrosion. Thanks to these features, Böhmer ball valves are among the few valves with API6D and API6DSS certification. For your application we deliver the ball valves with welding ends or flanges. ...
Pressure: 60 bar
... The CAREL E3V electronic expansion valves cover a range of cooling capacities up to 180kW, and represent the Carel solution for medium-capacity valves. The E3V has been designed with special care to the minimum details, ...
Pressure: 0 bar - 0 bar
Temperature: 250 °C - 450 °C
... Bakeable leak valves are used to control the flow of gas into a vacuum system from an external source. A soft metal pad is compressed against a harder metal seat, creating the necessary seal for precise gas ...
DN: 50 mm - 300 mm
... Gas approved high performance wafer butterfly valve. Liner in gas approved NBR rubber, vulcanized on back-up ring. Suitable for vacuum. ATEX - DVGW - SIL ...
Dansk Ventil Center A/S
Temperature: -40 °C - 120 °C
... cavity vented to prevent Pressure lock Schrader valve options: 1/4” or 5/16” schrader valves available Integral schrader access fitting on brass body Full flow port design on valves 3/8” ...
Henry Technologies
DN: 150 mm - 3,000 mm
... Gas Valve GR Series - Knife gate Flanged damper, square, knife gate type, closed. ...
DN: 0.25 in - 4 in
... absolute minimum. All valve assemblies are housed within the single forged barstock body whilst the end connections incorporate the valve sealing face to ensure a single piece of material up to and including the first ...
DN: 8 mm - 100 mm
Pressure: 0.5 bar
Temperature: -20 °C - 60 °C
... for gas from –20°C to +60°C Pressure limits: for gas MOP5 (20) SPECIFIC FEATURES: • The VENUS valve, with full bore, has been designed to comply ...
EFFEBI
DN: 0.5 in - 12 in
Pressure: 110 psi
Temperature: 200 °F
... sanitary high performance 316 butterfly valve series stand above others in the sanitary and fine chemical fields. The valves incorporated an advanced design with characteristics unseen in other valves. ...
DN: 15 mm - 25 mm
Pressure: 1.6 bar - 26 bar
Temperature: -196 °C - 650 °C
... P9/J9 series valve featuring special "needle" trim design and cage type top guide structure. Trim overlay welding with special alloy. The actuator for P9 series can be QLM series sliding pneumatic type or EML series electric type. P9/J9 ...
Wuxi Smart Auto-control Engineering Co., Ltd.
... cast iron, steel and AZ pipes DN 80 - 500 • For sluice-free tapping under pressure without auxiliary valve • for water up to PN 16 • optional for gas up to PN 5 ...
DN: 0.5 in - 2 in
Pressure: 209 bar - 690 bar
Temperature: -54 °C - 538 °C
... mounting of bonnets not wetted to avoid seizure and leaks Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life Metal valve seat with leak-tested tightness in ...
WIKA Alexander Wiegand SE & Co. KG
... using an arrangement of ball valves and/or needle valves in the same valve body. For applications with liquid or dirty media, ball valves are recommended due to easy cleaning of the ...
WIKA Alexander Wiegand SE & Co. KG
DN: 5, 10 mm
Pressure: 138 bar - 690 bar
... natural gas and aggressive media. The compact design integrates two shut-off valves to separate the process from the instrument side. The modular monoblock design allows using an arrangement of ball valves ...
WIKA Alexander Wiegand SE & Co. KG
... As its name suggests, the exhaust gas recirculation valve – EGR valve for short – recirculates finely metered quantities of exhaust gas to the engine intake system. By ...
Temperature: -50 °C - 105 °C
... TECHNOR® drainage valve for installation on enclosures with increased safety intended for use in explosive atmospheres zones 1 & 2 ( gas), 21 & 22 (dust). This valve allows condensation to be drained from ...
DN: 0.78 mm - 1.32 mm
Pressure: 0 bar - 7 bar
... M Series Solenoid Valve is a sub-miniature 2- or 3-way valve that implements efficient power conservation. In battery-powered applications, the M Series can be designed for extreme low wattage conditions. It features ...
DN: 32 mm - 225 mm
Pressure: 10 bar
... of Application The FRIALEN-Ball Valve KHP with NBR-sealing is suitable for shutting off sections of the main and also for isolating house connection pipes. The Ball Valve KHP can be applied in pipe systems for ...
Aliaxis
DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min
... straight body heavy wall steel tubing for body material—minimizes valve distortion. Applications Marine/Shipping - Mid Stream Gas - Mining - Natural Gas Pipeline Transmission - Oil & Gas ...
... 3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited to liquid service, ...
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 10 bar
... In cooperation with HiP High Pressure Equipment, we offer an extensive range of valves — also known as high pressure valves. With pressures up to 10,000 bar (150,000 psi), we provide a suitable solution for every application. ...
... stainless steel from DN 3/4” up to DN 2″ with interruption of service, the system is used in the following industries: > Gas > Water > District Heating > Petrochemical ...
DN: 25 mm - 100 mm
... Stainless steel valves by VLS Components include ball valves, butterfly valves, two-way valves for nitrogen and non-return valves. Sizes of stainless steel valves ...
Pressure: 10 bar
Temperature: -20 °C - 60 °C
Flow rate: 25, 35 l/min
... Economizing valves for regulators Regulating valve to be placed at the outlet of central regulators for arc welding to reduce the welding pressure. Total safety and reliability. All our regulators are tested for ...
Pressure: 16 bar
Temperature: -20 °C - 40 °C
... Outlet valve for gas cartridges • Adjuster for metallic gas cartridges • according to DIN EN 417:2012 • outside thread M 10 x 1 • CE-0085CQ0255 ...
DN: 150 mm - 2,500 mm
Pressure: 5 bar
Temperature: 1,000 °C
DN: 13 mm - 200 mm
Pressure: 3.5 bar
... conveying lines Pinch valves permit the interception of the flow of materials in pneumatic conveying systems. Cheap solution, easy to install and with low maintenance, pinch valves are ideal for the passage of fluids ...
DN: 65 mm - 350 mm
... All gas fittings of the latest generation are characterized by a free cross-section corresponding to the nominal size and are “TA-Luft” certified. The adjustable lubricating gap allows an optimal lubricant application and particularly ...
the best suppliers