Gas valves

The 5A regulation valve is ideally suited for regulating the flow of gases and liquids. Due to its special design it is able to regulate and shut off media. The regulation valve is highly resistant to ...

DN: 40 mm - 1,200 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

... more achieving friendly working. Zero leakage perfects the sealing performance especially in Gas and Air applications. Fully Lining Full EPDM lined valve interior completely isolating ...

Pressure: 0 bar - 16 bar
Flow rate: 40 l/h - 200 l/h

... changes, liquefaction of chlorine gas. GENERAL The M 3480 C gas chlorine pressure reducing valve is used to sink down the unregulated gas pressure to a steady ...

DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -60 °C - 280 °C

... body threaded ball valves are available in sizes from DN8 to DN100 with BSP threaded end connections. Face to Face Dimensions are according to DIN3202-M3 and PN63 working pressure. Ideally suited to be used as a manual ...

DN: 0.75 in - 6 in
Pressure: 0 psi - 600 psi

The LSV-100® Control Valve is an economical control valve designed for flanged applications. Trim is replaceable in the field through the bonnet. Construction is Carbon or Stainless Steel with stainless ...

DN: 0.25, 0.125 in
Pressure: 1,000,000 Pa
Temperature: 0 °C - 120 °C

... offers simple-type, precision-type and various other needle valves, and also manufactures flow controllers having a combination of a needle valve and diaphragm as well as proportional solenoid valves ...

The TEFFSA 409 Multi-outlet Safety Control is a flame safety gas control that is designed for applications where more than one burner is to be controlled, such as vent free gas fires. ...

DN: 10 mm - 80 mm
Temperature: -10 °C - 250 °C

Classification:Angle valve Click:24 Date:2019/07/01 Orifice DN15-50 Pressure 0.03-1.6MPa Connection size 1/2-2、Flange

DN: 80 mm - 100 mm

The type 885 manually operated valve is manufactured by SED, and is made of a plastic bonnet and it has a hand wheel with optical indicator. It has a flexible and encapsulated diaphragm suspension. The valve ...

DESIGN Body consists of 2 parts, full bore. For all gases according DVGW-G 260/1 for gas shut- off valves. PN1-5 OPERATION Rotation of the handle through 90*. CONNECTION Female thread: VV - 2', ISO 7/1R Female-/male ...

DN: 0.25 in - 2 in
Pressure: 0 Pa - 32,000,000 Pa

... Shanghai Product Description Forge Fip x Fip brass gas ball valve Forged brass body standard port USA standard SIZE: 1/2'' FIP brass gas valve 3/4'' FIP BRASS ...

DN: 32 mm - 50 mm

This Industrial valve is a ball valve GB 2-way type characterized bya round body. Ball seats measure from DN32 to DN50 with O-rings in NBR, FKM, EPDM and MVQ. This ball valve works with ...

... shaft to return to the closed position. Valve can be opened by use of operating lever, if a pneumatic actuator is used it will open with the actuator. Valve can be closed by remote cable or pneumatic ...

DN: 0.25, 0.5 in
Pressure: 150 bar
Temperature: -75 °C - 190 °C

The M Valve is a miniature air operated proportional control valve for use on liquids or gases. Available for 1/4and 1/2line sizes, a wide range of inner valve trims offer flow control ...

Stainless Steel Waist Drum Angle Seat Valve Features: Compact and lightweight Large flow and low resistance long lasting... Interface: DN15--DN50 Body material: stainless steel 304 Pneumatic form: plastic ...

DN: 6 mm - 100 mm
Pressure: 14, 16, 18, 40 bar

* Ball valve made of brass * Full port design * Female threaded acc. to DIN ISO 228 * Lever Handle (red) * Marking according to DIN EN 19 * Blow-out proof stem with double O-ring sealing ...

DN: 10 mm - 50 mm
Pressure: 50 bar
Temperature: -196 °C - 120 °C

These cryogenic globe valves have a pneumatic actuator at PN 50. They have a bronze body and stainless steel topwork, with internal parts made from bronze. The actuator can be spring closed, air opened ...

DN: 14 mm - 85 mm
Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C

BRASS BALL VALVES Size:1/2“-4” [Technical Specification] Material Normal brass ; CW617N ;DZR Working Pressure PN25 or 2.5Mpa Seal PTFE Application Water ; Gas ; Oil Working ...

ThreadNPT FlowFull ConnectionsFxF ApplicationGas Stem configurationPacking Gland HandleLever BodyBrass ProductBall Valve Size 1/4" - 4'

DN: 150 mm - 1,200 mm

... high cycle and smooth operation ● Reliability: Reliability of valve operation affects service life and ease of inspection and maintenance. In order to predict reliability, a sound valve design must ...

DN: 40 mm - 200 mm

DN: 15 mm - 100 mm
Temperature: -20 °C - 300 °C

... Model NO.: Q41F Connection Form: Flange Nominal Pressure: 150lb to 2500lb Structure: Floating Ball Valve Function: Blow-Down Valve Application: Industrial Usage, Water Industrial Usage Class: ...

DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 170 °C

... wafer butterfly valves in Series J9 are equipped with a centred disc and wafer type body, and are made of ductile iron or stainless steel, manufactured in accordance with severe product norms and in conformity to EN ISO ...

Pressure: 0 bar - 64 bar
Temperature: -20 °C - 180 °C

Stainless steel ball valves - 110 series Technical features - stainless steel AISI 316 body - stainless steel AISI 304 handle - O-ring and ball sealings in PTFE - maximum working pressure : 64 bar (40°C) - working ...

DN: 0.5 in - 8 in
Pressure: 0.5 bar

Gas shut off valves N.C. with manual reset. Normally closed: must be continuosly powered to allow the gas flow. Power consumption: 19VA. Max working pressure 500mBar.