Hydraulic injection molding machines

Clamping force: 15 tf - 550 tf

... Vertical Clamping Vertical Injection Series Four-column/vertical clamping, vertical injection. Rectangular shapebetween tie bars for easy insert. Twin injection cylinder ...

HRN series - horizontal injection molding machine *Injection 1. Standard with One Injection 2. Application： Available for applications of thermoplastic ...

Clamping force: 140 tf - 1,700 tf

HDC series - multi-injection molding machine *Injection 1. Multi-injection (>two independent screw barrel sets) such as -Horizontal injection*2 -Horizontal ...

Clamping force: 1,177 kN - 1,570 kN

... standard drive, a direct drive by means of a servo motor is offered, which allows for simultaneous plasticizing. This machine series has a smaller footprint than its predecessors and is easy to operate due to its ...

Clamping force: 1,569 kN - 4,903 kN

... Servo-electric high-performance injection molding system for thin-walled products •Injection units in 3 sizes for injection speeds of up to 600 mm/s and injection ...

Clamping force: 3,922 kN - 10,787 kN

The MacroPower E Hybrid consists of a modern, servo hydraulic 2-platen clamping unit combined with an all-electric high-speed injection unit capable of 450 mm/sec injection ...

... 65NⅡ is a compactly made preform molding machine. It makes use of a vertical clamping system. It has the ability to mold preforms up to 94 g in 8 cavities utilizing the IU-65 injection ...

Using PP and PET resin, PM-70/111N is a preform molding machine. It uses the 2-step molding system. The first step is the heat-setting, followed by the molding process ...

Clamping force: 1,669 kN

The PM-170/111M is a jar and bottle preform molding machine. It is specifically designed for the production of large mouth jar preforms, from 24 cavities up to 48 cavities. The equipment features a clamping ...

Clamping force: 150 kN - 1,000 kN

COMI builds vertical injection presses for rubber,hydroblock closure with tonnage from 150 to 1000 tons and with FIFO or LIFO injectors from 1050 cc to 12,000 cc.

Clamping force: 1,000 kN - 40,000 kN

... configuration. The clamping force of D-i servo injection moulding machine range from 600KN to 40000 KN, and injection size from 62cm³ to 67906cm³. D-i IMM machine is ...

Clamping force: 4,000 kN - 40,000 kN

Introduction TEDERIC D-JI low pressure injection molding machine developed by Tederic Company combines extrusion and injection technology to form a dual-stage injection ...

Clamping force: 5,000 kN - 40,000 kN

... TEDERIC D-JII medium-to-high pressure dual-stage injection molding machine, developed by TEDERIC Company, combines extrusion and injection technology to form a dual-stage ...

Clamping force: 1,400 kN

... 10.Mixed design of T-shape groove and die hole, increases universality of the mould. Two.The Injection Section. 1.Bridge type support, improves injection smoothness. 2.Longer length-diameter ratio ...

Clamping force: 1,780 kN

... 10.Mixed design of T-shape groove and die hole, increases universality of the mould. Two.The Injection Section. 1.Bridge type support, improves injection smoothness. 2.Longer length-diameter ratio ...

Clamping force: 2,180 kN

... 10.Mixed design of T-shape groove and die hole, increases universality of the mould. Two.The Injection Section. 1.Bridge type support, improves injection smoothness. 2.Longer length-diameter ratio ...

Clamping force: 900 kN - 25,000 kN

This SERVO injection molding machine is designed for your Universal Processing applications this series of machinery is fast, accurate and has Excellent Repeatability. THREEPLAST Servo ...

Clamping force: 1,700 kN - 4,200 kN

This Servo drive machine is Special designed For your PET Preform Processing applications . this series of machinery is fast ,accurate and has Excellent Repeatability .THREEPLAST PET Preform Injection ...

Clamping force: 900 kN - 6,000 kN

This Servo drive machine is designed For your PVC products Processing applications . this series of machinery is fast ,accurate and has Excellent Repeatability. THREEPLAST, pvc upvc pe pipe fittings injection ...

Clamping force: 3,000 kN - 24,000 kN

Product characteristics： Machine designed particularly for high voltage composite insulator applications. Precise components and high quality supporting parts extending service life. Close-loop temperature control ...

Clamping force: 2,000, 3,000, 4,000, 5,000, 10,000 kN

... series rubber injection machine DKM-RV series are suitable for Natural Rubber(NR), Nitrile Butadiene Rubber(NBR), Ethylene Propylene Diene Monomer(EPDM), Isobutylene Isoprene Rubber, etc. DKM-RV series ...

Clamping force: 250 kN - 800 kN

Adopts plasticizing and injection completely separated, first-in-first-out (FIFO) method. Precise injection volume，minimum injection runner length, and floating-type nozzle ensures excellent ...

Clamping force: 1,550 kN

... station injection molding press: 1 injection station (A), 2 curing stations (B and C), 1 demolding station (D). The CMX machine is available with two clamping forces: ...

Clamping force: 5,100 kN

Machine features: - Clamping force: 5,100 kN. - Size of the platens: 630 x 800 mm (800 x 800 mm optional). - Injection volume: 2,000, 8,500 or 11,000 cm³. The G10 Extended range, performance for ...

Clamping force: 1,600 kN

Machine features: - Clamping force: 1,600 kN. - Size of the platens: 430 x 510 mm. - Injection volume: 1,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet ...

... manufacturing processes for the machine frame features high rigidity, ensuring the sturdiness, stability and reliability of the whole machine. Injection Unit Stable and Minimum Friction Optimized ...

D1 Series Two-platen Injection Molding Machine 1100T-2400T Innovative Practice of Large-tonnage Two-platen Machine Clamping unit ndependent high-pressure cylinder ...

PET Preform Injection Molding Machine 90T-480T Meet the Needs of High-quality Plasticizing Suitable for injection molding of PET preforms High-quality ...

Roboshot All Electric Injection Molding Roboshot is the next generation of Artificial Intelligence (AI) in injection molding machines, with higher ...

Clamping force: 500 kN - 5,500 kN

... mechanism with advanced user-friendly controls, the Magna T Servo is a high-value injection molding machine. Reduced heat generation results in longer life for the hydraulic ...

Unique Prefill Cylinder Design Fast Tonnage Built-up Time Large Ram Diameter Provides Uniform Force Distribution across Platen Provides Excellent Mould Squareness & Parallelism Reduces Mould Wear Generous ...

Clamping force: 1,500 kN - 14,000 kN

... lubricants. Stork offers a wide choice in drive systems which enables us to offer you always the fastest and most energy efficient machine. Thanks to enlarged opening-strokes, IML and take-out is possible in one movement ...

Clamping force: 1,500 kN - 8,000 kN

... to offer you always the fastest and most energy efficient machine. Extremely thin-walled flowerpots require extremely high injection speeds. The Stork Pot-Line combines an extremely high injection ...

Clamping force: 3,000 kN

It was with injection molding machines that the Ettlinger success story first began, yet what is it exactly that makes them so unique? Our injection molding ...

Clamping force: 25,000 kN

... forces suffice even for complex pallet geometries with a closed deck. In addition to fully hydraulic machines, we can also supply hybrid models with an electric driven ...

Clamping force: 8,000 kN

... relatively low clamping forces, our injection molding machines also offer a high degree of variability for complex injection processes, which are often inevitable when ...

Clamping force: 100 kN

... new development from BOY – an injection moulding machine designed with well-proven technology and all the merits of our larger machines. BOYs range of products is completed by the very ...

Clamping force: 100 kN

The BOY XS V features vertically arranged clamping and injection units. Being the smallest model, it supplements the reliable series of BOY insert moulding machines. This machine is suited ...

Clamping force: 250 kN

... extremely compact injection moulding machine is simple, clear and economically designed. The cantivelered clamping unit features easy access and room for numerous options including automated systems. Six ...

... efficiency for our customers, and with our wide range of machine models, we can handle any specific production requirement. ARBURG is our exclusive distributor for rotary table injection molding ...

Clamping force: 498 kN - 4,484 kN

TH series are versatile hydraulic injection machines, capable of applying variety of options depending on the needs of our customers. Depending on the user’s option settings, TH-S (energy ...

Clamping force: 1,295 kN - 2,192 kN

... are dual (2color) injection machines that are designed to be suitable for modling 2 types of resin or colored products at a time. Rotary table controlled by the servo motor and 2 horizontal injection ...

Clamping force: 4,484 kN - 34,874 kN

... the 2 platen direct injection machine to conserve the area of installation and at the same time, wide open mold distance and tie bar spacing are guaranteed therefore it is suitable to take action for ...

Clamping force: 94, 193 kN

... space-saving design machine series that can flexibly be adapted to many automatic molding systems. We are now introducing the new generation series that has further evolved by equipping it with the "X-Pump" ...

TV99 fastest fully automatic machine used for the heading of tubes at a speed of up to 300 pieces per minute using the injection moulding technology from Aisa. Key benefits • Fastest tube injection ...

... control inspection Machine specifications MACHINE CAPABILITIES Up to 300 parts/min. 32 to 72 cavities 6-8 rotary stations

... thin wall injection molding machines, especially for high speed injection machines. We use high thin wall injection molding ...

Clamping force: 500 kN - 2,680 kN

Dakumar standard molding machine series are from DKM50 to DKM1600 and on Oct of 2010, DKM 2000, DKM2600 and DKM3600. These three new models of molding machines will ...

Clamping force: 880 kN - 5,000 kN

... manufactures variable pump moulding machine series of model no. from DKM50 to DKM1080. The variable pump is a wise hydraulic system which can deliver the hydraulic oil according to the ...