Pressure: 240 bar
... DD and DM Valves are completely hydraulic in operation and will deliver either oil or grease. These Dualine valves are also fully and individually adjustable in regard to discharge quantity and are equipped with operational indicators. Each DD valve ...
DN: 10, 16 in
Pressure: 0.1 bar - 0.8 bar
Temperature: 1 °C - 42 °C
... Exclusive NSF Certified electronic control valves with proven piston, seal & spacer technology. Simple user-friendly, 2 line / 16 character LCD backlit display. Rotating ‘no touch’ diagnostics shows key data like date last regenerated, volume remaining, ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 210 bar
Flow rate: 0 l/min - 55 l/min
... Variable Flow Control Valves maintain the flow rate of hydraulic fluid to a selected value. Applications include hydraulic cylinders requiring constant extension or retraction speeds and hydraulic motors requiring constant rotational speeds. When used ...
The All-Hydraulic ARV (ARV-H) can accommodate a wide range of tension and water depth scenarios — all with no required feedback for the position of the tensioner rod. That’s because the engineers behind the Olmsted valves provided by Oilgear developed ...
DN: 0.5 mm - 2 mm
Pressure: 14, 32 bar
Temperature: 198, 100 °C
... The GV32B bronze in-line stop valves are designed for use with steam, water, oil or air applications. Rising stem. PTFE renewable plug. High quality PTFE steam seals. Saturated steam, condensate, water, oil, compressed air and other fluids compatible ...
VALSTEAM ADCA Engineering S.A.
DN: 2 in - 40 in
Pressure: 0.6 MPa - 16.5 MPa
Temperature: -29 °C - 150 °C
... - Use electric actuators to drive them open and closed, power-to-open and power-to-close. - Electric valve actuators typically convert high speed low torque output motors into low speed high rotary torque output that drives the valve via a gearbox. - ...
Athena Engineering S.r.l.
DN: 50 mm - 800 mm
... GA30 Series valve contains a disc or gate that slides into the path of the flow to block the fluid path and out of the way of the flow to reopen the path. Gate Valve Prod Gate valves are typically used when a straight-line flow of fluid and minimum ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
The valve will allow flow from the higher pressure of port ① or ③ to the port ②. The valve is commonly used to direct oil from the pressure side of a bidirectional hydraulic motor to a pressure-released hydraulic brake.
Ningbo Hoyea Machinery Manufacture
DN: 0.5 in - 2 in
Pressure: 16 bar
Temperature: 0 °C - 100 °C
... Functional design for multi-unit installation Special brass spacer to protect the cylinder from incompatible fluids Colosing-against-flow type to avoid water-hammer Advantages • Compact design allowing install in reduced space plants • Versatile ...
MAROS Engineering
Pressure: 15 bar - 300 bar
Temperature: -20 °C - 100 °C
... DPA PROGRESSIVE DIVIDERS LUBRICANT DISPENSING SEQUENCE The initial piston dispenses lubricant to the outlets corresponding to the final piston. The final piston dispenses lubricant to the outlets corresponding to the central piston or, if more than ...
I.L.C. srl
DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C
... Vacuum resistance Design and manufacturing of our 2-piece and 3-piece ball valve allow a vacuum capability of at least 10-3 mbar (0,75 10-3 Torr). PED directive According to Pressure European Directive (PED) 97/23/ CE, all our ball valves are controlled ...
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air.
SAF S.R.L.
DN: 20 mm - 200 mm
Pressure: 10, 16 bar
... • Face to Face: IEC60534 • Flow feature: straight line, equal percentage, quick opening • Stem seal: bellows & packing seal, packing seal • Adjustable rate: 50:1 • Trim material: PFA, F46, PTFE • Designed standard: DIN En1349 (Conform: ...
ROPO GmbH
DN: 0.125 in - 0.75 in
Pressure: 210 bar
Temperature: -20 °C - 100 °C
Double-acting flow control valves available from 1/8" to 3/4" bsp, max.working pressure 210 Bar, adjustable oil flow rate from 0,5 to 80 Lt./min. (depending on the size)
F.lli TOGNELLA
DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C
... Series UNIVERS 1200 cryogenic - Globe, control or check valve and filter available - Suitable for medium temperatures from -271° C to -30° C (2K to 243K) - with adequate stem extension - For installation in vertical position or inclination of up to ...
STÖHR ARMATUREN GmbH & Co KG
Pressure: 200 bar
Temperature: -20 °C - 65 °C
... Key advantages - High pressure brass cylinder valve for oxygen and oxygen mixtures (>20% O2) service - Permanent gas tight seal - Specific filling adaptor required - Residual pressure valve inline execution - π marking according TPED directive - ...
Rotarex
DN: 3 in
The OPW 6500 series angle loading valve, made in cast aluminum, allows fluid to be held in the line out to the end of the loading arm. The aluminum body is constructed with stainless steel trim for a range of fluid handling capabilities. It has the “deadman” ...
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 200 °C
... In-line Valves • Extracts a liquid sample from pipeline. • Installed on Horizontal or Vertical pipeline. • Sample is representative. • All wetted parts are made from corrosion resistant materials. Materials of Construction • 316L SS • Hastelloy ...
DN: 15 mm - 150 mm
Pressure: 16, 40, 50 bar
Temperature: -40 °C - 280 °C
... Fully lined or stainless steel Sampling Valves for safe and representative sampling of corrosive and aggressive process media from pipelines, pressurized or under vacuum. Gaseous samples can be provided by means of the Piston Injector. Main features • ...
DN: 0.25, 0.375, 0.563 in
Pressure: 30,000, 10,000, 20,000 psi
High Pressure Equipment Company has developed a complete line of valves and affiliated components specifically for the unique requirements of the oil and gas industry. We offer valves, fittings and tubing for use with sour oil and gas (H2S) . Our "SGS" ...
DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C
... Our shut-off valves are designed primarily for incorporation in pump suction pipes and in the basic version have an SAE mounting face with connecting dimensions complying with SAE-Norm J518 - 3000 psi. The key feature: Thanks to clamping bolts inside ...
DN: 0.5 in - 4 in
Pressure: 1,000, 800, 600 psi
Temperature: -20 °F - 450 °F
... Size Range 1/2"~4" Working Pressure 1/2"-2" 1000PSI, 2-1/2"-3" 800PSI, 4" 600PSI W.O.G Temperature Range: -20 to 450°F END Type T-Clamp Options Padlocking Device Actuator Mountin Bracket Direct-Mounting ...
DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F
... Material: Acetal Copolymer Colors: Orange, Black, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite ...
LOCKWOOD
DN: 100 mm - 350 mm
Pressure: 5 bar
Temperature: 120 °C
... The HDPV2 Gate was originally developed to isolate silos in applications where high pressure aeration is used to fluidize powder discharge. Over time, the HDPV2 Gate has been redesigned and modified for greater application versatility. Ideal application: ...
DN: 25, 32, 40, 63 mm
... Our Eco Line gate valve is our gate valve in composite material with high strength and metal-like properties. The material technology and product design give the gate valve extremely long life and safe function. It is also lead-free and corrosion is ...
Isiflo AS
the best suppliers