Maximum temperature: 90, 220 °C
Pressure: 2.6 bar - 8 bar
... Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 44 Lt. ...
Didar Industrial Cooling INC
... The FKS fluid-bed cooler-sifter is an installation for the treatment of dry silica sand. The sand is cooled down to processing temperature and thoroughly dedusted to reach an excellent quality level. The FKS is particularly distinguished ...
KLEIN
... The gas cooler is used in gas analysis to lower the dew point of the moist sample gases. ...
Power: 50 kW - 250 kW
Flow rate: 7.2 m³/h - 46.2 m³/h
Pressure: 2.7 bar
... electricity consumption. Machine suitable for both internal and external installation built with galvanized sheet metal carpentry painted with polyester powders. Remote command Remote Support Internal hydronic group Refrigerant ...
Power: 3.3 kW - 3.9 kW
Maximum temperature: -10 °C - 45 °C
Flow rate: 24.3, 29.1 l/min
... Digital controller & self-diagnosis High-performance and low-noise Both room temperature synchronization type and temperature fixture type Precise control of the oil temperature up to 45℃ Power Supply - 3P 230V 50Hz Available Oil - Lubricating ...
... Water Chiller is designed to reduce water temperature and keep it constant for dough production. With an exterior stainless steel finish, it is fitted with an insulated tank, a compressor, a coil and an agitator. This lowers the temperature ...
Power: 1,150, 900 W
Maximum temperature: 5 °C - 38 °C
... Efficient Design The chiller is characterized by a solid structure designed to provide a perfect protection against oxidation and it is therefore perfect to be used with salt water. Unique Features These units are also suitable for ...
TECO Srl
Power: 200 W
Maximum temperature: -8 °C - 3 °C
... The cooling and condensing systems have got special importance for the survey finality as well as for the sampler's protection. IGLOO is different from the other cooling and condensing systems, since it is equipped with an independent refrigerating system. This ...
TCR Tecora
Power: 210 kW - 808 kW
... Tandem scroll per refrigerant circuit. Large cooling capacity range with scroll technology with a maximum reliability thanks to the multi circuit. High ESEER. Total or partial heat recovery. Choice of the sound level Easy maintenance Analog set ...
WESPER
... exchangers or immersion coils and controls for use with plant chilled water systems or provide standalone air cooled liquid chillers for temperature control. ...
Power: 1,300 W
Maximum temperature: 20 °C
... Standard reference conditions ISO 7183: – ambient temperature Min Max: 2/40°C – liquid temperature Min Max : 5/50°C – temperature nominal 20°C – liquid: H2O ...
ATS
Power: 6 kW - 56 kW
... SHOCK FREEZERS Shock Freezers are used in applications where it is desired to be frozen in a short time. It guarantees stainless steel with its oven paint method and quality paint. It offers a wide range of products. Compliance with Shock Rooms ...
... fin vertical cooler mod. RVA is mainly used in the milling industry to cool granular and solid products such as husked or chopped wheat, etc.., in a quick and effective way thanks to a forced air flow passing through ...
... FROMFROID has developed a unique product on the market: High Performance Cooling cells. These patented cells have been developed by our engineers to meet your needs: Large variability of pallet heights Significant reduction of energy consumption: ...
Flow rate: 3.3 m³/s - 8.1 m³/s
... (adiabatic cooling) and ventilation principally for larger industrial and commercial premises. It has been hygienically tested and certified to VDI 6022. The CoolStream S evaporative cooler helps keep larger internal ...
Colt International Ltd
Power: 2 kW - 52 kW
Maximum temperature: 20 °C - 35 °C
... RACA OIL are chillers regulating the cutting fluid emulsions used in boring machines, grinding press machines, wire drawing machines, where oil shall be kept at a certain temperature for a proper working. Available in ...
Frigosystem S.r.l.
Power: 2,492, 1,767, 636 W
Maximum temperature: -20, -10, -40 °C
Flow rate: 3,740 m³/h
... SPECIFICATION Capacity: (Grids not supplied) Compatibility GN 1/1 and 600 x 400 7 pairs of 3 points renforced grid holders included Blast Chilling: 35 kg, cycle 110 min, 32 kg, cycle 90 min, cooling of mashed potatoes in 5.5 cm thick GN1/1 ...
Power: 19.9 kW - 832 kW
... especially suitable for cooling plastics and rubber working machines, die-casting machines, plating plants, ceramic presses and other industrial processes. ...
Industrial Frigo S.r.l.
Maximum temperature: -20 °C - 48 °C
... more than 10 safety protection functions; Chiller unit is suitable for operation in a wide outdoor temperature range, from -20˚C~48˚C The system keeps operation when parts of compressors failure The chiller adopts ...
... white or blue. > Adjustable stainless steel knives at either end of the tunnel. > Drive at the end of the tunnel. > Cooling system completely insulated and double jacketed. > Direct or indirect convection or radiation cooling. > ...
... Rotary Cooler Rotary cooler is a cooling device which is based on conventional rotary cylinder and has a regular internal installation of cooling heat exchange tube. In the cooler, the material flows ...
... BIC industrial water chillers have been developed for large industrial bakeries and bakeries in countries with very high ambient temperatures (above 32°C). BIC water coolers are custom-made, ...
Power: 2,000 W - 170,000 W
Maximum temperature: 5 °C - 45 °C
Power: 2 kW - 360 kW
Maximum temperature: 0 °C - 25 °C
... solution, easy to install and manage• Non-ferrous hydraulic circuit including non-ferrous water tank• A differential pressure switch ensures system shut down if the circuit runs dry.• Maximum ambient temperature up to 48°C on standard ...
... The VAS Cooling system offers a range of significant benefits for modern tobacco processing. It ensures the retention of filling power after drying, delivering high-quality results that enhance product consistency. With minimal deviations ...
Maximum temperature: 0 °C - 200 °C
... More than 1000 KAHL belt units are in operation worldwide and work in different sectors. Before you decide on a belt drier, you have the opportunity to perform a belt drier simulation for your project in our pilot plant. Both cooling and drying are ...
Power: 1.8 W - 15 W
Maximum temperature: 5 °C - 50 °C
Immersion type oil cooling units for cutting/grinding liquid that achieve high energy saving rates, low noise, and high-accuracy temperature control.
Maximum temperature: 41 °F - 86 °F
Flow rate: 1,350 ft³/min - 38,850 ft³/min
... temperature requested, despite ambient conditions and load requests. Parker Hyperchill water chillers celebrate a presence of over 30 years in the industrial chiller market. This experience has led ...
... operational performance These are complete pure-water cooling systems for various industrial applications with cooling capacity from 2 kW up to several megawatts. These solutions are for a wide range of industrial, ...
Power: 230, 330 W
Flow rate: 2.2, 2.6 l/min
... •High cooling capacity (200 kj/min) • No priming water required Cascade pump eliminates the need for priming water. •Easy maintenance No tocls are required to replace coolant. Tank and fille^ are easily removable, which makes for easy cleaning lo reduce ...
Power: 1.8 kW - 6.5 kW
Maximum temperature: -20 °C - 55 °C
Flow rate: 400 l/h - 1,500 l/h
... of cooling water are needed, BARTEC BENKE closed loop chillers can be supplied to meet these applications. The chillers can be supplied with diverse refrigerating capacities which allow the chillers to ...
Maximum temperature: -40 °C - 350 °C
The Fabfin heat sink stands out from ordinary extruded heat sinks because of its increased surface area, giving it excellent performance. Using a swaging process means a variety of its higher fins and increased height-to-space ratio types of fins can ...
Power: 76 kW - 360 kW
Maximum temperature: 5 °C - 45 °C
... specific need. • Available with remote monitoring. • Completely configurable with many options and kits to fit many industrial applications needs. • Condenser filters • Independent condensing plenum. • Full access and easy ...
... - Inlet Air Cooling System for GT system - Semi Dry-Fog®, a fine fog with a mean droplet size of 10-30 μm, cools gas turbine intake air and improves power generation output during hot weather. Cooling by 5°C increases ...
... factors such as the cooling subject and the environmental conditions. Therefore, we recognize the need to customize the cooling system for each specific scenario. As an example, let's consider the cooling of iron. Depending on the ...
... different applications, a polyurethane system often requires extremely exact temperature control methods. Hennecke uses industrial chillers with water circulation whose types and dimensions correspond to the pre-calculated ...
Maximum temperature: 300, 250 °C
... Savings in primary energy and fuel through use of the preheated, dust-free and dry cooler exhaust air; consequently, filter systems for post-treatment of the warm cooler exhaust air are not required. Robust design: ...
... Cooling Units Answering to the many industrial needs, SIMACO - leader in the fluid moving technology - designed a dedicated range of close loop air-water cooling units, where the SIMACO pump, actual beating heart, is naturally assembled. This ...
Maximum temperature: 16 °C - 38 °C
... should be tepid. In extreme hot climates solar radiation can heat water within the tank to dangerous levels. The Zero Power Cooler, designed and developed in collaboration with Celantel, uses the night time ambient temperature to maintain ...
Power: 480, 500 W
Maximum temperature: -10 °C - 35 °C
Flow rate: 3.5 l/min
... Product overview
- Ultra-compact water recirculating chiller designed for Minimum Film Forming Temperature (MFFT) instruments
- Cooling capacity 480 W (@17°C set point)
- Supplied ready-to-use, no customer
Power: 8.61 kW - 29 kW
Flow rate: 1.36 m³/h - 4.42 m³/h
... various models, can fully meet the demands of industrial production. 7.Europeanization designed exterior with electrostatic spray coating, simple structure and elegant appearance. Application : industrial chiller ...
Power: 3 W - 5 W
Flow rate: 100 l/min - 360 l/min
... various models, can fully meet the demands of industrial production. 7.Europeanization designed exterior with electrostatic spray coating, simple structure and elegant appearance. Application : industrial chiller ...
the best suppliers