... modern and precise flow meter with internal data logging. Equipped with two analogue inputs and two PULS inputs, can measure flow and other values, such as temperature and humidity. In addition FP4 has ...
Volumetric flow rate: 0.3 l/min - 240 l/min
Process temperature: -10 °C - 80 °C
Process pressure: 10, 16, 15, 20, 25 bar
... Flowmax 44i is a flow meter calculating the volume flow of liquids. MIB GmbH - Ultrasonic Flowmeter Flowmax 44iBased on the ultrasonic technology Flowmax 44i is able to measure conductive ...
MIB GmbH Messtechnik & Industrieberatung
Process temperature: -20 °C - 60 °C
Process pressure: 0 MPa - 26 MPa
Repeatibility: 0.1 %
... conditions into account. It has effectively solved the influence on the metering precision caused by flow distortions( such as turbulent flow, swirl flow, pulsing flow etc). CL-1-4S ...
Jiangsu Flowna Intelligent Technology Co. Ltd
Process temperature: -20 °C - 60 °C
Process pressure: 0.6 MPa - 42 MPa
Precision: 0.5 %
... for users; 4.Multiple work mode: W803E has ‘ Flow Only’ mode, ‘ Flow + Pressure’ mode, ‘ Flow + Temperature’ mode for users. Compared with other liquid type flow meter, ...
Q&T Instruments
Process temperature: -40 °C - 85 °C
... /s to ± 15 m/s Resolution: 1 mm/s, min. wave height 3 mm Uncertainty velocity: ± 0.5 % of reading ± 0.01 m/s Uncertainty flow: Typically < 5 % of reading, depending on site conditions Min. distance to surface 0.2 m Max. distance ...
Process temperature: -20 °C - 100 °C
Process pressure: 16 bar
Precision: 1.5, 0.3 %
... mass flow meter measurement technology, the TGF200 series micro gas flow meters provide a low-cost option for correctly measuring dry, non-corrosive gas. This range is ...
... Construction of orifice flow meter Orifice flow meter provides an easy and cheaper arrangement for the flow measurement through a pipe. Orifice flange assembly consists ...
Process Control Devices
Volumetric flow rate: 30 l/h - 24,000 l/h
... Their universal connection facilitates use in various industrial types where no special fittings are required, allowing a quick installation. With them is not precluded any application compatible with AISI 316 and PTFE. ...
Craind Impianti
Process temperature: -20 °C - 60 °C
Process pressure: 0.25 bar - 4 bar
... control, to meet the requirements of gas companies for remote copying, monitoring, and control of industrial and commercial gas meter users, and to perform statistical analysis of gas ...
Volumetric flow rate: 10 l/min - 350 l/min
Process temperature: -20 °C - 105 °C
Process pressure: 0 bar - 10 bar
... inline mechanical flow measurement devices that are ideally suited for high- flow, low-pressure applications, including hydraulic fluid return lines and water processing systems. The flowmeters are non-intrusive ...
Volumetric flow rate: 0.1 l/min - 8 l/min
Process temperature: -20 °C - 70 °C
Process pressure: 0 bar - 50 bar
... For precise flow rate monitoring in oil circulation systems The SFZM gear wheel indicator is an oil flow monitoring device. It offers robust flow monitoring of lubrication points even ...
Volumetric flow rate: 35 m³/s
Process temperature: 0 °C - 400 °C
... Variable area pipeline flowmeter with high turndown capability. Comes as spring loaded variable version and in-line variable area version. Unrivaled 100:1 turndown. Can meter most industrial fluids, ...
Volumetric flow rate: 0.1 m³/h - 200 m³/h
Process temperature: -40 °C - 130 °C
... with MC608 is an AC mains-powered electromagnetic flow meter designed for district metering areas (DMA), water abstraction, custody transfer measurement of potable water (OIML R49), irrigation and industrial ...
BERMAD CS Ltd
Process temperature: -30 °C - 160 °C
... from each other. To carry out flow measurements with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe ...
Process temperature: -30 °C - 160 °C
... The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume ...
Process temperature: -40 °C - 60 °C
... cut them open. This enables the flow meter to be installed even during operation. Another special feature of the flow meter are the different outputs. It is possible to get the flow ...
Process temperature: -20 °C - 480 °C
Process pressure: -10,000 Pa - 10,000 Pa
... ultrasonic Flowmeter independently developed by Cubic-Ruiyi. Based on the TOF (Time of Flight) principle of ultrasonic wave, the gas flow rate in the flue is calculated through the time difference of ...
Cubic Instruments (Wuhan) Ltd.
Volumetric flow rate: 3 m³/h - 3,200 m³/h
Process temperature: -10 °C - 40 °C
Process pressure: 0 Pa - 200,000 Pa
... Biogas Flowmeter is based on technology combination of pressure differential and ultrasonic transit time differential measurement method. With a bypass structure in the flow meter, gas ...
Cubic Instruments (Wuhan) Ltd.
Volumetric flow rate: 0.4 m³/h - 1,600 m³/h
Process temperature: -20 °C - 65 °C
Process pressure: 0 Pa - 200,000 Pa
... Introduction Commercial and industrial use/ for natural gas or general use Gasboard-7200 gas flowmeter used the latest ultrasonic transit-time differential method to measure natural gas flow ...
Cubic Instruments (Wuhan) Ltd.
... amplitude and in frequency. Dynamic flow : The rate of flow is deduced from a mathematical analysis combined with a calibration (with real measures). Flow no Flow : The threshold can ...
Volumetric flow rate: 2 l/min
Process temperature: -40 °C - 85 °C
... 1.Overview: ZWIN-FM1006 gas mass flow meter, with high-precision MEMS micro gas flow sensor chip,which adopts thermal diffusion principle, imported from the UK , has ...
Volumetric flow rate: 0.2 m³/h - 95,560 m³/h
Process pressure: 1.6, 1, 0.6 MPa
... SMT) are implemented to improve the reliability. Electromagnetic flow meter technical parameters Display: reaches 8element liquid crystal display, current clock to indicate flow data. Two kinds ...
Volumetric flow rate: 0.1 m³/h - 110,000 m³/h
Process temperature: -40 °C - 150 °C
Precision: 0.2 %
... The electromagnetic flow meter offered by Tecnopenta Srl is the ideal tool for precise and reliable flow measurement of conductive liquids, even chemically aggressive ones, in industrial ...
Precision: 1 %
Repeatibility: 0.2 %
... accuracy, making them ideal for high- flow applications. The inline ball-style meters are more suitable for low- flow applications and provide a visual display of the flow rate on the meter’s ...
Volumetric flow rate: 50 l/h - 60,000 l/h
Process pressure: 10 bar
... The flow meter operates on the float principle and is used for flow rate measurements in closed pipelines. The medium flows through the vertically installed flow meter ...
Volumetric flow rate: 0.5 us gal/min - 10.5 us gal/min
Process temperature: -25 °C - 80 °C
Process pressure: 10 bar
... multi-function true union paddlewheel flow meter. The TF Series Paddlewheel Flow Meter provides high accuracy economically while ideal for thermoplastic piping systems. The TF Series ...
Precision: 0.5 %
... The VERIS Accelabar® is a new and unique flow meter that combines two differential pressure technologies to produce operating ranges never before attainable in a single flow meter. It ...
Armstrong International, Inc.
... It measures the quantity in litres of liquid passing through it. It works with flow rates from 10 to 90 lt/min and a maximum pressure of 3.5 bar. It displays the total liters up to 999999 liters and the partial liters up to 999 liters ...
the best suppliers