Jaw couplings

Torque: 7 Nm - 34,996 Nm
Rotational speed: 1.2 rpm - 5,900 rpm

This shaft coupling follows the latest European standards and comes with improved torsional softness, as well as angular misalignment capabilities, for angles up to 1.3 degrees. In addition to this, the failsafe mechanism ...

Rotational speed: 3,150 rpm - 24,500 rpm

... Type Standard Curved Jaw Coupling features backlash resistance and is perfectly suited for applications that require accuracy and precision. It is fail safe meaning it is still able to perform in the ...

Torque: 0.4 Nm - 1,412 Nm
Rotational speed: 0 rpm - 3,600 rpm

The L Type is a standard jaw coupling that consists of the industry's standard shaft coupling. It has the capability to provide assistance when parallel and angular shaft misalignment ...

Torque: 4 Nm - 1,250 Nm
Rotational speed: 4,600 rpm - 28,000 rpm

The ROBA-ES Series of shaft couplings from Mayr are guaranteed to provide an extensive overall quality of product performance and operating efficiency. They exhibit various features such as a vibration-damping function, ...

Torque: 0.4 Nm - 711 Nm

Tsubaki’s Jaw-Flex Coupling is an elastomer coupling that can also be used in servo applications. It is designed to transmit torque while damping system vibrations and accommodating misalignment. ...

Torque: 60 Nm - 405 Nm

The LN Series Jaw-Flex Coupling delivers more vibration damping than our existing products by employing new material for the spider. It also provides backlash-free torque transmission and superior shock ...

Torque: 12 Nm - 4,650 Nm

Description The coupling portfolios normally found on the market consist of comparable couplings with a maximum permissible torque corresponding to twice the coupling s nominal torque. ...

Torque: 0.5 Nm - 655 Nm
Rotational speed: 47,500 rpm

Torque: 40 Nm - 1,000,000 Nm
Rotational speed: 520 rpm - 5,000 rpm

MULTI MONT couplings have been built in series since 1958. This pluggable claw coupling that has been successfully proven over a number of decades has been permanently updated to the state of the art, ...

Torque: 10 Nm - 2,400 Nm
Rotational speed: 3,750 rpm - 19,000 rpm

... Torsionally flexible claw coupling with or without taper bush • compensate axial-, radial- and angular misalignments • absorb shocks and vibrations • fail safe and withstand high overloads • well suited as plug-in ...

Torque: 15,000 Nm
Rotational speed: 19,000 rpm

Spider couplings also known as jaw couplings, are torsionally flexible shaft couplings which enable the connection of shafts or flanges via a polyurethane ...

... torsional coupling needed for almost any application. LF torsional couplings Substantial shock, vibration and misalignment capabilities, maintenance free, fail-safe operation. Characteristics ...

Torque: 0.4 Nm - 712 Nm
Rotational speed: 4,200 rpm - 31,000 rpm

The Type L couplings are designed for medium to high speeds up to 31,000 rpm. These cost-effective units are available with 4 different insert materials and are compatible with industry Std. They are intended for applications ...

Torque: 5,300 Nm - 169,000 Nm
Rotational speed: 0 rpm - 3,385 rpm

Features - Nominal torques up to 169 000 Nm - Compensation of axial, radial and angular misalignments - Adsorbs vibrations - Progressive torsion spring properties due to primarily pressurised elastomer cushions - Fail-safe ...

Torque: 34 Nm - 21,000 Nm
Rotational speed: 2,750 rpm - 7,000 rpm

Features - Compensation of axial, radial and angular misalignments - Adsorbs vibrations - Progressive torsion spring properties due to primarily pressurised elastic elements - Fail-safe in the event of the failure of the ...

Torque: 160 Nm - 21,000 Nm
Rotational speed: 2,750 rpm - 5,300 rpm

... in the event of the failure of the elastic elements - Easy replacement of elastic elements without disassembly of the coupling halves - Maintenance free, no lubrication necessary - Elastic elements can be ...

Torque: 9.6 Nm - 3,430 Nm

... Symmetrical design allows for high running speeds without additional balancing - Fail-safe in the event of the failure of the spider - Maintenance free, no lubrication necessary - Declaration of conformity in accordance ...

Torque: 5,300 Nm - 169,000 Nm

Jaw Couplings with radially mountable elastomer cushions Features : - Nominal torques up to 169 000 Nm - Compensation of axial, radial and angular misalignments - Adsorbs vibrations - Progressive ...

Torque: 34 Nm - 7,000 Nm

Jaw Couplings with enclosed elastic elements Features : - Compensation of axial, radial and angular misalignments - Adsorbs vibrations - Progressive torsion spring properties due to primarily ...

The GS series is a line of couplings manufactured by Neff. This tool is a special anti-backlash shaft coupling with a toothed ring. This results in low surface pressure, and increased rigidity of the ...

Torque: 130 Nm - 35,000 Nm
Rotational speed: 15,000 rpm

The TSCHAN®-S S-BT coupling is a torsionally flexible, puncture proof claw coupling with brake drum or brake disk. It compensates for angular, radial and axial shaft misalignments within defined limits. ...

Torque: 130 Nm - 8,900 Nm
Rotational speed: 1,900 rpm - 7,250 rpm

The TSCHAN®-S SDD-5 coupling is a torsionally flexible, puncture proof claw coupling with removable intermediate part comprising the claw rings and the buffer ring. It compensates for angular, radial ...

Torque: 130 Nm - 8,900 Nm
Rotational speed: 1,900 rpm - 7,250 rpm

The TSCHAN®-S SDDL-5 coupling is a torsionally flexible, puncture proof claw coupling with removable intermediate part comprising the claw rings and the buffer ring. It compensates for angular, radial ...

Chinabase Machinery (Hangzhou) produces flexible coupling for fluid, tyre, chain, rotex (steeliness, cast material, DKM type), HRC, pin, MH, NM, spacer and jaw. Each coupling type has ...

Torque: 2 Nm - 1,050 Nm
Rotational speed: 4,500 rpm - 34,100 rpm

... response. The material of element is Polyurethane Elastomer, that realized 2 times of torque comparing with our present jaw type coupling. No backlash is possible due to the pre-pressured design of element ...

Torque: 0.5 Nm - 50 Nm
Rotational speed: 4,000 rpm - 18,000 rpm

The SPR FLEX series is a flexible jaw coupling developed by Miki Pulley. It comes with cushioning rubber (nitrile rubber) between the 2 hubs. Due to the simple development, the unit features easy inserting ...

Torque: 0 Nm - 130,000 Nm

Backlash free jaw spacer coupling «in alluminium» ``GAS/SG-AL`` Made of aluminum fully turned. Elastomer available in different hardness (see pages 25 and 29). Simple mounting thanks to the two piece ...

Rotational speed: 6,000 rpm - 12,000 rpm

Couplings made in high Aluminium quality and lightweight.

Torque: 1.1 Nm - 1,500 Nm
Rotational speed: 1,750 rpm - 10,000 rpm

Basic Series ( COUPLINGS WITH HUBS ) to assemble with bore and keyway. With the same spider size, different coupling models can be interchanged, as well as with other coupling ...

Torque: 7.2 Nm - 380 Nm
Rotational speed: 2,500 rpm - 6,000 rpm

Taper Lock System COUPLINGS. Series TC-TCI suitable for standardized Taper-Lock bushings to avoid the subsequent mechanization of the couplings. Available with or without Taper-Lock bushings.

Rotational speed: 50 rpm - 3,450 rpm

FC Series Insert 3-Jaw Type Couplings are available in Steel and are available precision machined bored or solid hubs. The FC Series coupling offers three types of inserts for different ...

Rotational speed: 100 rpm - 3,450 rpm

... Bost-Flex® Spider Ring (3-Jaw) Type Coupling is an economical 3 Jaw coupling. The spider ring urethane insert absorbs shock and vibration ...

The FA Series Multi-Jaw Type Coupling is an untreated steel coupling for use in light duty applications and require no lubrication. . Product Features Bore Sizes from 3/16" to 1/2" Complete ...

Torque: 5.6 Nm - 90 Nm

... series ES couplings are under initial tension no backlash shaft connections with hubs made of aluminium. The triple simple cardanic couplings are axially pluggable with easy blind assembly, so no time-consuming ...

Torque: 0.39 Nm - 712.14 Nm
Rotational speed: 0 rpm - 31,000 rpm

The Type-L Jaw Couplings by BROWNING® are particularly developed and fashioned for minimal-to-medium duty applicable functions. Its performance features, as well as its overall unit capabilities completely ...

Torque: 1.8 Nm - 64.6 Nm

... single coupling as long as they have the same outside diameter. Available in three durometers, the spider allows the user to tailor the jaw coupling's performance to ...

Torque: 60 Nm - 3,600 Nm
Rotational speed: 2,400 rpm - 6,000 rpm

Couplings strengthened, flexibility, strong resistance to means couples. Juboflex Flexible element: Precompressed natural rubber. Bonded metal reinforcing mountings. Precompression band (to be removed after installation). ...

Rotational speed: 1,000 rpm - 3,600 rpm

Jaw Couplings are available in ML & MS Hubs and Spiders.

Torque: 8 Nm - 25 Nm
Rotational speed: 19,000 rpm

The flexible curve jaw coupling series, manufactured by Reliance®, is utilized with a damping characteristic that is great as well as an alternative hardiness. It is designed with a hubs in aluminum alloy ...

Torque: 2.5 Nm - 3,220 Nm

Dual curvature flexible toothed couplings with steel hubes and polyamide sleeve.

Torque: 7.5 Nm - 5,700 Nm
Rotational speed: 800 rpm - 19,000 rpm

ATLANTA couplings - a necessary driving element for shaft-shaft-connection. ATLANTA offers an extensive range of various types of couplings for optimal solutions in this field. Simple slip-on claw couplings These ...

Torque: 0.7 Nm - 265 Nm
Rotational speed: 6,000 rpm - 45,000 rpm

... a coupling manufacturer, NBK succeeded in the field of precision miniature shaft couplings. Beginning with technology development for single-piece construction slit-type couplings, ...