DN: 0.5 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,000 °F
... This globe control valve features a 1/2" body with 150 lb ANSI raised face flanges. It is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially ...
Pressure: 0 bar - 400 bar
... etc. The By-Pass valve is controlled from the driver’s cab and makes it possible to provide oil to the vehicle’s hydraulic equipment when necessary. .. • Compact design for direct mounting on the pump’s connection ...
Sunfab Hydraulics
DN: 0.5 in - 8 in
... forged or cast. The 31/32 Series are Habonim’s line of one piece fully flanged reduced bore valves in ANSI Class 150 and ANSI Class 300. Habonim’s flanged valves offer tight shutoff, long service life and high durability ...
HABONIM
DN: 6, 14, 8, 10 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C
... FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The GHILUX miniature ballvaves have been created and engineered by Aignep in the 90’s. The supercompact dimensions and the excellent performance respond to the growing demand ...
AIGNEP
Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F
... Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or nitrogen control ...
DN: 15 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C
... In media-separated piston valves, a pivoted lever in conjunction with the membrane fitted on it ensures low-friction power transmission with high tightness. Due to the “lever arm effect”, only a small dimensioned pneumohydraulic ...
DN: 20 mm - 100 mm
Pressure: 3.5 bar - 6 bar
Temperature: 150 °C
... wide range of optional and fully customizable according to project requirements. Fully draining Minimized dead leg Compact body Small welding pad CIP/SIP cleanable/sterilizable No product entrapment Minimized diaphragm’s ...
AERRE INOX Srl
DN: 0.08 mm
Pressure: 1 MPa
Temperature: -40 °C - 70 °C
... The PV01 micro flow proportional valve is a small diameter product series of Keyto's proportional valve. With a 0.08mm internal flow path. The valve can be used for precise flow control from 0 to 650 ...
Keyto Fluid Technology
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... low flowrates of liquids and gases, MFV™ Barstock valves are available in six conveniently overlapping orifice-needle sizes. Offered in straight (T) and 90 degree (L) flow patterns, the MFV™ Barstock Valve includes a ...
DN: 2.5 in - 20 in
Pressure: 235 psi - 350 psi
Temperature: -10 °C - 130 °C
... ductile iron flow balance valve adopts low-resistance Y-shaped structure, the shell is coated with epoxy resin. Flow measuring fittings on both ends feature good self-sealing performance and easy adjustment. The highly precise valve ...
Taloar
DN: 0.125 in
Pressure: 25 psi - 125 psi
Temperature: -18 °C - 46 °C
... control valves are compact 1/8 ported 4-way valves that may be actuated by hand, remote air signal, electric signal, or mechanically by a machine element. LTV valves are ideal for powering ...
DN: 50 mm - 1,400 mm
Pressure: 20 bar - 420 bar
Temperature: -46 °C - 190 °C
... and improve profitability CAMERON T30 Series fully welded ball valves reduce the total cost of ownership by minimizing fugitive emissions, simplifying maintenance, and eliminating valve replacement or upgrading at ...
... Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, shuttle valves and counterbalance valves – all manufactured to NFPA and ANSI/ISO standards. Modular ...
DN: 25 mm - 1,200 mm
Pressure: 10 bar - 100 bar
... butterfly valve is also offered as an on/off valve, it features a “no maintenance required” design and offers superior tightness when closed. Its relatively small size and equally small prize point are ...
DN: 0.5 in
Pressure: 100 psi
Temperature: 180 °F
... The NIBCO® PEX mini ball valve is made of lead-free* Performance Bronze alloy. Because of its compact design, the mini ball valve is ideal for use in a NIBCO® PEX piping ...
... positions as control valve - Improved leak-tightness by interlocking system between gate and top traverse (sizes 700x700…1200x1200) - Integrated and chambered profiled seal - Seal between valve and wall mounted ...
DN: 20 mm - 110 mm
Pressure: 16 bar
Temperature: 10 °C - 60 °C
... Industrial Series Ball valve with pneumatic actuator made of anodized aluminum Rack and pinnion drive Fast maneuvering Valve position visualization NAMUR connection that allows the assembly of the solenoid ...
Cepex SER
DN: 16 µm - 250 µm
... A 5-port valve utilizing a soft spool and is environmentally resistant (unfiltered air) and compatible in a wide range of fields. [Compatible cylinder] Dia.6 to Dia.250 ...
CKD
DN: 25 mm - 150 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C
... Features •Face-to-face minimised due to sandwich design •Weight minimised through sandwich design •High reliability due to thick-walled PFA lining •Maintenance-free and adjustable stem sealing Specifications •Design - DIN/ISO ANSI/ISA-75.08.01 ...
DN: 40 mm - 300 mm
Pressure: 1 MPa
Temperature: 450, 150 °C
... cylinder rod drives the valve plate to move downward and the valve closes. When the air source enters from the lower intake port, the cylinder rod drives the valve plate to move upward and the valve ...
Zhejiang Gute Pneumatic Machinery Co., Ltd
DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C
... powered mass flow meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves ...
DN: 0.125, 0.25 in
Pressure: 10 bar
Temperature: -10 °C - 90 °C
... This product is used for water distribution and can cope with a minimum temperature of 10°C, maximum temperature of + 90°C and maximum pressure of 16 bars. It has a black nylon handle and has ring on the stem. It bore 0 5.5 mm. SPECIFICATIONS : • ...
Pressure: 60 psi - 100 psi
... Positive Displacement Dispense Valve with Microdispense Nozzle Outlet The MV250 Positive Displacement Valve is a true positive displacement metering valve capable of dispensing small ...
PVA
Pressure: 3 bar - 75 bar
... very small quantities Short cycle times Exactly reproducible dosing quantity Longer service life due to low-maintenance seals Application The mini dosing valve enables spot application ...
Dosier- und Prüftechnik GmbH
DN: 0.375, 0.5 in
Pressure: 0 bar - 5 bar
Temperature: 0 °C - 70 °C
... The PVA compact float valve series 480 stands out for its compact and simple design, specifically engineered for shallow channels and tanks. With its integrated float body and complete construction from ...
PVA Schwimmerventile GmbH
the best suppliers