... • Machine body made from large thickness powder coated steel • bowl protection made from metal wire • easy to remove bowl made from stainless steel 304 • safety microswitches for the lid and the bowl • 3 easy to remove metal tools: aluminium spatula ...
... Agitators (or mixers) are necessary for mixing powdered substances or liquids in water in the areas where recipes are prepared. Normally these are cylindrical tanks in which the mixer ...
Engine power: 1.1 kW
Empty weight: 50 kg
... Pneumatic mixer with twist valve Pneumatic mixer, for all mixing work with two speed ranges and twist throttle. Energy source: Pneumatic Operating pressure: 6 bar Actuation: Twist throttle ...
Engine power: 1.1 kW
Empty weight: 50 kg
... Pneumatic mixer with lever valve Universally usable pneumatic mixer, as well for explosive areas, equipment group I, category M2. Energy source: Pneumatic Operating pressure: 6 bar Actuation: Twist throttle Underground ...
... custom designed and blender components selected to meet the constraints of your operations, whether they are to design a completely new blender with maximum throughput and minimum pressure loss or to design and retro-fit ...
Engine power: 4, 0.75 kW
Capacity: 75, 24, 12 l
... >
Models available
- LCM-12
- LCM-24
- LCM-75
Technical table
Mixer model | Mixer bowl volume (L) | Impeller speed (rpm) | Motor power (kW)
LCM-12 | 12 | 400 | ...
Labtech Engineering Co., Ltd.
... high reproducibility and facilitate scale up the control of mixing and temperature is essential, particularly for highly exothermic or fast, mixing-dependent reactions. Uniqsis glass static mixer/reactor blocks produce ...
Empty weight: 4.7 kg
... Two speed modes for a wide range of materials such as paint, stucco, mortar or levelling mortar Constant electronic for stable rotation speed even under high loads Protection of main body, battery and switch from dust and splash water for reduced cleaning ...
The malaxing group is composed of one or two vertical malaxing units; the SINTESI 500 model only can be equipped with three malaxers. All of them are provided with an electric valve for paste inlet and of a PSS_1 pump for transfer to the decanter. Temperature ...
Mori-Tem
Engine power: 1,010 W
... switch - for a controlled run-up to the optimum mixing speed. Sustained power in all speed ranges On/off switch with lock and protection at power interruption. Ideal for stationary operation in a mixing station ...
Capacity: 5 l - 20 l
Empty weight: 4 kg - 114 kg
Designed complying with FDA rules for pharmaceutical and biotechnology industries. The major advantage is that enables the total integrity of the tank. The transmission with magnetic torque avoids the occurrence of cross contamination between product ...
AERRE INOX Srl
Engine power: 45 kW - 160 kW
Flow: 4,300 l/h - 26,500 l/h
... intake (CL) or paddle intake (SL) Mixing chamber is manufactured with wear-resistant material, highly wear-resistant coating option available Mixing chamber, mixing tools and discharge flap are ...
Engine power: 0.75 kW - 18.5 kW
... Vertical 2-axis system offering uniform vacuum mixing♪ (1)3-bag mixer can operate with just 20 kg Achieves uniform mixing with loads from 20 kg to 75 kg. (2)Eliminates poor mixing at mixer ...
... HPLC mixer, up to 414 bar, 1500 µl mixing volume Eluent mixing Recommended flow rate : 1.0 - 40.0 ml/min Mixing volume : 1500 µl Pressure rating : max. 414 bar (41 MPa, 6000 psi) Wetted ...
... Closed paint mixer and shaker – SAMS763-4 Closed paint mixer and shaker is composed by a working chamber, where a container with the sample to be tested is placed and fixed trough a special clamping device. The ...
... Submersible mixers used for mixing, homogenising and agitating heavy slurries and liquids containing solid particles and for removing bottom deposits. Submersible mixers used for mixing, homogenising and agitating heavy ...
Engine power: 10, 5.5, 25, 50, 4 kW
Flow: 300, 1,200, 500, 2,500 m³/h
Empty weight: 500, 3,000, 5,000, 750, 1,000 kg
The “compact” Centricoater series is designed for easy installation at the customer’s site. Each Centricoater is pre-wired from the factory and delivered pre-tested. After connecting the grain pipes (for filling and discharging), main electric power supply, ...
... Mixers are designed to mix a wide variety of free-flowing materials. Four different types of mixers are offered. The drum mixer is used for gentle mixing and is perfect to preserve ...
... Overview This static mixer is designed for resin-casting processes where slow, controlled casting is required to prevent air entrapment while achieving the highest possible fluidity. It is supplied for integration in new resin-casting ...
Flow: 600 l/h - 5,900 l/h
Empty weight: 7 kg
... The ADCAMix MX20 is a series of steam-water mixers designed to provide a cheap and instantaneous source of low pressure hot water, by using existing steam and cold water supplies. The mixer incorporates a safety device, ...
... Mixer heating block, that is the sample kneading part of Labo Plastomill, contains 2 kneading blades rotating in same direction or two kneading blades rotating in different directions and resin temperature sensors. Mixing ...
Engine power: 1,220, 1,600 W
Capacity: 80, 120 l
... - Transport box for mixer 1600W. - Mixing road included: Model 1200W Ø 120 mm and Model 1600W Ø 160 mm. - For Model 1600W, Selector 2 speeds to use in different applications. ...
... Ash mixers of the VM MX series are ideal to mix and homogenize powders coming from dry materials. These machine are easy to use and the process can be used for granular products as well. This process allows to take samples for analysis ...
... accurate ingredients’ weight measurement Combined paddles and ribbons rotation to facilitate mixer’s dumping Mixer capacity: 600lb Mixing speed up to 45 RPM ...
Empty weight: 160 kg
... with 6 fuel channels, for blending octane and cetane reference and check fuels composed of four blending components: iso-octane, normal heptane, 80/20 blend and toluene for octane and two blending components ...
... Item Model Number : MD13 Motor : Brush Motor Wattage : 850W Voltage : 115-120V; 220-230V Maximum Blade Speed : 780RPM Weight : 10Ibs Country of Origin: Taiwan ...
the best suppliers