Pedals

... high degree of stability of the one cable entry M 20 x 1.5 Schmersal TFH32 foot switch makes this a good choice. The unit has a wide opening with a protective shield and a pedal that is lower in height ...

The T2FH 232 is a double-pedal type of foot switch that has 2 M25 cable entries. It is considered to be a very strong and stable foot switch. Adding to its durability is a protective shield with wide ...

... plastic KF range switches include use in the electro-medical area, on textile machinery and laboratory apparatus. All the foot pedals have multiple versions for range of choice. GFS range switches are mounted with a shield ...

Loctite 97201 Loctite 97201 Dispensing - Footswitch

These basic enclosures are of similar dimensions except for its width that come in the variance of one, two and three pedals.

The aluminium pressure die-cast protective shroud (F3: aluminium sand casting) fully shields the pedal at the top and sides while the wide base provides a high degree of stability. It reliably prevents accidental operation ...

... which is suitable for various applications in the industry. The way this device works is by preventing the operation of the pedals until the shroud has been raised. Protection against falling objects and other similar ...

Two metal cased foot switches with SPDT contacts Latching and non-latching versions Rated 250Vac/30Vdc at 3 A Incorporates non-slip base pad and footpad With 2m cable Sealed to IP40 or IP67

Light Duty Foot Switch, Polymer Momentary SPDT 15 A @ 250 V ac 250V IP20 Contact rating 12 A to 16A, 125-250Vac Rust and corrosion proof reinforced polymeric construction for arduous use Non-skid base pad Rated to IP20

RS Pro single pole versatile foot switch with a durable steel housing for long life and high reliability. The foot switches have a low profile that helps eliminate operator fatigue, with only a small ...

... 526 (from the William's Controls product brand) Electronic Floor Pedal is designed for all commercial vehicle applications and is highly customizable. This versatile Electronic Floor Pedal is equipped ...

... sensor on the rocker pedal to achieve a highly accurate output. The sensor provides a ratiometric signal that is interpreted by the vehicle controller. The electronics are IP67 sealed and highly EMC resistant. The Hall ...

... use in rugged industrial applications. This pedal is ideal for the material handling industry, sweeper industry and other industrial applications where severe conditions exist and drive-by-wire pedal ...

Product code/s IP7011 Foot switch with pedal latching device and without trigger mechanism. IP7011 > 1NO Colour: Yellow PANTONE 102C Features SeriesFOOT SWITCHES, Single footAutomation ...

Product code/s IP7007IP7008IP7007IIP7009IP7015 Foot switch with trigger mechanism requiring positive action to allow pedal operation. IP7007 > 1NO IP7008 > 2NO IP7007I > 1NO+1NC IP7009 > 1NO IP7015 ...

Product code/s IP7007IP7008IP7007IIP7009IP7015 Foot switch with trigger mechanism requiring positive action to allow pedal operation. IP7007 > 1NO IP7008 > 2NO IP7007I > 1NO+1NC IP7009 > 1NO IP7015 ...

The foot switch is ideal to be used in applications where an operator needs to start a test with “hands off” the instrument.

- Powder-coated aluminium housing - Protection rating IP42 or IP56 - Actuator with deep ribbing - Sturdy flange plate - Options: Metal cable screw connection - Use in industrial applications - Version FST, FPS, FPW with stable metal ...

- Analog with optional contacts with reset - Powder-coated aluminum housing - Protection rating IP54 - Ergonomically ribbed aluminum step plate with heel edge for foot positioning - Simple, stable mounting - Options: Metal cable ...

- Maximum 4-step output or analog with reset - Powder-coated aluminum housing - Protection rating IP42 - Large, ergonomically ribbed aluminum step plate with heel edge for foot positioning - Simple, stable mounting - Options: Metal ...

Pedal switches are available in light-weight and durable metal housing. They are maneuvered by a red anti-slip rigged pedal that covers the entire push button. Also incorporated in the design are protective ...

Schaltbau S293 Series dead-man foot switches feature a high actuating speed, a compact design, and a high service life. The dead-man foot switches are designed for use under rough operating conditions, ...

... of application for our foot switch is the driver‘s desk of rail vehicles such as locomotives, multiple-unit trains and driving trailers. The foot switch is also suitable as a driver‘s safety device ...

The Pedal-Controller P10/P11/P12 is a rugged switching device for electro-hydraulic. The modular design enables the switching device to be used universally. The P10/P11/P12 is resistant to oil, maritime, climate, ozone ...

The Pedal-Controller P20 is a rugged switching device for electro-hydraulic. The modular design enables the switching device to be used universally. Technical data Mechanical life P20 10 ...

The Pedal-Controller P7 and PP7 is a rugged switching devices for footing applications. The Pedal-Controller is resistant to oil, maritime conditions e.g. offshore /vessels, UV radiation typically from ...

... Switch Supplied with a 10 foot 1/8" ID reinforced PVC tubing connecting the foot pedal to the remote air switch The tubing is connected at the foot switch end using a molded on strain relief ...

... Switch Supplied with a 10 foot 1/8" ID reinforced PVC tubing connecting the foot pedal to the remote air switch The tubing is connected at the foot switch end using a molded on strain relief ...

Long Treadle Throw Desgin Nonskid Base Pad Designed for long life operation Two-Way models do not exhaust back pressure Plunger can be depressed flush with valve body without damage to valve Standard 1/8-27 ...

category：Potentiometer-type Features：Conductive Plastic Heavy High reliability

category：Hall Effect-type Features：Long life Contactless potentiometer Special Specifications Available - With switch incorporated D version switch: SW "ON" at about 3° from the beginning of stepping under 1V±0.3V.D.C. output. F ...

category：Hall Effect-type Features：Hall effect IC Type Low-cost Vibration environment

MO 126 Accelerator Pedal Engines: Suitable for different engine interfaces Technology: Contactless measuring principle Output: Single or Double full redundant programmable outputs Single / Dual Analog type ...

MO 129L Accelerator Pedal Engines: Suitable for different engine interfaces Technology: Contactless measuring principle Output: Single or Double full redundant programmable outputs Single / Dual Analog type ...

MO 129S Accelerator Pedal Engines: Suitable for different engine interfaces Technology: Contactless measuring principle Output: Single or Double full redundant programmable outputs Single / Dual Analog type ...

The foot switches can be two positions (grey or red) or three positions

The industrial-rated 1025 Foot and Palm Switches – are designed for use in situations where the operator needs to have both their hands free for other tasks or for situations where there is a need for a switch that is highly visible so ...

... springs BEST USES • Accelerator pedal for electronically controlled diesel engines subjected to emission standards from Stage IIIB on. • Accelerator pedal for electrically-driven vehicles • ...

... springs BEST USES • Accelerator pedal for electronically controlled diesel engines subjected to emission standards from Stage IIIB on. • Accelerator pedal for electrically-driven vehicles • ...

... springs BEST USES • Accelerator pedal for electronically controlled diesel engines subjected to emission standards from Stage IIIB on. • Accelerator pedal for electrically-driven vehicles • ...

This footswitch is ideal for use with stationary equipment. Pressing the switch in stationary mode dispenses the glue melted during operation.

... technical features include all contacts' positive opening operation and a pressure point element integrated under the pedal, which when the pedal is sharply pushed down triggers an immediate stop of the ...

Hydraulic proportional foot operated pedals; available 4 design options with single or double outlet pilot port; max. inlet pressure 100 bar; max reduced pressure 60 bar; inlet flow from 5 up to 15 l/min; ...

Electric proportional foot operated pedal, robust and reliable for heavy duty applications; Hall effect system with sensors at IP68S protection class; 2 design options single and twin channels; analog ...