Plastic pumps

Flow: 12 m³/h - 118 m³/h
Pressure: 31 bar

... slurries Details: High viscosity High pressure Runs dry without damage High temperature High vacuum External bearing chamber Shaft seals available Externally timed gears ...

Flow: 1,181 l/h
Pressure: 12 bar

... metering pump, also known as the MACROY® pump, is now NSF/ANSI 61 and 372 certified for municipal compliance and safety assurance. Capable of handling pressures up to 175 psi (12 bar) and flow rates ...

Flow: 4 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Weight: 2.9 kg

... 100% Level probe input Acid resistant plastic box IP65 protetction degree Wall or horizontal basement mounting Standard pump head: in PP or PVDF, diaphragm in ...

Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m

Plastic Lined Horizontal - Single Stage - Centrifugal pump with Mechanical Seal Lining: PP (Polypropylene) Long-coupled and Close-coupled executions Versatility: Suitable for handling ...

Flow: 200 m³/h
Pressure: 10 bar
Head: 70 m

Compact and economical – the alternative to standardized pumps Close-coupled pumps MUNSCH close-coupled pumps provide many users with a compact and ...

Flow: 0 m³/h - 95 m³/h
Head: 57, 26 m
Power: 3 kW

... fuel efficiency Wet-Prime Plastic Pump The Godwin GPL-50HX is a portable, gasoline-powered pump ideal for agricultural chemicals, general dewatering, landscaping, irrigation, saltwater ...

Flow: 4, 2 m³/h
Head: 14 m - 40 m
Power: 0.37 kW - 1.1 kW

Thermal protector：single phase Insulation：F ☆The impeller and middle section are high-strength engineering plastic,It's economy-oriented comparing with CMF,which is designed for domestic supply system.

Flow: 30 l/h - 6,000 l/h
Pressure: 0 bar - 250 bar
Power: 1.5 kW - 5.5 kW

... pressure gauge • Check valves double ball or cone depending on pump size • Connections: NPT (metallic) or flange (plastic) • Liquid-wetted material available as 316L type or plastic • ...

Flow: 100 l/min - 600 l/min
Head: 5.5 m - 42 m
Power: 0.4 kW - 3.7 kW

... be reduced effectively. Thus, thermal deformation and melt are prevented. Non contact system Unlike conventional magnetic drive pumps, the MXM series are designed to prevent contact between the ...

Pressure: 60 psi

... Lubricator includes a spring return piston pump in a plastic reservoir. Pulling up slowly on the lever handle to the stop fi lls the cylinder with a predetermined volume of oil. Upon release, spring ...

Flow: 150 m³/h
Pressure: 6 bar
Head: 60 m

... magnetic drive pumps type PEM Construction Single-stage horizontal centrifugal PEM pumps. Monobloc version or standardized version. Magnetic coupling with absolute tightness. Samarium cobalt magnets. Our ...

Flow: 350 l/h
Head: 4 m
Power: 50 kW

... overflow protection through capacitive sensors Pump encapsulated and fluid-cooled Protection class IP 55 Max. medium temperature Compact, space-saving construction Pump housing made from high-quality ...

Flow: 45, 20 l/min
Pressure: 0 Pa - 500,000 Pa

... these an excellent choice forUltra high purity chemical process and CMP slurry applications.Together with the CE-124 Pump Driver, this pump has unparalleledstart stop operation control, reliability and ...

Flow: 0 m³/h - 40 m³/h
Head: 0 m - 20 m
Power: 2.2 kW

This pump consolidates the tried-and-true plastic packaging of the BADU 90/40 with the exceptionally proficient class IE3 permanent magnet engine and ingenious engine controls. This pump ...

Flow: 0.14, 0.43 m³/min
Pressure: 1.03, 8.62 bar

... Include a hand lever attachment for manual operation which can be factory fitted or retrofitted later, ideal for locations without an air supply or where precision pressure control is required. When ...

Flow: 38 l/min
Power: 250 W
Length: 132 mm

Electric centrifugal pump with high-quality, impact-resistant plastic housing. Description For diesel, heating oil EL/L, radiator antifreeze (concentrate), GTL, HVO and R33 Self-priming with integrated ...

Flow: 0 l/min - 16 l/min
Pressure: 0 bar - 8.4 bar
Head: 0 m - 84 m

Flow: 8 l/min

50820 RIO 100 Single-action hand-operated oil and antifreeze pump. Standard equipment: rigid filling pipe, plastic ring nut for drums and Viton gaskets.

Flow: 10 m³/h - 400 m³/h
Pressure: 16 bar
Head: 5 m - 110 m

... centrifugal pumps. • Main pump dimensions are compatible with DIN 24256 (ISO 2858). • Single entry, closed type impeller is used. • Radial vanes are used behind the impellers to lower the pressure and ...

Flow: 5 l/min - 900 l/min
Power: 120 W

... facilitating and minimizing interventions The materials used for the construction of magnetic drive pumps are the source: • PP for special plastic material. • Ceramic (Alumina ...

Flow: 50 m³/h - 8,000 m³/h
Head: 0 m - 140 m
Fluid temperature: 80 °C

ASP1070 series slurry pump is single shell sanlian company combining domestic and foreign technology, independent research and development of high efficiency, energy saving products, with light weight, small ...

Flow: 0.0014 l/min - 0.053 l/min
Power: 40 W
Input diameter: 4.7 mm - 29.1 mm

syringe pump system is four-channel micro syringe pump. The pump could hold glass or plastic syringes from 5ul to 60ml. The features of accurate distance ...

Flow: 0 l/min - 57 l/min
Head: 0 m - 39 m
Power: 0.37 kW - 0.75 kW

These are High Head Pump with better discharge. Noryl Impeller with High Grade Engineering Plastic). Aluminium die cast body with excellent asthetic & colour. Light weight for easy handling. Fitted ...

Flow: 6 m³/h
Head: 7 m
Power: 0.75 ch

centrifugal pump with mechanical seal are made of plastic materials (Polypropylene and PVDF) and are suitable for high corrosive liquids. They are operated by a direct-drive motor (max 3000 rpm). Their ...

Flow: 10 m³/h - 100 m³/h
Power: 1.5 kW - 7.5 kW

QK series cutting sewage pump is make up of three parts: water pump, sealing box and motor. At the top of the pump is the motor. Use cement alloys mechanical sealing to connect pump ...