Flow: 0.0001 l/min - 1 l/min
Pressure: 15 MPa
Width: 276 mm
... benefits Durability – The pump is constructed for high pressure and flow rates. This makes it suitable for day-to-day long-term use in production Wide application possibilities – The unit is ...
ECOM
Flow: 12 m³/h - 78 m³/h
Head: 700 m
Power: 0.55 kW - 55 kW
... Product overview
Multistage deep well
pumps of the Z6 and ZN6 series are designed to
pump clean or slightly sandy water (maximum sand content 1050 g/m³). The
pumps are made for 6″ well casings ...
Proffico sp. z o.o.
... servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high viscosity to paste, high filling ...
Flow: 220 l/min
Pressure: 310 bar
Input diameter: 275 mm - 400 mm
... Description
Our drum
pump AP200-56-1 enables the transfer of adhesives and sealants. It can be used to supply one or more dispensing workstations or dispensing systems, as well as for
filling cartridges. This allows ...
Flow: 56 l/min
Power: 220 W
... EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose from 6 to 10 m - available: extra ...
Eurial
Flow: 0 l/min - 1.14 l/min
Pressure: 50 bar - 150 bar
Fluid temperature: 10 °C - 40 °C
... Advantages Our barrel pumps are characterized by high product quality, reliability and long service life. Application of high pressure barrel pumps with follower plate ensures optimal ...
Dosier- und Prüftechnik GmbH
Flow: 1 m³/h - 150 m³/h
Pressure: 0.1 bar - 5 bar
Power: 0.37 kW - 11 kW
... Acid pumps are specially designed to safely transport corrosive and chemical liquids. These pumps provide durability and reliable performance in highly acidic environments, playing a critical role in industrial ...
Flow: 80 m³/h - 1,500 m³/h
Length: 98 mm - 918 mm
Width: 70 mm - 120 mm
... which is already suitable for a large part of the applications, a large proportion of the pumps are also available in ECTFE. All sizes are available with hose or thread connections. The ...
Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW
... carried out on-site without the need to remove the pump from its installation. This significantly reduces downtime and optimizes the productivity of industrial operations. The PCM EcoMoineau™ MX pump ...
PCM
... evaporators) and Large (for 6 – 7 evaporators) Stainless steel construction for evaporator pump impellers, fasteners and water fittings Industrial evaporator pump motors ...
CoolMist Systems Australia
Flow: 4, 8, 16 m³/h
Pressure: 16, 21, 23 bar
Power: 0.37 kW - 18.5 kW
... series pumps are efficient operation, low noise, compact structure, light weight, easy to service, good seal performance etc. Its high head low-capacity performance range makes it especially suitable for use as a pressure ...
Flow: 260 m³/h
Input diameter: 150 mm
Output diameter: 150 mm
... LOWMOTION 6 is a 6’’ industrial pump (⌀150mm). LOWMOTION 6 obtains optimal hydraulic characteristics thanks to its rotor. Its capacities and reduced speed guarantee an anti-clogging power. Low speed Lowmotion ...
FAIVRE
Flow: 0.1 l/min - 2,400 l/min
Fluid temperature: -30 °C - 150 °C
... calls for reliable components. Whether in lubrication oil applications or in processing plants, a pump is required to work reliably and longlasting. Thanks to the extensive range of components and pump ...
Maag Germany GmbH
Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
... The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors due to their ...
Anglada Pumps
Flow: 350 us gal/min
Head: 0'00" ft - 100'00"
Power: 4.5 ch - 7.5 ch
... BEARINGS The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive. POWER CABLE Waterproof/oil proof, rubber-insulated, ...
Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m
... chemical, desalination power station, fertilizer, pulp and paper, offshore platform and general industrial applications, especially suitable for inlet high pressure conditions. ...
Flow: 30 l/min
Pressure: 0 bar - 6 bar
... 30 L Double Membrane Pump. Medium production. For finish and primers. High precision product regulator. Anti-pulsation system and double paint filter. Lacquers, clearcoats, basecoats, enamels. Medium ...
Flow: 0 m³/h - 18 m³/h
Head: 12.5 m - 56 m
Power: 0.37 kW - 4 kW
... MOTOR-DRIVEN, SINGLE IMPELLER PUMPS, WITH AXIAL INTAKE AND RADIAL DELIVERY ARE PARTICULARLY SUITED FOR USE IN INDUSTRIAL, CIVIL AND AGRICULTURAL APPLICATIONS, AS WELL AS IN HEATING AND ...
Flow: 100 l/min - 5,500 l/min
Pressure: 10 bar
Head: 14 m - 45.1 m
... Monobloc horizontal centrifugal pump, constructed in compliance with EN 733 standards; widely used in water supplies, pressurisation and fire-fighting systems, cooling, heating, irrigation, industrial and agricultural ...
Pentax Pumps
Flow: 0 m³/h - 21 m³/h
Head: 10.5 m - 744 m
Power: 3 kW - 55 kW
... The FPS 6" SR Series water pumps were designed specifically for municipal and industrial applications where high grade stainless steel is required. These pumps contain stainless steel ...
Franklin Electric
Flow: 55, 70 l/min
Pressure: 8 bar
Head: 0 m - 70 m
... 1/2'' (12.7 mm) Alumınıum Body Dıaphragm Pump Maximum Capacity : 55 lt/min Fluid Inlet-Outlet : 1/2'' NPT Max. Fluid Outlet Pressure : 8 Bar Housing Material : Aluminium Center Section Material : Polypropylene Diaphragm Material ...
Flow: 30 m³/h
Pressure: 54 bar - 180 bar
... kind of pump is the correct choice for industrial applications. The KLEIN Industrial Pump is used for the following difficult sludge and slurry applications: • ...
Flow: 0 l/min - 420 l/min
Pressure: 10 bar
Head: 4 m - 28 m
... non-aggressive liquids charged with small solid impurities. To be used in flow irrigation system in gardening, agriculture and industrial fittings. Pumps should be installed in ...
Flow: 0 us gal/min - 8,000 us gal/min
Head: 0 m - 256 m
... Hybrid Pumps Cornell Pump hybrid pumps are able to handle dirty water and viscous slurries. They can handle small solids and high operating pressures for up to 800′ of head. Hybrid ...
Cornell Pump
Flow: 0.5 l/min - 180 l/min
Pressure: 30 bar - 480 bar
Fluid temperature: min -29.0 °C
... and tested pump design is provided for this application, this prevents vapour bubbles from remaining in the pump preventing seal damage. Special seals are used to handle the low lubrication and low temperature ...
Three Es
Pressure: 350, 420 bar
... by Danfoss medium-pressure axial piston pump, engineered to deliver a new level of efficiency, performance, and system flexibility. Designed to meet the evolving needs of industrial machinery, the new PVMX pump ...
Flow: 0.8 l/min
Pressure: 430 mbar
Fluid temperature: -20 °C - 50 °C
... power, small size, and light weight play a critical role in portable gas detection and medical applications. The T2-05 pump HE and LI pump models enable ...
... construction of the filter unit are a guarantee of durability and degree of high filtration (< 1 ) of OMG Filter Pumps. All the components of unit pumps are produced by turning and milling polypropylene, and 316L stainless ...
Flow: 20 l/h - 1,000 l/h
Pressure: 0.2 bar - 8 bar
... pumping an additive into a water line at a consistent induction rate over varying water pressure and flow rates. Especially compact pump generates high injection accuracy and very low flow rate. Comments MixRite's main ...
TEFEN
Pressure: 220 bar - 315 bar
Fluid temperature: -15 °C - 80 °C
Weight: 3.4 kg - 3.7 kg
... effect modular hand pumps to guarantee the flow in both lever movements. Ikron EP hand pumps offer a double-acting operation providing flow in both lever movement directions. The ...
the best suppliers