Test benches

... This manual test stand is ideal for tensile testing, compression testing, peel, and flexural testing. It may be equipped with a quick-action lever or precision hand wheel for controlling crosshead ...

... The MT Series is a manual test stand for force measurement applications up to 500 lbf (2.5 kN) capacities. The test stand can be bench mounted, wall mounted, or positioned ...

... The motorized TCM Series force testers feature a small footprint while retaining ample clearance for large samples. With an ideal 100 mm (3.9 in) throat clearance, testing of large samples is no longer a limitation. The universal adapter plate with International ...

... needed to accurately and efficiently test miniature motors and micro motors is included with the purchase of a Magtrol Micro Dyne. The only component that needs to be supplied by the customer is a laptop or desktop personal ...

... Eddy-Current induced on an aluminum disc directly mounted on the DUT (Device Under Test) shaft. Torque is measured frictionless by a Reaction Torque Sensor mounted under the test bench surface. Due ...

... With the ability to bring the motor under test (MUT) to synchronous RPM before beginning a test, repeatability is improved. Since the motor windings are at ambient temperature before starting a ramp test, ...

... hours autonomy • Programmable leak test • Programmable flight envelope to protect equipment under test • Most important flight values displayed simultaneously • Programmable (password write protected) test ...

... designed to test aircraft pitot and static systems for leaks as well as the operation and calibration of airspeed, altimeter, engine pressure ratio, manifold pressure indicators, and other vacuum or low-pressure units. The Air Data ...

... compliant • Programmable leak test • Programmable flight envelope to protect • equipment under test • Most important flight values displayed • simultaneously • Programmable (password write protected) • test ...

... independent tests on up to five (5) separate specimens using a single load frame. Based on our standard 68TM-30 testing frame (30 kN capacity)*, this system is especially suitable when test times are lengthened due to ...

... prior to initiation of the test Effective Automatic Cutter Get accurate results when performing method A tests with our motorized cutter. Cutting time repeatability is within 0.01 s Test Masses Easy ...

... allows rapid removal prior to initiation of the test Effective Automatic Cutter Get accurate results when performing method A tests with our motorized cutter. Cutting time repeatability is within 0.01 s Test ...

... • Peeling test / tension test of the welding seam • Enables ideal setting of the welding machine ...

... 13679 and ISO 12835 test methods. The latest test rig from PINETTE PEI has a force of 30,000 kN (6.7 Mlf) and can apply a bending force of up to 10,000 kN / m (160° / 100 ft). This range of high-pressure, ...

... PINETTE PEI has developed a dynamic test bench for validation and qualification of the hydrogen, oxygen and liquid helium supply line disconnection system for Ariane 5. This machine can simulate real launch conditions, ...

... Static test benches for testing launch vehicle components - Military applications PINETTE PEI provides static test benches used to control launch vehicle parts and structures by applying tensile, compressive and flexural ...

... even more expensive than the ancreation of a test stand. So why take unnecessary risks? By checking your quality switch you in the future even the smallest risk. With the P 160 or P 160 Ecoline workshop test stands, the ...

... resulting in high costs – often higher than the price of a test bench. Why take a risk that can be easily avoided? By testing the quality of your products, you opt for safety. The P 180 workshop test ...

... Hydrostatic pressure test stand - P 250 The P 250 Test Bench with Control C.2 IPC is a new modular test bench that can be adapted to your needs. It ...

... compressed gas cans with the corresponding test gases (1 vol.% - 2.2 vol.% - 100 vol.%) To the test station. However, if you are using several gases continuously, we recommend purchasing one of the larger test ...

... Suitable for upto 1 liter alu-can. Test-gas: 10ppm, 1 Vol.%, 2,2 Vol.%, 100 Vol.% or CO2 Technical Connectionhoses Flow-indicators Adjustable needlevalves Manometer Without Stand ...

... (without carpet probe test plate) (with carpet probe test plate) Suitable for upto 2x1 liter alu-can. Test-gas: 10ppm, 1 Vol.%, 2,2 Vol.%, 100 Vol.% or CO2 Technical Connectionhoses Flow-indicators ...

... The Test Center is available to any PICVISA customer to carry out their own tests - INDUSTRIAL SCALE PICVISA’s testing facility, which is 800m2, is an industrial-scale testing lab for the recovering of waste and for ...

... The compact ES05 test stand is designed for compression testing of up to 30 lbF (150 N). Typical applications include switch contact activation testing, small spring testing, peel testing, and more. A spring-loaded lever ...

... The ES10 and ES20 manual test stands are compact and economical solutions for compression and tensile testing of small samples. Choose between a lever (ES10) for quick-action testing or a hand wheel (ES20) for more precise ...

... The ES30 Force Measurement Test Stand is a versatile and economical solution for most compression and tensile testing applications. It can accept a wide variety of sample shapes and sizes and can be configured in many ...

... speed, whilst gripping the sample in a uniform manner, the motorised MultiTest-dV significantly enhances the repeatability of test results. Operators can perform routine batch testing with excellent throughput, minimising testing time, ...

... speed, whilst gripping the sample in a uniform manner, the motorised MultiTest-dV significantly enhances the repeatability of test results. Operators can perform routine batch testing with excellent throughput, minimising testing time, ...

... speed, whilst gripping the sample in a uniform manner, the motorised MultiTest-dV significantly enhances the repeatability of test results. Operators can perform routine batch testing with excellent throughput, minimising testing time, ...

... and according to all common international test standards. The heavy constructed clamping system enables full body testing and seat testing with the outlet flange open for inspection. This Versatile test bench ...

... for testing Shut-off valves, in horizontal position. This test bench features a proportionally controlled clamping system for full body and seat testing, according to all common international test standards. ...

... and according to all common international test standards. The heavy constructed clamping system enables full body testing and seat testing with the outlet flange open for inspection. This Versatile test bench ...

... This bench-top, manually operated, force-measurement test stand is used for pressuring soft sample materials during testing. It furnishes both precise pressure and displacement monitoring. The manual ...

... Didactic rig for materials resistance Conceived for the educational and demonstration approach of knowledge learnt during Materials Resistance and structure calculus classes. Developped for teaching, the BED 100 allows to apply controled sollicitations ...

...

• Static, fatigue and stiffness tests on front forks
• Static, fatigue and stiffness tests on frames
• Static, fatigue and stiffness tests on seat posts
• Static, fatigue and stiffness

... UHV-316 Motor Test Bench

Product overview:
The UHV-316 motor test bench is a custom, non‑standard test system compliant with relevant national ...

... Comprehensive Test Bench is designed for factory inspection and quality control of single-phase and three-phase asynchronous motors in the 0.12–11 kW range. The bench integrates a variable-frequency test ...

... >
The UHV-316C comprehensive motor test bench is designed for factory inspection of single-phase and three-phase small and medium-sized asynchronous motors. The bench includes a built-in variable-frequency ...

... emergency stop button, eliminating lengthy training typical of similar test stands. With four modes of operation (manual, jog, single cycle, continuous) various single tests or repetitive tests can be ...

... adjustable speed provides for slow tests or quick cycle load testing. The simple keypad combined with the intuitive on screen operation guides the user through setting up each test. Users can perform standard tests ...

... and a Tensile Frame adapter kit which enables extended clearance for tensile tests. NIDEC-SHIMPO offers a variety of grips and fixtures to create the required set-up for your test parameters. The FGS-250W’s maximum 250 ...

... Overview
The IJM-10KN-D1200 two-column test bench is engineered for demanding tensile and compression tests in both laboratories and industrial environments. It delivers precise, repeatable ...

... Description
The IJM-3KN-D1200 single-column test bench is designed for tensile and compression testing. It provides precise, reliable measurement suitable for laboratories and quality control. Its robust and ...

... It can realize mechanical tests such as tension, compression, tension-tension, compression-compression and tension-compression, as well as high-cycle fatigue, lowcycle fatigue, crack growth, fracture toughness and other tests, ...

... • JIS D203 • IEC 60598-1 • LV 124 • GS 95003-4 • NEMA 250 You would rather expand a room for your IP tests because your test items are large or bulky! Contact us. We would be happy to advise you on the planning ...

... housing and allows a precise way of proceeding for simple tests. •One-column •Dynamometer •Force •Manually-driven •Type - One-column tension / compression load frame •Version - Table top model •Measuring ...

... the model TesT 103 is a well-priced solution for various testing tasks. • SoftTesT • Motor-driven • One-column • Dynamometer • Force • Type - One-column tension / compression load frame • Version - Table ...

... we offer the model TesT 104 from our array of products. The cross-beam of this load frame will be moved by a hand crank. The crank is fixed at the front side of the housing and allows a precise way of proceeding for simple tests. ...

... Test Benches - Torque measurement Customized Designs Test benches play a key role in the development and testing of different components and applications. Our test benches are very accurate and ...

... Application The quality of the crimped connection is checked by applying a torsional force. Field of application In the automotive area for testing the press connection of components for truck and car engines: e.g. fuel injector ...

... Torque-rotation angle test in the cold-heat oven Application The specimen is cyclically loaded in a cold-heat oven to freely programmed load follow with torque. Rotation angle and temperature are documented with. Applicationfield Automotive ...

Hydraulic station for the testing of deep-drawing tools.

Hydraulic station with hot water for the testing of deep-drawing tools for sheet metal high resistance hot stamping for automotive.

... Simulation transport vibration test bench, suitable for toys, electronics, furniture, gifts, ceramics, packaging and other products for simulation transport test. 1. Low price: the price is only 10% ...

... This instrument is used in the laboratory to simulate the ability of the product to withstand impact damage in actual use, so as to evaluate the impact resistance of the product structure, and optimize the product structure strength through ...

... mode, adapt to the test requirements of different industries; increase the anti-interference circuit to solve the interference of the control circuit due to strong electromagnetic fields; increase the working time setter, so that the ...

... The MHT100 is a test station designed for academic units and R&D laboratories involved in fuel cell research, as well as for companies building stacks and conducting fuel cell and electrolysis tests. ...