Tubular heat exchangers

For further reductions in flue gas temperature in hot water boilers, a variety of flue gas heat exchangers are available. The ECO Stand-Alone retrofit models are available without a bypass for heating ...

Power: 295,000 W

... that allows it to effectively process water and oil. Furthermore, it exhibits a 200° F maximum operating temperature, a 400hp heat removal capacity making the devices from this series applicable for industrial applications.

Temperature: 982, 926, 650, 760 °C

... improved it to create a new generation heating technology – the OPTIMAX Heat Exchanger. Watlow’s new OPTIMAX technology combines optimal fluid dynamics, efficient heat transfer, low ...

Operating pressure: 6,800 psi
Temperature: -50 °C - 300 °C
Power: 6.25 kW - 31.2 kW

HYDROSAFE®, Watlow’s new indirect electric heat exchanger for dry gas seal applications, has been designed as a standardized thermal solution that minimizes custom engineering requirements because it ...

The IVL is a heat exchanger specifically designed for heat all kind of liquid with steam. Its main features are summarized: • Wide power range from 15,000 kcal / h. • Make by stainless ...

Thermal Oil Heat Exchanger to heat other types of oil by means of thermal oil as primary fluid To heat other types of oil such as vegetable, animal, etc., and adaptable ...

Operating pressure: 12 bar
Temperature: 10 °C - 300 °C
Power: 19,000 W - 469,000 W

The Turflow is a compact, corrugated tube heat exchanger suitable for a range of flow media - particularly well suited to fluids with lower viscosity such as juices, glycol, light solutions, CIP and suspensions ...

This unit is a Heat Transfer Solution designed to permit heat to go to a primary heat source transforming to a secondary fluid even without having a contact. The whole operation features ...

Operating pressure: 60 bar
Temperature: 285 °C

APV ParaTube (tube-in-tube heat exchangers) can be supplied with either straight tubes or corrugated tubes. They all follow a similar construction format with a single tube or number of smaller tubes ...

Operating pressure: 30 bar
Temperature: 160 °C

... patented direct product regenerative Product-to-Product (P2P) type of THE. This latest heat transfer solution has the highest hygienic standards and offers increased heat transfer efficiency over a traditional ...

Operating pressure: 30 bar

HDRT and HEXRT heat exchangers are designed to handle highviscosity products in heating, cooling, crystallising and freezing applications. They feature a horizontal cylinder arrangement based on a rigid ...

The success of the model of the Hybrid Heat Exchanger is moving into new markets and gaining customers’ enthusiasm. We also provide you with a standard heat exchanger ...

... mechanical engineers. Universal Hydraulik contributes its part to the trend and is supplying in-tank exhaust gas recirculation heat exchanger (EGR) for MAN trucks.

Power: 1,000 kW

... Hybrid Heat Exchanger produced by Universal Hydraulik combines the advantages of Shell & Tube- and Plate Heat Exchangers. A larger cooling surface through the hybrid-design ...

Operating pressure: 35, 16 bar
Temperature: 90 °C
Power: 0 W - 1,000,000 W

... additional cooling area, and offers a heat exchange performance of 1000 kW. This is produced by aluminium fins, which are pushed over the bank of tubes with metal-to-metal contact. The BAESNZ range of heat ...

Operating pressure: 0 bar - 16 bar
Temperature: -30 °C - 160 °C

» Screw in design allows integrating to existing components. » Allowable Connections 1.1/2" or 2" BSPP. » Compact design. » Various tube & sheet materials suit a variety of fluids. » Allows integration to applications such as gear units, ...

By means of a double tube, the danger of mixing the cooling medium and the medium to be cooled is prevented. The space between the two tubes is filled with a sealing liquid. A pre-charged diaphragm accumulator compensates the thermal ...

The construction of tube and shell heat exchangers is performed in compliance with customer-specific requirements. Applications: Cross-sectoral

... shell and tube heat exchangers have filled virtually every heat transfer need for over sixty years. Our experienced design and engineering staff stand ready to bring the best team with ...

A hairpin design is often more thermally efficient than a traditional shell and tube, which results in a lower up-front cost and lower overall weight. Our experienced designers and engineers can meet any custom cooling requirement.

Our Type ES extended surface plate fin heat exchanger is the industry leader for intercooler and aftercooler performance. Its unique patented compact plate fin design provides superior cooling of large ...

Operating pressure: 0.1 bar - 0.6 bar
Temperature: 25 °C - 67 °C
Power: 23 W - 76 W

OMT air/oil heat exchangers have been designed to be used on the return line of the hydraulic systems. The special structure of the cooler element in alualloy increases the conductivity quality, and the ...

Operating pressure: 0.2 bar - 1 bar
Temperature: 60 °C - 115 °C
Power: 25 W - 87 W

OMT air/oil heat exchangers have been designed to be used on the return line of the hydraulic systems. The special structure of the cooler element in alualloy increases the conductivity quality, and the ...

Operating pressure: 0.2 bar - 1.4 bar
Temperature: 78 °C - 152 °C
Power: 30 W - 300 W

OMT air/oil heat exchangers have been designed to be used on the return line of the hydraulic systems. The special structure of the cooler element in alualloy increases the conductivity quality, and the ...

Temperature: -200 °C - 200 °C

The B57 offers high heat transfer at an unmatched capacity on the Large platform, making it suitable for tight temperatures within Co-Generation, district heating, as well as a high performing evaporator and condenser ...

Temperature: -200 °C - 200 °C

The V10T is our smallest evaporator. It delivers excellent heat transfer in many cooling applications, and replaces traditional technologies such as tube-in-tube and coaxial heat exchangers. ...

... drive shaft and bearing block Overall length of heat exchanger is reduced by 20 - 25% Easy to maintain and self-aligning Available with up to 30 horsepower for handling the most viscous products Removable ...

Operating pressure: 20, 25 bar
Power: 3,000, 2,200, 4,000, 3,700 W

... the Votator LD scraped surface heat exchanger is designed to operate under harsh conditions where other heat exchanger technologies can fail or cannot sustain operational ...

... cooling products with viscosities in the 1,000,000 centipoise range. They can be specified with concentric, eccentric or oval heat transfer tubes to provide optimum processing conditions for any product. 3A, ASME and ...

... static mixer heat exchangers which can be used for the inline heating and cooling of products. Because of the sophisticated construction, the PRIMIX heat exchanger ...

Our Kenics TM Static Mixer technology, available exclusively in our Kenics TM Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable ...

Operating pressure: 15 psi

The Frick® Vertical Intercooler (VI) desuperheats booster compressor discharge gas prior to entering the high stage compressors. At times the intercooler may also serve as a suction accumulator for high temperature loads FEATURES AND ...

Operating pressure: max 16.0 bar
Temperature: max 150.0 °C

Our new brand of heat exchangers has been designed to meet industrial hydraulic requirements, while keeping all MOTA products' advantages. Reliability: By design, reliability of the MOTA Industrial ...

Operating pressure: 0 bar - 30 bar
Temperature: 150 °C

... and standard threaded connections on the hot side. All heat exchangers provided by MOTA deliver our highest standard heat rejection: high density tubestack allows a very compact heat ...

Product Details High efficiency coefficient is 10000 W / m2 ° C, 5 or 6 times more efficiency than standart heat exchangers. Its compact design is 1/10 according to standart products. Stainless steel ...

Tube Heat Exchanger is a class of heat exchanger designs used in all processes. It has several variations within its own group. Many machines used in industry need ...

... manufactures all kinds of exchangers: “tube in tube” exchangers , shell and tube exchangers, heating coils… These exchangers conform to the CE97/23, CODAP standards ...

Coil-wound heat exchangers (CWHEs) are required for a wide range of applications involving fluid treatment. They must support broad temperature and pressure ranges as well as single- and two-phase streams. We ...

We manufacture a diverse variety of shell & tube tantalum heat exchangers with stainless steel or steel shells, with glass, steel glass lined or tantalum bonded steel heads, in standard or GMP design, ...

Operating pressure: 0 bar - 1,000 bar
Temperature: -100 °C - 400 °C
Power: 0.1 kW - 10,000 kW

The design of the mixer / heat exchanger equates to a combination of a static mixer and a multitube heat exchanger in which a highly viscous product on the shell side ...

Operating pressure: 0 bar - 200 bar
Temperature: -100 °C - 400 °C
Power: 0.1 kW - 10,000 kW

... These elements increase the heat transfer from the product to the tube wall, so that smaller sizes can be realised than if the multitube heat exchanger has no mixing elements. Multitube ...

Operating pressure: 0 bar - 100 bar
Temperature: -100 °C - 400 °C
Power: 0 kW - 1,000 kW

... between the primary and secondary media, with practically total dranage on the product side. Fluitec sterile shell and tube heat exchangers are therefore ideally suited to CIP/SIP plants. A special ...

Operating pressure: 150, 5,000 psi
Temperature: 400, 1,000 °F

... assemblies, that are integrated into shells. Two paths for each each model are created for comprehensive levels of counter-flow heat conveyance. Other features of the Spiral Tube Sample Coolers include pressure rates ...

Operating pressure: 31 bar

... Can save upwards of 13% on running costs Robust and coded steel design, with superior enhanced tubes for maximum heat exchange efficiency

Teralba Industries' range of Shell and Tube Heat Exchangers, also referred to as Multitube™, are ideal for fluids and gases where space (compactness) is important. The primary fluid or product is supplied ...

... Dimpleflo® Monotube system is a simple yet extremely versatile and effective tube heat exchanger. The dimple profiles of various configurations increase turbulence to enhance heat transfer ...

Teralba Industries Dimpleflo® Modular heat exchanger systems can be incorporated in to Teralba's Monotube™ and Multitube™ heat exchange units and have virtually unlimited potential for ...

Operating pressure: 55 bar
Temperature: -30 °C

... . Reduction of heat transfer costs. CO2 is a very efficient refrigerant which has an external heat transfer coefficient which is 2-3 times higher than that of NH3 and which will increase the total ...

Operating pressure: 17.5 bar
Temperature: -25 °C

A compact, high-quality, medium-capacity scraped surface heat exchanger that promises superior crystallization performance, minimal downtime and easy maintenance. GS Perfector 125 supports a production ...

Operating pressure: 17.5 Pa
Temperature: -25 °C

A compact SSHE designed exclusively for the chilling of semi-liquid fillings such as shortening and soft table margarine - promises reliable performance, minimal downtime and easy maintenance. GS Perfector 150 supports various production ...