... The new METPOINT VFS TI and METPOINT VFS TM volumetric flow meters are suitable for applications with compressed air or nitrogen. They simultaneously measure the volume flow, flow ...
... The new METPOINT VFS TI and METPOINT VFS TM volumetric flow meters are suitable for applications with compressed air or nitrogen. They simultaneously measure the volume flow, flow ...
Process temperature: -20 °C - 800 °C
... Measurement of the volume flow, especially in dusty applications. Easy installation on existing ducts, no Venturi or similar conversions are required. Can be used in environments with low dust loads or in harsh conditions ...
Volumetric flow rate: 3 m³/s - 50 m³/s
Process temperature: 800 °C
... CEM Approved Flue Gas Velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS FEATURES & BENEFITS - Continuous high-quality measurement ...
Process temperature: 150 °C
Process pressure: 150 bar
... reagent in flue gas treatment and transport lines with very low material concentration Electrodynamic flow sensor for measurement of low flow rates from 0 to 100 kg/h. For pipe diameters up to 1 m. Ideally used ...
Process temperature: -20 °C - 60 °C
Process pressure: 0.6, 1.6, 4 MPa
Precision: 0.5, 0.2 %
... inertia — fast response; capable of measuring instantaneous pulsating flow with good linearity.
Shanghai LEEG Instruments Co.,Ltd.
Process temperature: -20 °C - 60 °C
Process pressure: 1.6 MPa
Precision: 2.5 %
... electromagnetic flow meter measures conductive liquid flow using an insertion probe suitable for large-diameter pipelines. The design supports hot tapping and pressurized installation, allowing installation ...
Shanghai LEEG Instruments Co.,Ltd.
Process temperature: -40 °C - 60 °C
Process pressure: 4, 1.6, 1, 0.6 MPa
Precision: 0.2, 0.5 %
... cumulative flow during power-off.
Shanghai LEEG Instruments Co.,Ltd.
Precision: 0.25, 0.4 %
Repeatibility: 0.5 %
... various sensor parameters, anticipating possible problems. The battery converter with integrated modem MV255, flow meters, energy meters, ...
ISOIL Industria Spa
Process temperature: 0 °C - 100 °C
Process pressure: 25 bar
Precision: 2 %
... Description The electromagnetic insertion sensor MS3810, flow meters, energy meters, ultrasonic flowmeters, and industrial automation systems have been ISOIL Industria‘s passion and continuous ...
ISOIL Industria Spa
Process temperature: -10 °C - 60 °C
Precision: 3, 0.5, 1 %
Repeatibility: 0.15 %
... Description The ultrasonic flow meter clamp-on for fixed installation IFX-F100, flow meters, energy meters, ultrasonic flowmeters, and industrial automation systems ...
ISOIL Industria Spa
... Signature flow meter is designed for open channel flow monitoring applications. It supports flow measurement technologies including bubbler, non contact laser area velocity, submerged ...
Process temperature: 10 °C - 45 °C
Process pressure: -1 bar - 20 bar
Precision: 2.5 %
...
Measurement ranges (flow)
Range | Accuracy | Max resolution
2 ml/min | ±2.5% of
flow + 0.002 ml/min | 0.001 ml/min
20 ml/min | ±2.5% of
flow + 0.02 ml/min | 0.01 ml/min
200 ...
Volumetric flow rate: 0.3 l/min - 140 l/min
Process temperature: -20 °C - 70 °C
... SONOFLOW CO.55 CLAMP-ON SENSOR - NON-CONTACT FLOW METERS FOR LIQUIDS IN FLEXIBLE TUBES The ultrasonic clamp-on flow meter SONOFLOW CO.55 measures the flow rate of ...
SONOTEC GmbH
Volumetric flow rate: 18 l/min
Process temperature: 0 °C - 90 °C
... between tube and transducer •No external electronics for a compact design and simple handling •Customer calibration for different flow rates ...
SONOTEC GmbH
Volumetric flow rate: 14 l/min
Process temperature: 10 °C - 50 °C
... The hybrid flow-bubble sensors of the series SONOFLOW CO.56 Pro V2.0 and SONOFLOW CO.56 combine accurate flow measurement and reliable air bubble detection in liquid filled medical tubing. They feature a simple integration ...
SONOTEC GmbH
Process temperature: -40 °C - 85 °C
Precision: 1 %
Repeatibility: 0.1 %
... Low power consumption enables operation using solar cells - Recognition of flow direction - Measuring range from +/- 0.10 to +/- 15 m/s (depending on the flow conditions) - Recognition of hysteresis-effects - ...
SOMMER Messtechnik GmbH
Process temperature: -40 °C - 85 °C
Precision: 1 %
... TRANSMISSION IN COMPACT Housing The RQ-30 ADMS is an all-in-one discharge measurement System. It contains the non-contact flow velocity and water level sensors of the RQ- 30 and applies the same algorithms and model to calculate the ...
SOMMER Messtechnik GmbH
Process temperature: -40 °C - 85 °C
Precision: 1 %
Repeatibility: 0.1 %
... .10 to +/- 15 m/s (depending on the flow conditions) Fields of application The main advantage of the RQ-30d is that the discharge can be measured more precisely, especially in rivers and streams where the flow ...
SOMMER Messtechnik GmbH
Volumetric flow rate: 0.6 l/h - 600 l/h
Process temperature: -10 °C - 60 °C
Process pressure: 10 bar
... Technical Data Service: gas & liquid Wetted parts material: Body-Polycarbonate (PC); O-Ring-NBR (standard); Float-SS316, POM Plastic Connection material: Stainless steel Connection size: 1/8"NPT female; and female 1/4"NPT, R1/4", G1/4" available Pressure ...
Golden Mountain Enterprise
Volumetric flow rate: 4 l/h - 200,000 l/h
Process temperature: -50 °C - 200 °C
Precision: 2 %
... Technical Data BF300E for high flows of gas, liquid and steam Case Material: SS316 Body wetted parts: SS316, Others on request. Indication via magnetic coupling (no sealed) Scales calibrated: in l/h, m3/h, kg/h, %, etc.. Flow ...
Golden Mountain Enterprise
Volumetric flow rate: 0 l/h - 1,000 l/h
Process temperature: -24 °C - 54 °C
Process pressure: 10 bar
... Technical Data Service: gas & liquid Wetted parts material: Body- Acrylic Plastic O-ring— NBR (standard), Viton on request Float- SS316, Glass, POM Plastic Connection material: Stainless steel Connection size: 1/8"NPT female Temperature & pressure ...
Golden Mountain Enterprise
... The SeFlow 400 is Sewerin’s single channel portable flowmeter for applications in the municipal water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote areas outdoor. Thanks ...
Volumetric flow rate: 1.6 m³/h - 3,125 m³/h
Process temperature: -40 °C - 70 °C
Process pressure: 1 bar - 10 bar
... reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation. EPD Electromagnetic ...
FineTek Co., Ltd.
Process temperature: -20 °C - 60 °C
Precision: 2.5 %
... are dispersed is proportional to the flow rate of the liquid. Hence, the flow rate of the liquid is derived. Features EPU Clamp-On Ultrasonic Flowmeter 。No intrusion in the pipeline during measurement ...
FineTek Co., Ltd.
Process temperature: -156 °C - 60 °C
Process pressure: 10 bar
Repeatibility: 0.4 %
... The company's flow test equipment, Testable 10mm~300mm mouth Diameter flow sensor. Description EPR Paddle Wheel Flow Meter, Water Flow Meter Paddle ...
FineTek Co., Ltd.
Process pressure: 0 Pa - 1,500 Pa
... The venturi tube is a primary element for flow metering in tubings. The principle of the venturi tube allows for meterings with all media. The venturi tube described here is especially designed for air flow metering ...
Volumetric flow rate: 0 m³/h - 3,800 m³/h
Process temperature: 0 °C - 80 °C
Process pressure: 0 Pa - 1,500 Pa
... The venturi tube is a primary element for flow metering in tubings. The principle of the venturi tube allows for meterings with all media. The venturi tube described here is especially designed for air flow metering ...
... transmitters of DA2000er series: • Large analog display (270 °) – Scale length 250 mm • Scale in m³ / h • Different limit indicator • Analog outputs 0 … 10 V or 4 … 20 mA possible (linear or square root) • Combination with a pressure ...
Volumetric flow rate: 0.1 l/min - 120 l/min
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 30 bar
... Custom stairs The Flowmeter FLUP have high visibility on each side and a clear reading of the scale. Thanks to the conformation of the cone, at regular increases of flowrate match movements equally regular of the shutter Threaded ...
Volumetric flow rate: 0 l/min - 1.5 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 100 bar
... ES- FLOW® are Volumetric Liquid Flow Meters for very low flow ranges. The instruments operate on a innovative measuring principle, using ultrasound in a very small, straight tube. A wide ...
Volumetric flow rate: 0.5 l/min - 150 l/min
Process pressure: 0 bar - 12 bar
... The smart and lightweight Vortex meter for monitoring low viscosity, water-like liquids LIQUI-VIEW Base instruments offer a cost-effective solution for monitoring the flow or consumption of cleansing water, cooling ...
Volumetric flow rate: 0 l/min - 250 l/min
Process temperature: -10 °C - 60 °C
Process pressure: 10, 6, 8, 16 bar
... frequency of the pulse output signal is proportional to the flow. The flow meters feature fast response, low pressure drop and a weatherproof (IP65) enclosure. Features •Make liquid flows ...
... TANGENTIAL WATER METER, CAST IRON BODY AND METALLIC CASE High flow capacity and free water passage with low pressure loss Self-cleaning tangential impeller suitable for dirty water Removable ...
Tecnidro
... TANGENTIAL WATER METER, CAST IRON BODY AND TECHNOPOLYMER CASE High flow capacity and free water passage with low pressure loss Self-cleaning tangential impeller suitable for dirty ...
Tecnidro
... MULTI JET, DRY DIAL, DIRECT READING WATER METER High flow capacity and free water passage with low pressure loss Self-cleaning tangential impeller suitable for dirty water Removable and replaceable ...
Tecnidro
... turbulent or reverse flow, while it can take as much as 30 diameters of straight duct run to eliminate cyclonic flow. If you do not have the proper amount of straight duct run present to accurately measure your air flow, ...
Eastern Instruments
Mass flow rate: 100 lb/h - 1,000,000 lb/h
Volumetric flow rate: 8.44 ft³/min - 562.4979 ft³/min
Repeatibility: 0.1 %
... CentriFlow Meter from Eastern Instruments is a Solid Particle Mass Flow Meter that is durable, accurate, maintenance-free, compact, and cost-effective. The CentriFlow Light Density Meter ...
Eastern Instruments
Process temperature: -40 °F - 900 °F
Process pressure: -6 psi - 6 psi
The DSV Duct Section for Round ducts allows easy installation of VAP Pitots within new or existing duct work. The VAP Pitots are mounted within a flanged duct section and the pitots are tubed together for easy installation and setup. The DSV for Round ...
Eastern Instruments
... specific and regulated pressure and the resultant flow of air must be less than a specified limit dependant on the internal volume of the device. Missing or damaged case seals will result in excessive air flow ...
Furness Controls
Volumetric flow rate: 0 l/min - 20,000 l/min
... FCO752 is quite possibly the most flexible, reliable, and diverse flow meter available today. Air and gas flows from 0.01 ml/min to 10,000 l/min Using Furness Controls Laminar flow ...
Furness Controls
Volumetric flow rate: 0 l/min - 10,000 l/min
Precision: 1 %
... few. The FCO732 is one of the most flexible, reliable and diverse flow meters on the market. Excellent accuracy of <±1% Reading Using the well proven Furness Controls laminar flow technology, the ...
Furness Controls
Volumetric flow rate: 0.8 l/h - 1,200 l/h
Process temperature: 80 °C
Process pressure: 0 bar - 4 bar
... Float-type flow meter - Connections: GL 18–6 mm - Corrosion-resistant - For wall mounting in a vertical position - Material of sample-contacting parts: glass, PTFE Corrosion-resistant, without needle valve, for wall ...
M&C TechGroup Germany GmbH
Process temperature: 80 °C
Process pressure: 0 Pa - 400,000 Pa
... with needle valve, for wall mounting The M&C flow meters – type FM 1 and FM 10 – which are highly corrosion-resistant are used for controlling the flow in the case of aggressive gases and liquids. The ...
M&C TechGroup Germany GmbH
Process temperature: -25 °C - 70 °C
... - Optical flow alarm sensor for bistable and monostable use - Bistable: sensor detects if sufficient or low flow is present - Monostable: sensor detects set flow value - For float-type flow ...
M&C TechGroup Germany GmbH
Volumetric flow rate: 0 l/min - 700 l/min
Process temperature: -60 °C - 210 °C
Process pressure: 0 bar - 400 bar
... generated per sensor that corresponds to the so-called geometric tooth volume Vgz. The dual-channel scanning facilitates a higher measuring resolution and detection of the direction of flow. Alternatively available ...
KRACHT GmbH
Volumetric flow rate: 0 l/min - 200 l/min
Process temperature: -10 °C - 120 °C
Process pressure: 0 bar - 240 bar
... the liquid flow based on the displacement principle. The gears run in an almost contactless manner in the measuring chamber. The bearing consists of ball and plain bearings. The measuring principle does not cause any pressure or volume ...
KRACHT GmbH
Volumetric flow rate: 0.4 l/min - 3,750 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 480 bar
... screw spindles with rolling-element bearings for low friction. The liquid flow makes the spindles rotate (displacement principle) and runs through the device in axial direction. Flow in and out takes place without ...
KRACHT GmbH
Volumetric flow rate: 0.1 m³/h - 381,703.5 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 bar - 250 bar
... (is fit for the measurement of ) the volume flow of conductive medium including the acid, alkali, salt solution, slurry, pulp, paper pulp, waste water. Advantages 01It is the volume flow ...
Holykell
Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.5, 0.2 %
... The Economic type Clamp-on Ultrasonic Water Flowmeter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well as liquid with small quantity of tiny particles. Application ...
Holykell
Process temperature: -30 °C - 80 °C
Precision: 2, 1 %
... solution for monitoring the flow or velocity of open channels, agricultural irrigation or groundwater. the best solution. Application : ● Open channel flow rate or flow monitoring (Parshall trough, ...
Holykell
Volumetric flow rate: 0.025 l/h - 250 l/h
... Used in workshop or laboratory, they are equipped with a flow adjusting valve. ...
Volumetric flow rate: 0 m³/h - 19.8 m³/h
Process temperature: 0 °C - 90 °C
Precision: 2 %
... Product Overview
The TAD series ultrasonic in-line
flow sensor from XY-TEK integrates sensing and signal processing in a compact housing to provide
continuous liquid
flow measurement without ...
XY-TEK
Volumetric flow rate: 0 l/min - 12 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %
... Overview
The CM series clamp-on ultrasonic
flow sensors /
flow
meters are compact, non-invasive devices with embedded electronics. They attach to flexible plastic tubing to measure liquid ...
XY-TEK
Volumetric flow rate: 0 l/min - 100 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %
... /strong>
The CM series clamp-on
flow sensors/
flow
meters are similar to CG series sensors/
flow
meters in basic structure and function. The major difference is that ...
XY-TEK
Process temperature: 0 °C - 60 °C
... >AI.C-SONIC is the cutting-edge solution for measuring water flow in small pipes. Thanks to "transit time" ultrasonic technology, this instrument allows precise flow monitoring without cutting pipes or ...
ASIT ITALIA
Volumetric flow rate: 0.1 m³/h - 61,072 m³/h
Process temperature: -25 °C - 180 °C
Process pressure: 40 bar
... The AI.MF Series electromagnetic flow meter from ASIT Italia is the ultimate professional instrument for the precise measurement of conductive liquids. Thanks to the absence of moving parts, it guarantees ...
ASIT ITALIA
Volumetric flow rate: 0.1 m³/h - 61,072 m³/h
Process temperature: -25 °C - 180 °C
Process pressure: 40 bar
... The AI.MF Series electromagnetic flow meter from ASIT Italia is the ultimate professional instrument for the precise measurement of conductive liquids. Thanks to the absence of moving parts, it guarantees ...
ASIT ITALIA
Precision: 0.3 %
... Product overview
- EFM water monitoring system from E&E Solutions Pvt. Ltd for continuous online monitoring of industrial water parameters.
- Designed to provide real‑time data to plant control and water management
Process temperature: 5 °C - 55 °C
Process pressure: 0.3 bar - 16 bar
Precision: 2 %
... Product Overview
Ultrasonic
Flow
meter EE-UWFM-DNX is an advanced inline ultrasonic water
flow
meter designed for real-time water management. It addresses the challenges of ...
Volumetric flow rate: 2.12 l/min - 4,121,766.82 l/min
Process temperature: -20 °C - 180 °C
Precision: 2 %
...
- Can this meter be used in industries with high-flow water systems? Yes, it is designed for high-flow water systems and provides accurate measurements in industrial environments.
- Does
Process temperature: -20 °C - 50 °C
... 15 universal inputs max. 72 analogue inputs max. 72 digital inputs max. 36 TC inputs max. 18 RTD inputs max. 12 counter / flowmeter / ratemeter inputs max. mixed: analogue-NTC temperature mixed: analogue-digital ...
Process temperature: -20 °C - 50 °C
... 9 universal inputs max. 48 analogue inputs max. 48 digital inputs max. 24 TC inputs max. 12 RTD inputs max. 12 counter / flowmeter / ratemeter inputs max. 1 digital input 24V DC mixed: analogue-NTC temperature mixed: ...
Process temperature: -20 °C - 50 °C
... MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package stable firmware based on Linux 13 available input/output blocks colour LCD display 3,5" TFT, with touchscreen recording data with maximum speed 10Hz (ten samples ...
the best suppliers