Power: 1,125, 1,700 W
Maximum temperature: 2 °C - 3 °C
Flow rate: 40 l/h - 450 l/h
... BKL Ice Water Chillers, work according to the same principle: fresh drinking water under natural pressure, runs through a spiral in a 0°C water bath, forcibly cooled by means of ice, accumulated along ...
Baktec
Power: 15, 7.5, 5.6, 27, 19 kW
... The necessary ice water vats to include to the mix treatment plants Mod. Mixworking, supply ice water (+2°C) to both the ageing vats for the conservation of the mix at 4°C and to the plate exchanger for the instant cooling ...
Power: 2,000 W - 170,000 W
Maximum temperature: 5 °C - 45 °C
Power: 2 kW - 360 kW
Maximum temperature: 0 °C - 25 °C
... Carbon dioxide (CO2) lasers, excimer lasers, ion lasers, solid-state lasers, and dye lasers all use liquid cooling to remove excess heat. Laser liquid cooling can help accomplish three goals: • Maintaining a precise ...
... Product Overview
The SUPERCOOLER SPV-BIB vacuum insulated
cooler box is fitted with refrigerator-grade Vacuum Insulated Panels (VIPs) on the base and all four sides to provide superior thermal insulation. The exterior surface ...
Power: 20 kW - 150 kW
... with up to ten units operating in a group; User friendly navigation with icon based displays to indicate mode of operation as well as room conditions; Allows for communication with multiple Building Management System protocols. Direct ...
Power: 765 W - 2,750 W
Maximum temperature: -10 °C - 40 °C
Flow rate: 14.7, 11 l/min
... alternative to tap water cooling, these Recirculating Chillers reduce water consumption, while the patented WhisperCool® Environmental Control System reduces noise levels below conversational speech at ...
Maximum temperature: 41 °F - 86 °F
Flow rate: 1,350 ft³/min - 38,850 ft³/min
... reutilizing the same water to avoid waste. It always supplies the exact water temperature requested, despite ambient conditions and load requests. Parker Hyperchill water chillers ...
... at a closer look HVDC Cooling Systems HVDC cooling systems are project specific. The essential quality factors are water purity and low conductivity. Our Cooling Systems are designed ...
Hitachi Energy
Power: 230, 330 W
Flow rate: 2.2, 2.6 l/min
... •High cooling capacity (200 kj/min) • No priming water required Cascade pump eliminates the need for priming water. •Easy maintenance No tocls are required to replace coolant. Tank and fille^ are easily removable, which ...
Power: 1.8 kW - 6.5 kW
Maximum temperature: -20 °C - 55 °C
Flow rate: 400 l/h - 1,500 l/h
... site where utilities supplying cooling water is of a lower quality or special requirements of cooling water are needed, BARTEC BENKE closed loop chillers can be supplied to meet these applications. The ...
Maximum temperature: 1 °C - 37 °C
... air-cooled OMAX Chiller optimally supplies inlet water at a consistent temperature, which extends pump seal life for longer, more sustainable production. Using the 5 Ton Chiller or larger also allows ...
... pull-out rack for fast maintenance. The module monitors
water flow and records supply and return temperatures. The
water tank level indicator is illuminated; the illumination colour indicates
water temperature.
Benefits
- High
CLOOS
Power: 76 kW - 360 kW
Maximum temperature: 5 °C - 45 °C
... • Large water tanks allow minimum compressor cycling and precise temperature control. • Double independent fridge circuits. • 2 compressors from ICE076 and 4 compressors from ICE150 with automatic rotation. • Double stand-by ...
... Exact temperature control by water-cooling system Depending on the different applications, a polyurethane system often requires extremely exact temperature control methods. Hennecke uses industrial chillers with water ...
Maximum temperature: 3 °C - 45 °C
... The Water Chiller is an auxiliary piece of equipment to the Blister Machine. It can protect the blisters from deforming by absorbing heat from the forming and sealing mold, thereby increasing the quality of blister forming ...
... Overview
The NANUK
Cooler 12 is a soft insulated
cooler bag designed for daily use and short excursions. With a 13.6 L (12-can) capacity and 25 mm closed-cell EPE foam insulation, it provides up to 24 hours ...
NANUK
... rotomolded hard cooler engineered for serious adventures, extended hunting trips, offshore fishing, and any situation where failure simply isn’t an option. Built without compromise, sized for the long haul, and ready for conditions most ...
NANUK
... Overview Rotomolded hard cooler designed for extended outings where capacity and ice retention are essential. The NANUK Cooler 45 (45 qt / 42 L) is suited to basecamps, multi-day trips, fishing and marine use where ...
NANUK
Maximum temperature: 0 °C
... rapidly reduced by means of a shower of water close to 0ºC. Depending on the fruit, the cooling time will vary. How does hydrocooling work? The system consists of: A stainless steel structure. Upper water tank ...
... to the many industrial needs, SIMACO - leader in the fluid moving technology - designed a dedicated range of close loop air- water cooling units, where the SIMACO pump, actual beating heart, is naturally assembled. This product serves ...
Power: 1,000 W
Flow rate: 5 l/min
... Water cooling unit Cool 55 Water cooling unit for application with Tetrix 200 inverter and Tigtronic Compact in conjunction with water-cooled welding tools. Technical Data: Input voltage: 230VAC Cooling ...
Power: 1,000 W
Flow rate: 4 l/min
Pressure: 3.5 bar
... Water cooling unit EVO Cool Water cooling unit for use with the EVO 200 WP or LITE controller and Tetrix 200 in conjunction with water-cooled welding tools.ols. - Standalone or continuous operation possible - ...
Maximum temperature: 3 °C - 5 °C
... spots, etc. • It can be also used for dust suppression, static charge prevention, and humidification. *1) Spray capacity at a water pressure of 5.0 MPa when the number of installed nozzles is 8 pcs. The number of installable nozzles ...
... at tap water pressure of 2 kg/c㎡ (0.2 MPa). It varies by the tap water pressure. 4.8 L/hr at 3 kg/c㎡ (0.3 MPa) tap water pressure, 5.1 L/hr at 3.5 kg/c㎡ (0.35 MPa) tap water pressure Up ...
Maximum temperature: 3 °C - 5 °C
... capacity for each nozzle at tap water pressure of 3 kg/c㎡ (0.3 MPa) when 6–7 nozzles are installed. Spray capacity varies depending on tap water pressure and the number of nozzles. Spray capacity for each nozzle with ...
... distribution. - - Manual dampers for the adjustment of air inlet (fresh air) and outlet (wasted air). - - The cold source is a water battery - - Temperature control sensors for controlling the cold air. ...
Power: 8.61 kW - 29 kW
Flow rate: 1.36 m³/h - 4.42 m³/h
... cooling. Air Cooled Chillers are often an excellent process cooling option to water cooled chillers because they are closed loop systems. Closed loop systems have the ability to offer instantaneous cooling ...
Power: 3 W - 5 W
Flow rate: 100 l/min - 360 l/min
... cooling. Air Cooled Chillers are often an excellent process cooling option to water-cooled chillers because they are closed-loop systems. Closed-loop systems have the ability to offer instantaneous ...
Power: 150 W
Flow rate: 10 l/min
... >Description
This closed
water cooling unit provides autonomous cooling for industrial equipment. A circulation pump draws
water from a 40 l reservoir to cool the machine, preventing overheating and reducing
water ...
Power: 14.5, 28.9, 42.7, 57.9 kW
Flow rate: 70, 110, 170, 230 l/min
... we supply water cooling chiller and air cooling chiller Water chiller machine is an important cooling machine in plastic extrusion line. Especially for large production ...
the best suppliers