These 5/2 and 5/3-way valves have a balanced spool construction type and can be mounted using screws on the base. They can be installed in any position and are available in sizes of 18 mm and 26 mm. They have a minimum and maximum operating temperature of 0°C to 50°C respectively, an operating pressure of P. max 7 bar and a nominal pressure of 6 bar.
The body and spool base of the valves is constructed from AL, the end covers are polyamide and the seals are NBR. The ports are housed on the sub-base. The medium used is fluid filtered air (5 micron or less) without lubrication. However, if lubrication is used, ISOVG32 oil is recommended and the lubrication must not be interrupted once applied.