When using G-type rotating and refraction micro-jets, we sometimes encounter such problems. After the water flow changes direction at the elbow, a large number of eddy currents and lateral circulations are generated. The function of the nozzle is to eliminate eddy currents and circulations and stabilize the water flow, but To achieve the effect of steady flow only by the length of the nozzle, the size of the nozzle must be lengthened. In order to better achieve the effect of steady flow, shorten the length of the nozzle, and often set a flow stabilizer in the nozzle.
The G-type rotating and refraction micro-jets cooperate with the flow stabilizer to divide the cross section of the flow channel into several parts, cut off the lateral circulation, increase the chance of lateral water collision, * the proportion of laminar flow, play a role in stabilizing the water flow. However, if the number of partitions is too large, the friction loss will increase, which will cause head loss. The partitions are generally 3 to 5 pieces.
G-type rotating and refraction micro-jet nozzles need to be repaired, regularly inspected, cleaned and even replaced in order to ensure product quality and maintain the economic benefits of the production process. The method and frequency of maintenance procedures depend on the application. The maintenance plan can be arranged according to the purpose, liquid and nozzle material.
The use of G-type rotating and refraction micro-jets under abnormal conditions will shorten the service life. Most of the cases are due to incorrect installation: washers that deviate from the axis, excessive tightening or other changes in position can have adverse effects.