Spray dispensing valve SVKA

high-speedfor oilgreasing and lubrication

Application
The SVKA spraying valve is suitable for spraying thin-bodied media, e.g. release agents, oils or paints.

Description
Depending on the air cap used, a flat or a round jet can be generated. Depending on the viscosity of the medium to be applied, the application pattern can be individually adjusted via the nozzle size and the spray air pressure.
The connections of the three function hoses (control air, atomization air and material hose) can be optionally mounted on the side or on the rear.
Optional with mounting bracket (Ø 10 mm).
Available nozzle sizes: Ø 0.2 / 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 2.0 / 2.5 mm

Advantages
The SVKA's light weight and compact size make it ideal for all spraying applications where there is very little space available for installation in machines or robots.
The raster regulation allows easy adjustment of the material quantity.
The spray pattern can be individually adapted via different air cap and nozzle variants.

• Spraying of low viscosity media
• Simple adjustment of the material quantity
• Light weight and small size
• Available nozzle sizes: Ø 0.2/ 0.3/ 0.5/ 0.8/ 1.0/ 1.2/ 1.5 mm

Technical Data
Injection material pressure
max. 3 bar
Control air pressure
3–6 bar
Spray air pressure
0.5–6 bar
Length x width x height
42 x 25 x 25 mm with flat jet cap
39 x 25 x 25 mm with round jet cap
Main body
stainless steel
Nozzle + needle
stainless steel
Seals
Viton (other materials on request)

Versions
DP-K-003-000016 // SVKA-FK-RN-S-KLS05-F60-00
Spraying valve with flat jet 60°
DP-K-003-000017 // SVKA-FK-RN-S-KLS05-R15-00
Spraying valve with round jet 15°
DP-K-003-000018 // SVKA-FK-RN-S-00000-000-00
without nozzle

Characteristics / Technical Specifications

• Suitable for spraying thin-bodied media (release agents, oils, paints)
• Flat or round jet depending on air cap
• Individually adjustable application pattern via nozzle size and spray air pressure
• Connections for control air, atomization air, and material hose (side or rear mounting)
• Optional mounting bracket (Ø 10 mm)
• Nozzle sizes: Ø 0.2 / 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 2.0 / 2.5 mm
• Light weight and compact size
• Easy adjustment of material quantity
• Injection material pressure: max. 3 bar
• Control air pressure: 3–6 bar
• Spray air pressure: 0.5–6 bar
• Dimensions: 42 x 25 x 25 mm (flat jet cap), 39 x 25 x 25 mm (round jet cap)
• Main body: stainless steel
• Nozzle + needle: stainless steel
• Seals: Viton (other materials on request)