Micro-jetting valve FSV02 SINGLE

precisionelectro-pneumatic actuatorgrease

Application
The grease shot valve is used to apply various viscous media from a distance of up to 120 mm.

Description
The FSV02 single includes a solenoid valve, as well as a micromodule with optimized nozzle and heating with two heating controllers. The material is discharged with perfect tear-off as a point or bead. The control takes place exclusively via the D+P dosing system. Available nozzle sizes: Ø 0.21–0.81 mm.

Advantages
The 2-valve shut-off technology enables metering of very small quantities with very short switching times, and the compact design means that the nozzle can be optimally used even in the tightest of spaces. The valve is splash-proof and has an integrated material filter to ensure permanently clean material discharge.

• Contactless application of low to high viscosity media
• 2-valve closure technology for minimum quantity metering
• Compact design
• Short switching times
• Available nozzle sizes: Ø 0.21–0.81 mm

Technical Data

• Mechanical data
  • Width x height x depth: 348 x 625 x 273 mm
  • Mounting position: any, even overhead
  • Max. pumpable viscosity: oils and greases NLGI class 0–3
  • Application quantity per shot: 1–20 cm³
  • Material temperature: max. 120 °C
  • Switching frequency: max. 100 Hz
  • Medium inlet pressure: 5–68 bar, depending on application – depending on viscosity
  • Order distance: max. 120 mm
  • Heating time: approx. 5 min
  • Pneumatic air pressure: 6 bar, optionally with pressure booster combination
  • Line length control air: max. 100 mm
• Environmental conditions
  • Storage and transport temperature: –40–70 °C
  • Working temperature: 35–65 °C
  • Ambient temperature: –7–50 °C
  • Humidity: 50–70 %
  • Material: For all work, the material must be brought to the correct processing temperature. Note this temperature when the material comes from cold storage rooms, a heater is provided for heating the material or cooling is provided for cooling the material.
  • Other: Operation in closed rooms. Protect from direct sunlight, dust and moisture. Installation altitude maximum 2000 meters above sea level.
  • EMC resistance: according to EN 61000-6-2:2001 (industrial area)
• Electrical data
  • Temperature sensor: PT 100 / 2 conductors
  • Power supply: 240 V AC 50–60 Hz
  • Power heating: 240 V: 155 W

Characteristics / Technical Specifications

• Product: GREASE SHOT VALVE FSV02 SINGLE
• Brand: D+P Technik Gmbh
• Model: FSV02
• Article number: DP-D-007-000005
• Contactless application
• 2-valve closure technology
• Compact design
• Short switching times
• Nozzle sizes: Ø 0.21–0.81 mm
• Application quantity per shot: 1–20 cm³
• Material temperature: max. 120 °C
• Switching frequency: max. 100 Hz
• Medium inlet pressure: 5–68 bar
• Order distance: max. 120 mm
• Heating time: approx. 5 min
• Pneumatic air pressure: 6 bar
• Line length control air: max. 100 mm
• Storage and transport temperature: –40–70 °C
• Working temperature: 35–65 °C
• Ambient temperature: –7–50 °C
• Humidity: 50–70 %
• EMC resistance: EN 61000-6-2:2001
• Temperature sensor: PT 100 / 2 conductors
• Power supply: 240 V AC 50–60 Hz
• Power heating: 240 V: 155 W