Spray dispensing valve SVSV

high-speedfor oilgreasing and lubrication

Application
The SVSV spraying valve is used for the application of release agents, oils and paints and is suitable for both pulsating and continuous application.

Description
The SVSV is a pneumatically actuated spraying valve. It is controlled by external solenoid valves or mechanical valves. Remote adjustment is possible by using a second air connection (option). Available nozzle sizes: Ø 0.2 / 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 2.0 / 2.5 mm

Advantages
The spray air volume for the horn air can be adjusted separately, this allows the spray pattern to be adapted to individual requirements at any time – from round jet to 90° flat jet. The raster regulation allows easy adjustment of the material quantity. In the event of a defect in the needle seal, the material does not run into the air duct but out of the unit, thus preventing contamination of the air duct. The spray pattern can be individually adapted via different air cap and nozzle variants.

Main Features

• Pulsating or continuous application of highly viscous media
• Simple adjustment of the material quantity
• Very fast and accurate pulsations
• Available nozzle sizes: Ø 0.2 / 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 2.0 / 2.5 mm

Technical Data
Injection material pressure
max. 10 bar
Control air pressure
3.5–6 bar
Spray air pressure
should be adapted to the pressure of the sprayed material
Length x width x height
50 x 45 x 72.5 mm
Main body
stainless steel
Nozzle + needle
stainless steel
Weight
approx. 305 g

Characteristics / Technical Specifications

• Pneumatically actuated spraying valve
• Controlled by external solenoid or mechanical valves
• Remote adjustment possible (optional second air connection)
• Adjustable spray air volume for horn air
• Spray pattern adjustable from round jet to 90° flat jet
• Easy material quantity adjustment via raster regulation
• Material does not contaminate air duct in case of needle seal defect
• Multiple air cap and nozzle variants for individual spray patterns
• Available nozzle sizes: Ø 0.2 / 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 2.0 / 2.5 mm
• Max. injection material pressure: 10 bar
• Control air pressure: 3.5–6 bar
• Dimensions: 50 x 45 x 72.5 mm
• Main body, nozzle, and needle made of stainless steel
• Weight: approx. 305 g