SIL 3 repeater D5016DS

communicationinterfacecurrent

The Current Repeater D5016 module is a high integrity analog input interface suitable for applications requiring SIL 3 level in safety related systems for high risk industries. It repeats a 2-wire active 4-20 mA current signal input in floating circuit to drive a Safe Area load. The module allows bi-directional communication signals, for HART® devices.SIL 3 / SC 3Input from Zone 0/Div. 1Installation in Zone 2/Div. 24-20 mA Source-Sink OutputHART® compatibleHigh AccuracyThree port isolation, Input/Output/SupplyHigh Density, two channels per unitTechnical DataSupplyVoltage24 Vdc nom (18 to 30 Vdc), reverse polarity protectedCurrent Consumption57 mA @ 24 Vdc with 20 mA out, typical.Power Dissipation1.50 W @ 24 Vdc with 20 mA output on 250 Ω load and 24 Vdc output supply for sink models, typical.InputType4 to 20 mA (separately powered input, voltage drop ≤ 7 V), reading range 0 to 22 mA.HART Impedance225 Ω, typical.OutputType4 to 20 mA.Sink out voltage range2 to 30 V.Load range0 to 500 Ω, with conventional Tx input 250 Ω nom (160 to 500 Ω), with smart Tx input.Current limitation24 mA (up to 450 Ω load) ≤ max current ≤ 26 mA.Response time20 ms (10 to 90 % step change).PerformanceRef. Conditions24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature.Calibration accuracy≤ ± 20 μA.Linearity accuracy≤ ± 20 μA.Temp. influence≤ ± 2 μA/°C.IsolationTest VoltageI.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 V.Environmental conditionsOperating temperaturetemperature limits –40 to +70 °C.Storage temperaturetemperature limits –45 to +80 °C.Safety descriptionEquipmentAssociated apparatus and non-sparking electrical equipment.Safety parametersUo = 8.8 V, Io = 0 mA, Po = 0 mW at terminals 7-8, 9-10 Ui = 30 V, Ii = 100 mA, Ci = 1.1 nF, Li = 0 nH at terminals 7-8, 9-10MountingTypeDIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.Weightabout 115 g.Connectionby polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).DimensionsWidth 12.5 mm, Depth 123 mm, Height 120 mm.Status: ACTIVEChannels: 2CertificationsATEX: UL ATEX D5016 Series English Certificate (Europe, UL 22 ATEX 2892X, UL, 2022-12-19)Ex: D5000 CCC certificate for China (China, 2020322316000978, NEPSI, 2025-06-23)Ex: EAC Ex Certificate for D5000 Series (Eurasian Community, ЕАЭС RU С-IT.AA87.В.01310/24, CCVE, 2024-06-13)Ex: UL-cUL D5016 Divisions and Zones (North America, E222308-20221220, UL, 2022-12-28)IECEx: UL IECEx D5016 Series English Certificate (International, IECEx ULD 22.0034X, UL, 2022-12-19)SIL: TUV IT 25 SIL 0609 A SIL Certificate Summary (International, TUV IT 25 SIL 0609 A, TUV_SUD, 2025-07-29)Declarations of ConformityEU Declaration of Conformity of D5016Declaration of Conformity G3 complianceCharacteristics / Technical SpecificationsProduct: D5016DSType: I.S. SIL3 2-Wire Active HART® Tx Current RepeaterChannels: 2Input: 4-20 mA, HART compatibleOutput: 4-20 mA, Source-SinkMounting: DIN-Rail 35 mmIsolation: Three port (Input/Output/Supply)Operating temperature: –40 to +70 °CDimensions: 12.5 x 123 x 120 mmWeight: ~115 gStatus: ACTIVE