SIL 3 repeater D5016SK
communicationinterfacecurrent

SIL 3 repeater - D5016SK - GM International S.p.A. - communication / interface / current
SIL 3 repeater - D5016SK - GM International S.p.A. - communication / interface / current
Add to favorites
Compare this product

Characteristics

Options
current, communication, DIN rail, isolated, interface, for hazardous areas, HART, SIL 3

Description

The Current Repeater D5016 module is a high integrity analog input interface suitable for applications requiring SIL 3 level in safety related systems for high risk industries. It repeats a 2-wire active 4-20 mA current signal input in floating circuit to drive a Safe Area load. The module allows bi-directional communication signals, for HART® devices.SIL 3 / SC 3Input from Zone 0/Div. 1Installation in Zone 2/Div. 24-20 mA Source-Sink OutputHART® compatibleHigh AccuracyThree port isolation, Input/Output/SupplyHigh Density, two channels per unitTechnical Specifications:Supply: 24 Vdc nom (18 to 30 Vdc), reverse polarity protectedCurrent Consumption: 20 mA @ 24 Vdc with 20 mA out, typicalPower Dissipation: 1.00 W @ 24 Vdc with 20 mA output on 250 Ω load and 24 Vdc output supply for sink models, typicalInput Type: 4 to 20 mA (separately powered input, voltage drop ≤ 7 V), reading range 0 to 22 mAHART Impedance: 225 Ω, typicalOutput Type: 4 to 20 mASink out voltage range: 2 to 30 VLoad range: 0 to 500 Ω, with conventional Tx input 250 Ω nom (160 to 500 Ω), with smart Tx inputCurrent limitation: 24 mA (up to 450 Ω load) ≤ max current ≤ 26 mAResponse time: 20 ms (10 to 90 % step change)Reference Conditions: 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperatureCalibration accuracy: ≤ ± 20 μALinearity accuracy: ≤ ± 20 μATemperature influence: ≤ ± 2 μA/°CIsolation Test Voltage: I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 VOperating temperature: –40 to +70 °CStorage temperature: –45 to +80 °CEquipment: Associated apparatus and non-sparking electrical equipmentSafety parameters: Uo = 8.8 V, Io = 0 mA, Po = 0 mW at terminals 7-8, 9-10; Ui = 30 V, Ii = 100 mA, Ci = 1.1 nF, Li = 0 nH at terminals 7-8, 9-10Mounting: DIN-Rail 35 mm, with or without Power Bus or on custom Term. BoardWeight: about 115 gConnection: by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG)Dimensions: Width 12.5 mm, Depth 123 mm, Height 120 mmChannels: 1Status: ACTIVE
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.