2-way solenoid valve 062 MINSTAC® Outlet VHS®

airstainless steelspring

This 6 mm, 2-way (2/2) dispensing solenoid valve achieves accurate fluid regulation and dispenses precision droplets in the nanoliter to milliliter range when connected to a nozzle. Compatible nozzles thread right into the 062 MINSTAC outlet of this valve, enabling rapid iterative testing of various orifice sizes or spray geometries. This threaded outlet also enables system cleaning and reconfiguration, so the same valve can be used across a wide range of dispense volumes. Available in two inlet port options and several elastomers, these valves are ideal for numerous precision dispensing applications in diagnostics and biotech, including lateral flow strip manufacturing, well plate dispensing, and bioprinting, and for dispensing coatings and sealants in industries such as semiconductor manufacturing. Each valve is customizable and 100% tested to ensure performance. - Key Product Facts - Dispense Volumes: As low as 10 nL - High Speed: 250 µs response time and up to 1 kHz operation - Low Internal Volume: As low as 35 µL - Long Cycle Life: 250 M cycles min - Operating Pressure: Up to 120 psig General Performance - Inlet Port Options: Barb Inlet: For use with 1/32" ID flexible tubing - MINSTAC® Inlet: For use with threaded tubing assemblies and safety screens - Operating Pressure: 0 - 120 psig - Cycle Life: 250 M Cycles Min - Recommended Filtration: 12 Microns or Finer - Dispensing Frequency: Up to 1000 Hz - Operating Temperature: 40°F to 120°F (4°C to 49°C) - Max Internal Coil Temperature: 150°F (66°C) - Storage Conditions: Temperature: -40°F to 175°F (-40°C to 80°C) - Relative Humidity: 85% Max, Non-Condensing - Weight: < 2 grams - Internal Volume: 35µL: Barb Inlet Valves - 40µL: 062 MINSTAC Inlet valves Materials - Seal Options: EPDM, FKM, or FFKM - Armature & Plunger Stop: 430 Stainless Steel or FeCR - Spring: 316 Stainless Steel - Housing: PEEK or PPS - Minstac Inlet & Outlet Ports (M): PEEK - Barb Inlet Port (P): 430 Stainless Steel or FeCR Accessories & Installation - MINSTAC product line offers tubing assemblies, check valves, safety screens, filters, adapters, and unions for fluidic connection. - Several interchangeable dispense and atomizing nozzles available, directly threaded into the 062 MINSTAC outlet. - Three types of standard nozzles: Orifice (integrated sapphire), Hypodermic Tube, Atomizing (fine mist, 50° angle). - Custom manifolds available for system integration. VHS Valve Evaluation Kit - Includes: VHS Series Valve (M/M configuration, EPDM, 24V), Spike and Hold Driver, multiple dispense nozzles, atomizing nozzle, safety screen filter, adapters, tubing assembly, torque wrench, lead wire assembly, valve mounting clip. Recommended Pressure Source - Piezoelectric Micropumps are recommended for precision dispensing with a VHS Series valve, enabling pressure-driven flow or air displacement regimes for precise droplet control. Part Numbers & Specifications - Part Number: INKX0511400A - Inlet: 062 MINSTAC - Seal Material: EPDM - Spike, Hold Voltage (Vdc): 12, 1.6 - Min Spike Duration (ms): 0.35 - Operating Pressure (psig): 0-120 - Lohm Rate (Cv): 4750 Lohms (0.004) - Internal Volume (µL): 40 - Configuration: M/M Technical Specifications / Features: - Valve Type: 2-way (2/2) dispensing solenoid valve - Size: 6 mm - Dispense Volume: As low as 10 nL - Internal Volume: 35-40 µL - Response Time: 250 µs - Cycle Life: 250 million cycles minimum - Operating Pressure: Up to 120 psig (some models 0-30 psig) - Operating Temperature: 4°C to 49°C - Weight: < 2 grams - Seal Materials: EPDM, FKM, FFKM - Housing: PEEK or PPS - Inlet Options: Barb or MINSTAC threaded - Outlet: 062 MINSTAC threaded - Recommended Filtration: 12 microns or finer - Electrical: Spike and hold drive required (12/24 VDC options) - Customizable and 100% tested