ball bearing / single-row / steel / with cage
23800

{{requestButtons}}

Characteristics

  • Rolling element:

    ball

  • Configuration:

    single-row

  • Material:

    steel

  • Other characteristics:

    with cage

  • Inside diameter:

    Max.: 50 mm

    Min.: 3 mm

  • Outside diameter:

    Max.: 110 mm

    Min.: 10 mm

  • Width:

    Max.: 27 mm

    Min.: 4 mm

Description

Deep groove ball bearing FAG single row

Material:
Inner ring, outer ring and rolling elements, bearing steel.
Cage sheet steel.
Labyrinth seal sheet steel. Lip seal NBR.

Version:
2Z = sealed both sides with non-contact labyrinth seals.
2RSR = sealed both sides with contact lip seals.

Note:
Deep groove ball bearings accept high radial and axial loads. Axial loads are absorbed in both directions. The versions 2Z and 2RSR are lubricated for life with a high quality grease.

The main dimensions of the deep groove ball bearings conform to DIN 625-1. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. The radial internal clearance corresponds to the clearance CN acc. to DIN 620-4. These tolerance classes are standard and well suited for most applications.

Temperature range:
-30 °C to +110 °C.

On request:
Open deep groove ball bearing.
Other dimensions and versions.