Explosion vent panel BESS.TGV

Explosion vent panel - BESS.TGV - REMBE® GmbH Safety+Control
Explosion vent panel - BESS.TGV - REMBE® GmbH Safety+Control
Explosion vent panel - BESS.TGV - REMBE® GmbH Safety+Control - image - 2
Explosion vent panel - BESS.TGV - REMBE® GmbH Safety+Control - image - 3
Explosion vent panel - BESS.TGV - REMBE® GmbH Safety+Control - image - 4
Add to favorites
Compare this product

Description

Short description
Innovative side-wall deflagration venting enabling flexible installation on Battery Energy Storage Systems (BESS). The BESS.TGV is designed to be mounted on a side wall: it limits the vent panel opening angle and redirects deflagration pressure, flame and heat upwards to a defined safe area.

Application
BESS.TGV allows designers to avoid conventional roof venting constraints such as snow and hail loads, to free roof area for equipment, and to enable container stacking while complying with venting requirements.

Advantages
  • Limits opening angle to 45° to control deflagration direction.
  • Reduces required safety area around the installation.
  • Permits side-wall installation on BESS containers.
  • Slim profile < 15 mm allows close flush mounting and container stacking.

Mechanism
The device limits the explosion vent opening angle and channels the pressure wave, flames and heat into defined zones, minimising dispersion and lowering the extent of protected zones required.

Applications + Industries
  • Battery Energy Storage Systems (BESS)

Certifications
  • Meets the requirements of NFPA 68
  • SIL-Equivalent: SIL 4

Technical data (table)
Burst pressure Pstat: 25-500 mbar
Max. permitted operating pressure: 50% of Pstat
Temperature range: –40 to +180°C (–40 to +356°F)
Material: Stainless steel
Gasket material: FDA approved silicon gasket
Tolerance: ±20% at standard burst pressure
Recommended torque for M10 screws: 20 Nm
Insulation: FEF
Fire rating of insulation: UL 94 V 0
Insulation thermal conductivity: λ = 0.035 W/m*K
Opening angle: 45°

Characteristics / technical specifications
  • Burst pressure Pstat: 25-500 mbar
  • Max. permitted operating pressure: 50% of Pstat
  • Temperature range: –40 to +180°C (–40 to +356°F)
  • Material: Stainless steel
  • Gasket material: FDA approved silicon gasket
  • Tolerance: ±20% at standard burst pressure
  • Recommended torque for M10 screws: 20 Nm
  • Insulation: FEF
  • Fire rating (insulation): UL 94 V 0
  • Insulation thermal conductivity: λ = 0.035 W/m*K
  • Opening angle: 45°

Catalogs

No catalogs are available for this product.

See all of REMBE® GmbH Safety+Control‘s catalogs

Exhibitions

Meet this supplier at the following exhibition(s):

Intersolar 2026
Intersolar 2026

23-25 Jun 2026 Munich (Germany) Hall B2 - Stand 575

  • More information
    *Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.