- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Level switch >
- Barksdale
Barksdale level switches
The tuning fork level switch has piezoelectric components, which are used for driving and signal feedback to cause resonance of the probe. When a material level comes into contact with ...
RETTAR
Process temperature: -40 °C - 130 °C
Process pressure: 0 bar - 20 bar
The tuning fork level switch has piezoelectric components, which are used for driving and signal feedback to cause resonance of the probe. When a material level comes into contact with ...
RETTAR
Process temperature: 550 °C
Process pressure: 20 bar
The electrode rod of the RF admittance level switch is composed of a measuring electrode, a shielding electrode, and a grounding electrode. The three electrodes are isolated by insulating materials. When ...
RETTAR
Process temperature: -20 °C - 150 °C
Process pressure: 10 bar
... magnetic reed switch contacts or a reed switch chain transmitter. One or more floats, free to slide along the guide tube, magnetically act on the contacts positioned at the intervention points, switching ...
Riels Instruments
Process temperature: -40 °C - 135 °C
Process pressure: -1 bar - 100 bar
... the event of a fluctuating level, for example when filling the tank. Compensation for foam, bubbles and condensation as well as for sticky fluids can be set in the Flex Programmer software. The CONTACT-RLBFI level ...
Riels Instruments
Process temperature: -20 °C - 120 °C
Process pressure: 10 bar
The RIL210 float level switch can be used for dirty liquids, water, petroleum, refrigerant oils. It tolerates the presence of metal particles, including ferrous ones, since the float does not carry a ...
Riels Instruments
The Sonocontrol 15 by Sonotec Ultraschallsensorik Halle GmbH is a Non-intrusive ultrasonic level switch designed to detect whether a tube is filled with liquid or liquefied gas. It features its performance ...
Process temperature: -10 °C - 120 °C
Process pressure: 0 bar - 20 bar
Bilge Level Switch Body entirely AISI 316 L stainless steel Maximum operating pressure 20 BAR Maximum operating temperature -10 / + 120 ° C Average specific weight> = 600Kg / m3 SPDT exchange contact ...
ASIT ITALIA
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
The level switch is suitable for fluids in general, particularly used in the naval, chemical and aqueduct sectors. Our model AI.LSoem, is composed of a float totally in AISI 316 of di- dimensions 30x36mm, ...
ASIT ITALIA
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
The level switch is suitable for fluids in general, particularly used in the naval, chemical and aqueduct sectors. Our model AI.LSOEM.W, is composed of a float totally in AISI 316 of dimensions 30x36mm, ...
ASIT ITALIA
Process temperature: 0 °C - 70 °C
The WBF33A30-0 Series, manufactured by Comus Group®, which has a 240 Vac voltage switch that can hold a 100 Watts maximum 10 Watts in a minute and has a solid state output resistance. Furthermore, it has a 30° degrees ...
The Comus Group
Process temperature: -10 °C - 128 °C
The VFS30 is a reversible float switch manufactured by Comus. It features a stainless steel SUS304 construction, and dimensions of 60.0x28.0mm. The switch has a voltage rating of 200V AC to 240V AC. ...
The Comus Group
Process temperature: -10 °C - 120 °C
The VFS75 is a stainless steel float level manufactured by Comus. This device is made of SUS303 stainless steel and features a contact form which is normally closed. It runs on a maximum switching voltage of 250V AC. ...
The Comus Group
Process temperature: -40 °C - 400 °C
Process pressure: -1 bar - 100 bar
GCAS level switch is a capacitive level sensor used for level control in conductive liquids, low conductivity liquids, powdery materials with solid particles, sticky ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Process temperature: 0 °C - 125 °C
... the reed sensor. These changes of reed sensors, alarm or level information can be evaluated with a relay circuit or control device. It is preferred by users because the relay output ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
VIBRATING LEVEL SWITCH R 1 1/2" Male Thread 250mm 24VAC / VDC
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Process temperature: -50 °C - 250 °C
Process pressure: 16 bar
● First made-in-China Vibrating Rod Level Switch that is designed with double vibration rods. ● High sensitivity thanks to the fine adjustment on the resonant vibration frequency; suitable for virtually ...
China Shenzhen Jiwei Automations Ltd.
Process temperature: -40 °C - 250 °C
... Admittance Level Switch can detect capacitance as well as impedance between probe and vessel. It is flexible for various applications while consistently demonstrating immunity to buildup, especially for ...
China Shenzhen Jiwei Automations Ltd.
Process temperature: -50 °C - 250 °C
Process pressure: 0 bar - 25 bar
... Particularly suits for level measurement of powdery, fine-grained bulk solids, can effectively avoid buildup. ● With the suspension cable, Fork-11 can be applied in tall and narrow silo. ● Industry-leading performance ...
China Shenzhen Jiwei Automations Ltd.
Process temperature: -10 °C - 60 °C
The level controls propeller indicators SEM are employed for level control in tanks that contain powders or granulars. The indicators working is very simple: a synchronous motor that rotates at low speed ...
FIAMA
Process temperature: -10 °C - 90 °C
Maximum inclination: 15° Max viscosity of the fluid: 150 cSt Mechanical life: 106 cycles at 20°C Body: in anodized aluminium with wetted part in stainless steel 316L (rod) and spancil pom (float) Installation: must be least at ...
Fox S.r.l.
Process temperature: -25 °C - 70 °C
Process pressure: 40 bar
... manufactured by Aplisens, is a level switch equipped with an explosion proof version. It has a protection class of IP 66/68, nominal pressure capacity of 40 bar and 321SS wetted parts. This level ...
... the ordering code. There is also a possibility of ordering the level swicth with connector according to the requirements, e. g. with flange acc. to DIN or ANSI standard. The level switch ...
Process temperature: -40 °C - 80 °C
Process pressure: 0 bar - 25 bar
Fafnirs LS300 Ex Steck is generally used for operations that require more than a single-point level for process management, or added overfill stoppage. This switch comes in a version with an integrated ...
FAFNIR
Process temperature: -25 °C - 80 °C
The Laboratory LS Series, manufactured by Fafnir, is an explosion proof calorimetric level switch equipped with a PTC resistor. It has a maximum pressure capacity of 25 bar and maximum operating temperature ...
FAFNIR
Process temperature: -25 °C - 80 °C
Process pressure: 0 bar - 2 bar
The 76 DUO series from Fafnir is a thermal overfill prevention device that is especially designed to comply with the German Water Resources Act (WHG). This easy to use model combines 76A with NB 220 to prevent tank overfill and liquids ...
FAFNIR
The Plastic Float Switches have the following Features: - M 16x2 and 1/2" NPT - 1 NO, NC or change over - Temperature range upto +70°C - max. 3bar - IP65
Jacob GmbH
Process temperature: 0 °C - 60 °C
The Level Switches have the following Features: - 2 to 30 m cable - 1 Change over - 10 A (250 VAC), 4 A (30 VDC) - Temperature range 0°C to +60°C - IP68 (40 m) - Option: without counterweight
Jacob GmbH
Process temperature: -40 °C - 150 °C
The Magnetic Switches in the round housing have the following Features: - ø8 and 12 mm - Threads M8, M10, M12, PG7 - PVC- and Silicone-cable - M12-connector - max. 1 NO or NC, change over - overall length: 30 to ...
Jacob GmbH
Process temperature: -20 °C - 80 °C
Process pressure: 0.5 bar - 1.8 bar
They are used for the level control in containers holding product in powder or granule form in potentially explosive environment in Category 1/2 dusty environments D (zone 20/zone 21). The functioning is based on the ...
AECO
Process temperature: -10 °C - 60 °C
Its functioning is due to the pressure created by a product on the rubber membrane which activates a fast acting microswitch. The sensitivity of the switching can be adjusted by means of a screw placed on the lid of the unit, adjustment ...
AECO
Process temperature: -20 °C - 150 °C
Magnetic float level controls for liquids are made of a reed contact placed inside the shaft and an operating magnet placed in the float which runs due to the increase or decrease of the liquid to detect. The ...
AECO
Process temperature: -40 °C - 115 °C
Small High Frequency Level Switch: the ideal solution for sticky liquid, such as chocolate sauce, condensed milk or yogurt. It can be used for the powder. It features with Auto-Learning function and the ...
EMA ELECTRONICS LTD.
Process temperature: -40 °C - 200 °C
Process pressure: 40 bar
LC series smart High-Frequency Level Switch is developed by EMA for many years. It has reached to a new standard in terms of cost-effectiveness and reliability. In the process of industrial ...
EMA ELECTRONICS LTD.
Process temperature: -20 °C - 200 °C
Process pressure: 10 bar
Suitable for liquid Point to Point level measurement Side-mounting Simple operation and easy installation NO or NC output The user can choose LS0003 against strong acid/alkali liquid It is reliable over 2 million working cycles
EMA ELECTRONICS LTD.
Process temperature: -30 °C - 60 °C
Process pressure: -0.5 bar - 10 bar
... rooftop of the angle arm. BACKGROUND Stepper motor technology has proven its worth in the space industry and long-term tests in the automotive industry since all functional parameters can be adjusted. ...
MBA Instruments GmbH
Process temperature: -30 °C - 60 °C
Process pressure: -0.5 bar - 10 bar
Thanks to the new product series semi rotating paddle MBA801 with a halfpipe, the modern level measuring devices with stepper motor technology can now be used for even more special applications in bulk materials. The ...
MBA Instruments GmbH
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 10 bar
... Deposits are effectively prevented due to the sword-like shape of the vibrating paddle. BENEFITS FLEXIBILITY 3 sensitivity levels and 2 switching options (full and empty) STABILITY Can be used with separation ...
MBA Instruments GmbH
Process temperature: -20 °C - 80 °C
• Deposit level control • Magnetic float • With PP or PTFE cable • Counterweight, elbows and pulleys • Simple installation • For mounting level indicators with cable or float. • Filling level ...
Process temperature: 0 °C - 70 °C
Process pressure: 2 bar
... for 1 or 2 filling levels • Simple installation by G 1˝ housing thread or DN 25 tube clamp • Operation voltage 24 VDC / casing head IP 67 Applications • Level sensor with 2 probes as a minimum or ...
Process temperature: 0 °C - 90 °C
Process pressure: 10 mbar
... Construction of chemical facilities • Construction of industrial facilities Use • Used to monitor fluid levels in pressureless containers or open pits • As a marker in case a fixed fill level ...
Process temperature: -30 °C - 130 °C
Process pressure: 0 bar - 50 bar
... that, for variety of materials and dimensions, offers to the user a simple and economical solution forthe control of liquid levels. The units are available with connection cable in lengths of 1.5 m and 3.0 m, other lengths ...
VAL.CO srl
Process temperature: 0 °C - 90 °C
Process pressure: 0 bar - 4 bar
... the OEM market that, for material and size, it offers to the user a simple and economical solution to control the liquid level. The unit is supplied with 500 mm leads length; other lengths are available on request. ...
VAL.CO srl
Process temperature: -30 °C - 105 °C
Process pressure: 0 bar - 30 bar
Level controls with 1 electrical contact, reliable, compact and easy to install. Designed to offer a range of level switches to meet the request for a cheap monitoring of the level in ...
VAL.CO srl
Process pressure: 2 bar - 6 bar
Our Float Switch with Pneumatic Output (Float Switch) is designed to be mounted into the top of a tank into which access is possible to secure the locknut and float. The float switch ...
Rotary paddle level switches are mainly used to regulate the supply and demand of material found in hoppers and bins. The are capable of detecting and regulating the number of materials supplied in a broad range of procedures. ...
TARNOS level switches are used to control the supply and demand of material, in hoppers, bins, etc. They detect and regulate automatically the quantity of product to be supplied in a great variety of processes. TARNOS ...
Process temperature: -40 °C - 399 °C
Process pressure: 0 bar - 2 bar
Monitor's KA / KAX line of rotary paddle bin level indicators consist of the most reliable, rugged and economical point level control sensors available for detection of dry bulk materials. ...
Monitor Technologies
Sleek and rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover, which protects against debris and jamming. 14 gauge highly abrasive resistant marine grade wire, and a built-in ...
RULE INDUSTRIES
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 1 bar
... cost polypropylene level switch - Hermetically moulded, double chamber - Mercury free operated micro switch - Adjustable switch differential - Low specific ...
NIVELCO Process Control Co.
Process temperature: -20 °C - 200 °C
Process pressure: 25 bar
series single-point conductive probes operate up to 200 °C and 25 bar ATEX version
Comeco Control & Measurement
Process temperature: -10 °C - 80 °C
Euroswitch
Process temperature: -40 °C - 90 °C
Process pressure: 0 bar - 2 bar
Point Level Sensors provide simple low tank level input for controllers and solenoid metering pumps. They can be used to stop your metering pump when chemical level is low or for direct ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining