BONDIOLI PAVESI hydraulic motors

Pressure: 0 bar - 400 bar
Rotational speed: 3,400 rpm - 8,800 rpm
Displacement: 5 cm³ - 130 cm³

Compact Design, Economical Conception. High Power Density, High Overall Efficiency, High Rotating Speeds. High Output Pressure, Simple Change of Direction of Rotation, For Industrial & Mobile Market. Splined or Keyed Shaft.. 2PS ISO Bent ...

Pressure: 270 bar
Rotational speed: 700 rpm - 4,500 rpm
Torque: 0 Nm - 16 Nm

Integral gear with 12 teeth. Available with flanges, shafts and ports for the main European and American standards.

Pressure: 400 bar
Rotational speed: 3,600 rpm - 6,300 rpm
Torque: 126 Nm - 1,016 Nm

Piston motors interchangeable to A2FM Rexroth HA2FM Hydraut fixed displacement axial piston motors are suitable for mobile and industrial applications and for open or closed loop circuits. This motors ...

Pressure: 0 bar - 450 bar
Rotational speed: 0 rpm - 4,160 rpm
Torque: 329, 439, 567 Nm

- High pressure hydraulic motor for hydrostatic transmissions - Low noise level - High efficiency Fixed displacement axial-piston motors in swashplate design for closed and open ...

Pressure: 155, 172, 34 bar
Rotational speed: 2,400, 3,000, 4,000, 3,600 rpm
Torque: 3.3 Nm - 20.9 Nm

... diametrically opposed which results to balanced radial loads. Therefore, motors are also hydraulically balanced that helps to reduce wear and heat from friction. Motors are bi-rotational and provide ...

Pressure: 0 bar - 170 bar
Rotational speed: 0 rpm - 3,000 rpm
Displacement: 12 cm³ - 41 cm³

Cast iron body; max working pressure 170 bar; max driving speed 3.000 rpm, displacement from 12 up to 41 cc; SAE mounting flanges and driving shafts.

Rotational speed: 0 rpm - 1,500 rpm

SPEED VARIATOR FEATURES RELIABILITY Stoutness and reliability guarantee long life. PERFORMANCES High torques at low speed, accurate and continuous speed adjustment. Frequent startings under load RESISTANT A system designed ...

Pressure: 350, 400 bar
Rotational speed: 2,700 rpm - 5,600 rpm
Torque: 681, 1,019, 1,391 Nm

Rexroth Hydraulic Motor Model A6VE Series Replace for Rexroth A6VE Series hydraulic motor Displacement 107cc - 250cc/rev The hydraulic ...

Pressure: 21, 26, 31 MPa
Rotational speed: 385, 577 rpm
Torque: 540, 665 Nm

... smooth and reliable operation. * The new series motor is suitable for vehicles with greater loads and pressure drop. - Matters needing attention - Output steering - The correct use of the motor ...

Pressure: 90 bar - 140 bar
Rotational speed: 400 rpm - 1,950 rpm
Torque: 11 Nm - 45 Nm

This gerotor set comes with a spool valve integrated with an output shaft, supported by hydrodynamic bearings. In addition to this, the MM series of products also ensures a distribution valve that is integrated into the output shaft. ...

Pressure: 350 bar
Rotational speed: 216 rpm - 1,000 rpm
Torque: 3.3 Nm - 261 Nm

The SMA motor is able to satisfy the heaviest duty application. This is a radial piston/eccentric motor with a hydrostatically balanced rotating assembly. The efficient design includes a hardened high ...

Torque: 640 Nm
Displacement: 25 cm³ - 624 cm³

Displacement from 25 to 623,6 ccm/REV Maximum rotation speed: 1815 RPM Max. torque: 640 Nm Different flange and shaft types available Special versions EPML with front bearing and short version EPM-K available

Rotational speed: 0 rpm - 2,000 rpm
Displacement: 98 cm³ - 246 cm³

Eight fixed displacement motors ranging from 6 in3 to 15 in3. Starting and stall torques equal to 90-94% of theoretical torque. Speed to 2,000 RPM continuous. Up to 75 HP continuous. Conforms to SAE 'C' ...

Rotational speed: 0 rpm - 2,255 rpm

... design, these hydraulic motors lend themselves to a host of potential applications. Lamina's gerotor hydraulic motors are available in 6 sizes, with different torques ...

Displacement: 4 cm³ - 20 cm³

Displacement: 3.85 - 5.54 - 15.24 - 19.91 cm3/rev Available in Atex version

Pressure: 17,500,000, 20,000,000 Pa
Rotational speed: 970 rpm
Torque: 610, 690 Nm

GR Series Orbit Motor The GR series orbit motor is equipped with a spool valve and an integrated design with a distribution valve and output shaft. The universal shaft drives the distribution valve ...

Rotational speed: 1 rpm - 1,000 rpm
Displacement: 59 cm³ - 4,298 cm³

... INM series motors are developed based on Italian technology and incorporated design variations intended to increase the strength of the motor casings and load capacity of internal dynamic components. ...

Pressure: 250 bar
Rotational speed: 3,600, 800 rpm
Torque: 8.6 Nm - 19,320 Nm

high-quality hydraulic pumps and motors to suit a wide range of applications. What is your application? Which hydraulic pump or motor would best serve your purpose? Which ...

Pressure: 130 bar
Rotational speed: 280 rpm
Torque: 260 Nm

Hydraulic motor and hydraulic power packs With more than 20 years' research and production of the portable machines,such as pipe cutting & beveling machine and the Flange facing machine, ...

Pressure: 330, 320, 370, 350 bar
Rotational speed: 300 rpm - 2,600 rpm
Displacement: 34 cm³ - 130 cm³

Pressure: 1,800, 2,400 psi
Rotational speed: 760, 904 rpm

This 4.8 in. cubic hydraulic motor is used as a replacement hydraulic motor on PS654-HK winches. PRODUCT SPECIFICATIONS: -Disp.4.8 in. / rev. -Torque: ...

Pressure: 350 bar - 400 bar

... Axis Piston Motor – MBIF Series • - Higher Pressure • - Compact Design • - High Reliability • - Bidirectional Iron Cast Piston Motor – MBIF series Iron Cast Piston Motor ranging ...