EBMPAPST aluminum fans
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Air flow: 4,987 m³/h - 237,000 m³/h
Diameter: 280 mm - 2,000 mm
Rotational speed: 750, 500, 1,500, 1,000, 3,000 rpm
Axial duct fans. Standard low-pressure fans popular in most duct ventilation systems. Planetfan produces the largest range of duct fans manufactured in Poland in terms of available diameters. • ...
Planetfan
Air flow: 2,910 m³/h - 39,315 m³/h
Diameter: 315 mm - 1,000 mm
Rotational speed: 3,000, 1,000, 1,500 rpm
High-temperature axial fans. Used in installations where the temperature of the flowing air can reach up to +105°C. Equipped with a special motor and impeller. Designed for continuous operation at high temperatures. • ...
Planetfan
Air flow: 5,470 m³/h - 24,405 m³/h
Diameter: 400 mm - 710 mm
Rotational speed: 1,500, 3,000 rpm
Wall-mounted fans for mounting on the walls of industrial and large-volume rooms. They transport air in low resistance installations. Often used to evacuate large quantities of warm air accumulated in summer under the ...
Planetfan
Air flow: 8 m³/h - 1,660 m³/h
Rotational speed: 2,500 rpm - 4,800 rpm
Noise level: 24 dB - 75 dB
Die-cast aluminium or PBT body, motor with thermal, electronic or impedance protection. Costech fans can satisfy specific industrial requirements with different sizes, air flow rate and pressure versions. •Costech ...
Air flow: 1,325 m³/h - 100,000 m³/h
... to Ø 1250 mm diameter Hot dip galvanized sheet metal fan casing Cast aluminum adjustable blade angle impellers Aerodynamic profiled impellers allow high efficiency and low noise Die ...
Venco Havalandirma
Air flow: 548 m³/h - 1,597 m³/h
Noise level: 84 dB - 90 dB
... FEATURES & ADVANTAGES: • Available in three models offering 560-940 cfm (951-1,597 m3/hr) • Direct-drive 3,500 RPM fan motor • Cast aluminum fan and housing provides spark-resistant ...
COPPUS
Diameter: 800 mm - 4,800 mm
... produced in three versions: • AFTE: motor mounted outside the fan and airflow • AFTS: with vertical axis, motor mounted under the fan ring, on a bridge (for aircoolers) • AFTN: motor inside the fan ...
comet fans
Air flow: 21 m³/min - 73 m³/min
Diameter: 25, 30, 40 cm
Rotational speed: 1,400, 1,650 rpm
... horizontally, vertically and in various other positions, including obliquely. The manufacturer has also included ventilating fans, which you can use in machinery, factories, toilets, offices and even foundry shop fume ...
Chuan-Fan Electric
Air flow: 2,190 m³/h - 160,000 m³/h
Diameter: 315 mm - 2,000 mm
... QUALITY STEEL SHEET The casing of the duct fan is made of high quality sheet steel and powder coated black according to the applicable standards. The fan has a modular impeller consisting of an aluminum ...
KS Ventilatoren
Air flow: 0 m³/s - 1.53 m³/s
Diameter: 300 mm
Rotational speed: 5,000 rpm
Stationary pneumatic axial fan with 300 mm nominal diameter for various ventilation work. Suitable for e. g. tank aeration, cleaning work and many other applications in explosive areas. Earthing required.
... extractors. With ATEX certificate and Ex d motor. Cast aluminum propeller. • Engine-propeller air direction. • Explosion-proof cable gland included. • Sheet steel support frame, with aluminum ...
A2S Advanced Safety Solutions
• Cast aluminum propeller. • Engine-propeller air direction. • Explosion-proof cable gland included. • Sheet steel suction ring with aluminum strip on the propeller area according to standard EN-1486 ...
A2S Advanced Safety Solutions
... certificate and Ex e, Ex d, Ex tc or Ex tb motors. Designed to work in explosive atmospheres with risk of gas or dust. • Cast aluminum propeller. • Engine-propeller air direction. • Non-sparking cable gland included. • ...
A2S Advanced Safety Solutions
Air flow: 18,689 m³/h - 28,713 m³/h
Diameter: 508, 610 mm
... of paints an coatings Rugged aluminum housing and fan blade meet demanding ventilation requirements. RF design using action-reaction principles; compressed air is discharged through nozzles located ...
Air flow: 0 m³/h - 3,700 m³/h
... direct-mount fan for Plymovent's systems The FUA series ventilation fans are designed for direct mounting on our metal- and hose tube extraction arms and filters or for use as central fans. ...
Air flow: 0 m³/h - 12,000 m³/h
... series ventilation fans are designed for use as central fans. These fans are equipped with lightweight aluminium impellers, suited to exhaust gases, volatile fumes and ...
Air flow: 89, 75 m³/h
Rotational speed: 3,100, 3,200, 2,700, 2,650 rpm
Noise level: 41, 42, 37, 36 dB
... efficient fan expertise ebm-papst axial fans are suitable for high air performance with medium pressure increase. The air flows through the fan blades in parallel with the axis of rotation. ...
ebm-papst
Air flow: 0.18 m³/min - 15.46 m³/min
Splash Proof Fan Series - San Ace 9W provides Air flow of 0.183m3/min (6.5CFM) to 15.46m3/min (546CFM). Size of 40mm square to 140mm square and diameter 172mm side cut. It features PWM control, pulse sensor, lock sensor ...
Air flow: 0.16 m³/min - 9 m³/min
12, 24, 48VDC Air flow : 0.16m3/min (5.65CFM) to 9m3/min (318CFM) Size : 40mm square to 172mm round ( 7 frame sizes ) Options : PWM control, pulse sensor, lock sensor Life expectancy (60°C-L10) : 60 000 to 200 000 hours
Air flow: 0.52 m³/min - 6.3 m³/min
DC Axial Fan Wide Temperature Range Air flow: from 0.52 m3/min (18.4CFM) to 6m3/min (211.8CFM) 6 models from 40 to 120mm square by 25, 28 or 38mm thick are available. With an operating temperature range of -40°C ...
Air flow: 62,000 m³/h
FC series Product specification: Aerofoil section aluminium die-cast blade for use in aerodynamically designed air duct systems, available in full bell mouth plate design and cased design. Available dimensions 315 ...
ZIEHL-ABEGG
Air flow: 325 m³/h - 1,600 m³/h
Diameter: 80 mm - 133 mm
ECOFIT Cross flow fans AC single phase motor Aluminum impeller, Impeller diameter of 80 up to 133mm, AC single phase capacitor external rotor motor 230V50/60Hz, Maximum airflow of 325 up to 1600m3/h, ...
ROSENBERG VENDÔME
Air flow: 900 l/s
ETRI High Performance Fans Axial and centrifugal fans for use in severe environment: tropicalized, salt spray, high vibrations, shocks,… When the required pressures are particularly high, very compact ...
ROSENBERG VENDÔME
Air flow: 970 l/s
ETRI 400Hz FANS Axial and centrifugal fans for use in severe environment : tropicalized, salt spray, high vibrations, shocks,… Axial fans with impeller in plastic or aluminium Motors ...
ROSENBERG VENDÔME
Air flow: 142 m³/min
... pressure blowers. They provide air flow up to 142 m³/min and a pressure difference 10,600 Pa. They have a housing made of cast Aluminium and impellers primarily bent backwards and made of Aluminium. The blowers are mostly ...
Air flow: 0 ft³/min - 130,000 ft³/min
NYB AF-50 Fans extend the pressure capabilities of backward inclined fan designs to the higher pressures found in heavy industrial-process applications such as boiler forced-draft, combustion air, solvent ...
NYB
Air flow: 220,000, 330,000, 460,000 m³/h
Diameter: 29.6, 46, 52.5 in
Rotational speed: 100, 80, 60 rpm
Our circulation fans provide uniform temperature throughout your tunnel, greenhouse or commercial warehouse. With our circulation fans you will reduce heat stress, improve plants and animals production ...
Air flow: 3,180 m³/h - 44,430 m³/h
Diameter: 470 mm - 1,340 mm
Rotational speed: 385 rpm - 1,460 rpm
... diameters ranging from 18" to 53". Noise levels are low and efficiency is high. The body is available in galvanized or stainless steel for maximum corrosion resistance. Ideal for use in farms, greenhouses and industrial buildings.
Air flow: 9,600 m³/h - 52,500 m³/h
Diameter: 638 mm - 1,385 mm
Rotational speed: 393 rpm - 942 rpm
... direct-drive, belt-driven or cone-driven. Noise levels are low and efficiency is high. The body is available in galvanized or stainless steel for maximum corrosion resistance. Ideal for use in farms, greenhouses and industrial ...
Air flow: 29.71, 35.65, 41.6, 47.54 m³/h
Diameter: 1.5, 2, 2.5, 3 m
Rotational speed: 70, 95, 130, 180 rpm
Leisure Life in Urban Area SUNON HVLS Fan has a lighter and stylish look. The airfoil combines aircraft-grade aluminum with a patented winglet design, it reduces the wind resistance and wind noise. Suitable ...
Air flow: 90,000 m³/h
Diameter: 200 cm
Rotational speed: 285 rpm
SUNON Portable HVLS Fan is designed to be easily move by a person through the work areas. 2M fan generates powerful airflow to enhance better ventilation and reduce human body temperature. Using SUNON ...
Air flow: 147.5 m³/h - 925 m³/h
Rotational speed: 2,760 rpm - 2,910 rpm
... execution Special executions for higher temperatures. Construction features: particularly strong construction fan with cast aluminum scroll, steel impeller statically and dynamically balanced ...
Ducted helical fan with nylon-glass impeller and alternatively cast aluminum impeller. Suitable for moving large volumes of air at low pressure even in the presence of dust or fumes. Maximum air temperature: ...
Diameter: 300 mm - 1,250 mm
... shielded PA (PAM) Hubs: AISI 316 or 304 stainless steel Die cast aluminum alloy Balancing according to ISO 1940 standard Casing: Painted S235JR carbon steel AISI 316 stainless steel AISI ...
HW Ventilation
Diameter: 300 mm - 1,102 mm
F plastic fans are manufactured assembling variable pitch, slightly sickle profile blades with a light aluminum alloy hub. The fans are the best choice to suit a variety of applications ...
HW Ventilation
Diameter: 450 mm - 1,282 mm
C plastic fans are manufactures assembling variable pitch, slightly sickle profile blades with a light aluminum alloy hub. The fans are the best choice to suit a variety of applications ...
HW Ventilation
Air flow: 11.32 l/min - 122,742.65 l/min
Diameter: 30 mm - 220 mm
These powerful, low-noise fans come with excellent energy efficient ratings and are particularly suitable for industrial applications and electronic components where high volumetric air flows are required. CTX offers ...
Air flow: 21,000 m³/h
Diameter: 200 mm - 630 mm
Properties • flow rates up to 21,000 m³/h • size: 200 - 630 mm (impeller diameter) • casing made of galvanised sheet steel • casing position: LG or RD • IEC standard motor, IP55, thermal class F • backward curved impellers • terminal ...
Rosenberg Ventilatoren GmbH
Air flow: 32,000 m³/h
Diameter: 500 mm - 1,000 mm
... sickle formed profiled impellers made of cast aluminium • integrated control system (EC controller) • speed is 100% infinitely variable Properties Sickle formed profiled impellers made of cast aluminium ...
Rosenberg Ventilatoren GmbH
Air flow: 24,000 m³/h
Diameter: 500 mm - 1,000 mm
... profiled impellers made of cast aluminium • terminal box design; alternatively, lateral or axial cable outlet • protection class IP54, thermal class F Properties Sickle formed profiled impellers made of cast aluminium ...
Rosenberg Ventilatoren GmbH
Air flow: 3,000 m³/h - 28,000 m³/h
Diameter: 400 mm - 1,250 mm
Rotational speed: 270 rpm - 1,440 rpm
... is mainly composed of the impeller, motor, air duct and cover net. To be specific, the impeller is made of high-strength aluminum alloy sheet by molding. The motor is outdoor type with protection class IP 55 (or 56) ...
ERG Technology
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining