- Hydraulics - Pneumatics >
- Valve >
- Abrasive fluid valve >
- EBRO
EBRO abrasive fluid valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 15 mm - 1,050 mm
Pressure: 20 bar - 420 bar
The Super-H Lubricated Plug Valve is a rugged, pressure balanced plug valve designed for demanding oil and gas isolation applications where bubble tight shut-off and reliable operation are critically ...
DN: 25 mm - 300 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 220 °C
The ball sector valve type 4040 with pneumatic actuator can be used for almost all on/off and control applications, especially with abrasive, pasty and fibrous fluids. This series is ...
DN: 25 mm - 300 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 220 °C
The ball sector motor valve type 4030 is used in a number of process applications for shut-off and control tasks, especially with abrasive, pasty and fibrous fluids. This series is characterised ...
DN: 25 mm - 100 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 220 °C
... motor valve type 4037 is suitable for use in potentially explosive atmospheres in accordance with Directive 94/9 EC. This motorized control valve is used in a number of process applications for shut-off ...
DN: 8 mm - 100 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 143 °C
The externally controlled diaphragm valve Type 2033 consists of a pneumatically operated piston actuator, a diaphragm and a tank bottom valve body. The proven and robust actuator with a plastic housing ...
DN: 10 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 100 °C
The GEMÜ 687 2/2-way diaphragm valve has a low maintenance plastic membrane actuator and is pneumatically operated. The valve has a metal distance piece. Normally Closed (NC), Normally Open (NO) and Double ...
DN: 15 mm - 125 mm
Pressure: 10 bar
Temperature: 10 °C - 60 °C
Safety hand wheel with locking positions Visual position indication Zero dead leg valve Suitable for slurries and abrasive media High viscosity or solid content applications Available with DIN backing ...
DN: 15 mm - 125 mm
Pressure: 10 bar
Temperature: 5 °C - 80 °C
Safety hand wheel with locking positions Visual position indication Zero dead leg valve Suitable for slurries and abrasive media High viscosity or solid content applications Available ...
DN: 15 mm - 125 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
Safety hand wheel with locking positions Visual position indication Zero dead leg valve Suitable for slurries and abrasive media High viscosity or solid content applications Available ...
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... prevent any risk of corrosion. - New valve body internal design. Substantially higher flow coefficient and lower pressure drops. The degree of efficiency reached has also enabled the size and weight of the valve ...
FIP - Formatura Iniezione Polimeri
DN: 80 mm - 100 mm
Pressure: 6, 10 bar
Temperature: -20 °C - 120 °C
... regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. • Connection system for ...
FIP - Formatura Iniezione Polimeri
DN: 25 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 450 °C
... Neles® series E ball control valves are designed to meet the most severe erosive service requirements of wide range of industrial applications in pulp & paper, petro-chemical, refining and related industries. E series ...
Metso Automation
DN: 15 mm - 200 mm
Pressure: 16 bar - 420 bar
Metal-sealed Floating Ball Valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW/SW/Thread operation: product overview:Athena metal-seated ...
DN: 50 mm - 800 mm
Pressure: 10 bar - 50 bar
Temperature: -40 °C - 400 °C
... eccentric butterfly valve Elara is available in forged or cast executions and different body, disc and seat materials. Application fields cover power generation, district cooling and heating as well as chemical processes ...
DN: 1.5 in - 6 in
GAS VALVES Floating ball valves Ball valves are cut off devices suitable for use both on natural gas distribution network and for liquid service when high performance on thightness ...
DN: 10 mm - 600 mm
... CERAMIC INDUSTRY, as a shut-off valve for solids, sludge, etc. ENVIRONMENTAL TECHNOLOGY, for sealing waste water, dust, sludge, etc. WATER TREATMENT/SEWAGE TREATMENT PLANTS, as a shut-off valve ...
DN: 40 mm - 300 mm
Pressure: 4, 3, 6 bar
... air operated pinch valves have a very wide and practically unrestricted field of application. Furthermore, a selection of four different flange types supports the diverse range of application of the VF series air operated ...
DN: 32 mm - 203 mm
Pressure: 50 bar
Temperature: -60 °C - 400 °C
Habonim`s metal seated ball valves series is tough – designed to stand up to the most difficult process conditions including a combination of extreme temperatures, high pressure, and abrasive media. Its ...
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 90 °C
This valve has a stem extension measuring 75 mm in length, and a square lever that measures 30x30 mm for a special key. It is a wafer type valve characterized by its long neck for isolation. The DN 40-300 ...
DN: 0.5 in - 6 in
Pressure: 10 bar - 250 bar
Temperature: -50 °C - 400 °C
... clean ball surface during valve operation, protect the seats from abrasion by fluid solid content and avoid the wedging in of solids between seat and ball surface cause of valve blocking. ...
DN: 3 mm - 1,400 mm
Pressure: 10 bar - 800 bar
Temperature: 180 °C - 650 °C
Split body ball valves up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valves of this design are well suited for extremely abrasive ...
DN: 1.813 in - 7.063 in
Pressure: 10,000, 15,000 psi
Cameron frac valves have earned a reputation for quality and reliability. Gate valves in frac trees and manifolds frequently flow and control high-pressure, high-volume, abrasive fracturing ...
DN: 25 mm - 500 mm
Pressure: 10 bar
Temperature: -40 °C - 150 °C
A resilient seated butterfly valve for general purpose applications The ideal valve for dry bulk conveying, food and beverage processing, corrosive slurries and paperstock.
Pentair Valves & Controls
Pressure: 100 psi
... better results. The unique design allows the switch to be located in any position and tolerant of very fine non-abrasive or coarse abrasive materials. Different styles available The Dynamic Air 15 Degree ...
DN: 50 mm - 900 mm
Pressure: 100, 75 psi
Temperature: 0 °C - 110 °C
KG43 Series knife gate valves are produced according to different fluids such as rock particles, mud etc. in liquid transport lines of the mining industry ; It is generally used for abrasive ...
DN: 65 mm - 200 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C
... performance butterfly valve for closing or flow regulating applications. Greater flow rates and reduced pressure drop across the valve, along with fine control, integral seal and ease of actuation means ...
Effast
DN: 15 mm - 150 mm
Pressure: 10, 16, 25, 40 bar
Temperature: -46 °C - 400 °C
... The KTN AP10NB is our version of the lug ball valve for extreme services, offering absolute tightness while allowing sudden changes in temperature (-46ºC – + 400ºC), high pressures and media with abrasive ...
KTN
DN: 50 mm - 1,200 mm
Knife gate valve with bonnet for hopper discharge. Its inside body conical shape and big face to face makes it the right solution for solid discharge in hoppers or silos. USE Toxic, Gases, Solids and granulate products ...
DN: 15 mm - 200 mm
Pressure: 100 bar
Temperature: -40 °C - 170 °C
Engelsberg ball valve KUL 4501 Flanged – Full Bore Reliable and durable ball valves for tight shut off in liquid and gas applications. Special design avoiding hidden cavities between ...
Ramén Valves AB
DN: 6 in - 24 in
... corrosion, DeZURIK Coal Burner Isolation Valves feature valve bodies and gates of carbon steel or 304 stainless steel. Other options include a stainless steel rising or non-rising stem. Handwheel and ...
DeZURIK
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining