ECOFIT plastic fans
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Air flow: 14 m³/h - 700 m³/h
Noise level: 27 dB - 75 dB
The 7F Series of fans and filter fans for cabinets and electrical panel are products to ventilate and safeguard against high temperatures. The range includes the following features ...
Air flow: 4.6 m³/h
Rotational speed: 12,000 rpm
Noise level: 23 dB
Axial compact fans are suitable for high air performance with moderate pressure build-up. The flow of air through the fan blades is parallel to the rotation axis. ebm-papst offers a wide selection of ...
ebm-papst
Air flow: 186.9 m³/h
Diameter: 38 mm
Noise level: 44 dB
... dual ball bearing axial fans offering a cost effective cooling solution without sacrificing on quality or reliability. Provided are a robust die-cast aluminium frame and an AC shaded pole impedance protected motor, these ...
Air flow: 35 m³/h - 870 m³/h
häwa filter fans ensure maximum air flow and at the same time reliably filter almost all types of dust particles. The perfect aerodynamics, ease of installation and attractive design – all of this makes our häwa filter ...
Air flow: 35 m³/h - 870 m³/h
The haewa FixCool filter fan revolutionizes the cabinet climate control. The innovative air flow system, avoiding so-called hot pockets, ensures maximum protection of sensitive components. haewa FixCool filter fans ...
Air flow: 1,000 m³/h - 35,000 m³/h
... of hot environments, - acceleration of drying and evaporation, - extraction of vapours and steams. The Nylair® fans are axial fans covering a wide flow range (1000 to 35000 m3/h). They of course, ...
Air flow: 200 m³/h - 10,000 m³/h
Centriplast® is a thermoplastic centrifugal fan designed for general ventilation, dust extraction, polluted air evacuation or smoke extraction. Treated air: corrosive gases, humid or polluted air Configuration: direct ...
Air flow: 0 m³/h - 550 m³/h
... protects the electronic components from overheating. The high-performance axial fan provides high air circulation. These filter fans are intended for indoor use. The plastic used for ...
STEGO
Air flow: 0 m³/h - 300 m³/h
... components from overheating. Four integrated axial fans provide a particularly high and uniform air circulation thus contributing to higher reliability. These filter fans are intended for indoor use. ...
STEGO
Air flow: 0 m³/h - 200 m³/h
... formation of localised hot pockets and protects the electronic components from overheating. These filter fans are intended for indoor use. The plastic used for the hood is highly UV light resistant. ...
STEGO
Air flow: 1,200 m³/h
Diameter: 100 mm - 315 mm
... elegant, high-impact, flame-retardant plastic housing with an integrated terminal box IP44 and guide vanes. Impellers The impellers up to size 250 are made of plastic and from size 315 are made of ...
Rosenberg Ventilatoren GmbH
Air flow: 15,000 m³/h
Diameter: 250 mm - 630 mm
... level as possible. The fans are designed to convey air and other non-aggressive gases or vapours. As drive motors, asynchronous external rotor motors from our own production are used. In addition to the modular design ...
Rosenberg Ventilatoren GmbH
Air flow: 33,000 m³/h
Diameter: 200 mm - 1,000 mm
... EC axial fans are manufactured from galvanised sheet steel with white powder plastic coating and protection guard with black powder plastic coating. Impellers The EC axial fans ...
Rosenberg Ventilatoren GmbH
Air flow: 19,000 m³/h
... Product specification: 7 backward-curved, aerofoil section blades in frame sizes 175 to 630 mm. Impeller made of high-performance composite material. Version with inlet nozzle made of plastic. Volume ...
ZIEHL-ABEGG
Air flow: 200 m³/h - 750 m³/h
Diameter: 108 mm - 200 mm
... Single inlet centrifugal fans AC single phase motor Forward impeller galvanized steel or plastic, Impeller diameter of 108 up to 200mm, AC single phase capacitor external rotor motor 230V50/60Hz ...
ROSENBERG VENDÔME
Air flow: 310 m³/h - 2,700 m³/h
Diameter: 170 mm - 400 mm
ECOFIT axial fans AC single phase and three phase motor Plastic and black painted steel propeller, air direction “A” or “V”, Propeller diameter of 170 up to 400mm, AC single phase capacitor ...
ROSENBERG VENDÔME
Air flow: 315 m³/h - 1,900 m³/h
Diameter: 133 mm - 315 mm
Backward ECOFIT centrifugal fans AC single phase motor Backward impeller plastic or galvanized steel, Impeller diameter of 133 up to 315mm, AC single phase capacitor external rotor motor 230V50/60Hz ...
ROSENBERG VENDÔME
Air flow: 200,000 m³/h
... belt drives that enable frequency conversion. Material used for housing is steel or stainless steel. Plastic or aluminium is used for impellers. These fans are particularly designed based upon the project.
Air flow: 4,987 m³/h - 237,000 m³/h
Diameter: 280 mm - 2,000 mm
Rotational speed: 750, 500, 1,500, 1,000, 3,000 rpm
Axial duct fans. Standard low-pressure fans popular in most duct ventilation systems. Planetfan produces the largest range of duct fans manufactured in Poland in terms of available diameters. • ...
Air flow: 2,910 m³/h - 39,315 m³/h
Diameter: 315 mm - 1,000 mm
Rotational speed: 3,000, 1,000, 1,500 rpm
... grease nipples to relubricate bearings • Housing thermal insulation • Fan diameters up to a maximum of Ø2000mm • Housing: • Perfectly round, machined from structural sheet steel. Equipped on both ...
Air flow: 1,450 m³/h - 5,600 m³/h
Diameter: 280 mm - 1,250 mm
Roof ventilators – axial. Characterised by very high efficiencies in the low pressure range. Designed for industrial use. Resistant to atmospheric conditions. Optionally, they can be made in a supply version. • Operating temperatures: ...
Air flow: 5.43 m³/h - 6.45 m³/h
Professional fan MASTER DFX 20 Air flow: 5.430/6.450 m3/h Main features: - Robust, plastic rotomoulded casing - Easy to use and transport - High air flow - Axial fan - ...
Air flow: 0 m³/h - 19 m³/h
Diameter: 1.5 m
Rotational speed: 50 rpm - 120 rpm
Modern HVLS Fan Embrace the Slow-paced Life With the Earth's axis tilted at 23.5°, it created the beautiful sceneries of the 4 seasons. With the 31° curvilinear design of the SUNON Morden HVLS FAN blade, ...
Air flow: 3.77 m³/min - 2,030 m³/min
Rotational speed: 3,500, 5,000, 6,500, 8,000 rpm
Noise level: 43 dB - 59 dB
... Line Series is manufactured by Micronel AG. The frame is made of thermoplastic PBT or GF30% and it is also made of UL94-V0. The impeller is also made of thermoplastic PBT or GF15% and UL94-V0. IT has ...
Air flow: 100 m³/h - 450 m³/h
Rotational speed: 2,900, 1,450 rpm
Noise level: 45 dB - 67 dB
... completely by injection moulding.Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating ...
PLASTIFER
Air flow: 500 m³/h - 1,600 m³/h
Rotational speed: 1,450, 950, 2,900 rpm
Noise level: 57, 45, 70 dB
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and ...
PLASTIFER
Air flow: 720 m³/h - 2,000 m³/h
Extract Fan Low Pressure Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller ...
PLASTIFER
Air flow: 25 m³/h - 6,720 m³/h
Rotational speed: 920 rpm - 2,800 rpm
GEOVENT Plastic Fans type RPV, LPV and MPV is a serie of acid proof plastic, designed for for extraction of gases and fumes from highly corrosive processes. For instance lab fume hoods, ...
Diameter: 1,530 mm
The NEW A fans are manufactures assembling variable pitch, wide-chord airfoil profile blades with a light aluminum alloy hub. The fans are the best choice for applications which demand ...
HW Ventilation
Diameter: 300 mm - 1,250 mm
... ethylene, or gases and vapors of equivalent hazard Dust group IIIC - Atmospheres containing conductive dust Construction Fan Highly-efficient axial impeller, tested in HW Ventilation AMCA 210-designed wind tunnel Blades: ...
HW Ventilation
Diameter: 300 mm - 1,102 mm
F plastic fans are manufactured assembling variable pitch, slightly sickle profile blades with a light aluminum alloy hub. The fans are the best choice to suit a variety ...
HW Ventilation
Air flow: 11.32 l/min - 122,742.65 l/min
Diameter: 30 mm - 220 mm
These powerful, low-noise fans come with excellent energy efficient ratings and are particularly suitable for industrial applications and electronic components where high volumetric air flows are required. CTX offers ...
Air flow: 8.5 m³/h - 1,000 m³/h
Noise level: 33 dB - 75 dB
... mounting system, for plates from 1 mm to 3.7 mm thick. The installation of FF Series filter fans does not require the use of tools. • The FF Series filter fans connect very quickly using a cage clamp ...
Fandis
Axial Flow Fan for Wind Turbine Generator Product Overview It is mainly composed of the impeller, motor, air duct and mesh cover. The air duct is made of Q235 series steel plate, the surface can be painted according ...
ERG Technology
Air flow: 38 ft³/min - 560 ft³/min
... need of a rainhood. Patented “Click & Fit” design provides a hardware-free installation. Plastic made from strong, heat resistant UL 94 V0 fire approved ABS material. Fluted filter-mat provides longer ...
• Centrifugal fans made of anti-acidic material • Case made of: PP – PVC • Impeller made of: PP – PVC – FE – AISI316 • Flow rates and prevalence: on ...
Air flow: 6,000 m³/h - 40,000 m³/h
Industrial polypropylene vacuum serve as link to galvanic plants and the scrubber.
Rotational speed: 1,680 rpm - 2,460 rpm
Noise level: 26 dB - 58 dB
In-line fans for small ducts with removable covers and small size with long life ball bearings Fan: • Casing made of self-extinguishing V0 plastic material. • External terminal box ...
SODECA
Air flow: 90 m³/h - 1,900 m³/h
Rotational speed: 1,285 rpm - 3,300 rpm
Noise level: 21 dB - 61 dB
In-line duct extractor fans with a detachable body and small size, fitted with an EC Technology motor Fan: • Plastic casing with double insulation. • External terminal box with variable ...
SODECA
Air flow: 1,250 m³/h - 12,800 m³/h
Rotational speed: 905 rpm - 2,790 rpm
Noise level: 52 dB - 82 dB
Wall mounted axial fans with fiberglass reinforced plastic propeller. Fan: • Airflow direction from motor to impeller. • Fibreglass reinforced polyamide-6 impeller. • Steel sheet ...
SODECA
Air flow: 330, 60, 88, 175 m³/h
Diameter: 100, 120, 150 mm
Noise level: 26, 33, 42 dB
... when the fan is off • Unique BLADELET impeller design for optimised performance and acoustics • Suitable for wall, ceiling or window mounting • Complies with all UK building regulation requirements • Available in ...
ELTA FANS
Air flow: 0.23 m³/s
Diameter: 230 mm
Rotational speed: 1,350 rpm
... easy fix mounting by one installer alone for the complete installation of the fan. Corrosion Resistance Units are manufactured from shock proof, heat resistant white plastic with a temperature stability ...
ELTA FANS
Air flow: 0.53 m³/h
Diameter: 305 mm
Rotational speed: 1,200 rpm
... easy fix mounting by one installer alone for the complete installation of the fan. Corrosion Resistance Units are manufactured from shock proof, heat resistant white plastic with a temperature stability ...
ELTA FANS
Air flow: 2,470 m³/h - 3,740 m³/h
Noise level: 74 dB
... screens per OSHA; powder coated • Fixed guide vanes for optimal performance • Glass-reinforced, polypropylene, non-sparking fan blade • Motor – Single speed, Totally Enclosed ¾ HP • 115V (60 Hz), 230V (60 Hz), or ...
COPPUS
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining