EMG - LONG forming presses

Force: 800 kN
Opening: 1,200 mm
Rate (strokes/min): 150 p/min

... preconditions for tooling technologies in parallel operations in the fields of blanking, drawing or trimming. The modular press design makes it possible to easily implement the technical parameters as required in the ...

Force: 1,250 kN
Rate (strokes/min): 120 p/min
Stroke: 250 mm

... and idle times can be reduced as well. Advantage in technology: Maximal tonnage available along the entire stroke range Press forces can be distributed within the die Arbitrary stroke locations and stroke heights, ...

this transfer press with strip feeder and cupping stage is built for blanking from strip, creating a cup for easier product transfer, up to 14 deep drawing stages. can be used for packaging industry, defense, general ...

Force: 14 kN - 420 kN
Stroke: 115 mm
Max. pressure: 6 bar

... units always in operation, for maximum comfort of use for the operator. VERSATILITY OF USE Many sizes and versions for a press cut to size of application. MAXIMUM SECURITY All the presses comply with the current ...

Force: 15, 30, 80, 7, 50 kN
Stroke: 100, 60 mm
Max. pressure: 6 bar

... for the operator. They combine the practicality of use of a rack press with the thrust force of a hydraulic press. How it Works 1 - press at rest 2 - approach stroke The lever ...

Force: 1 kN - 300 kN
Stroke: 280 mm
Working speed: 250 mm/s

... For the management of the movement and the containment of waste, they are controlled by a dedicated electronic instrument (Press-Right). A ready-to-use, safe and certified solution. The Advantages of the Electromechanical ...

Force: 490 N
Opening: 155 mm
Stroke: 90, 28 mm

Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control ...

Force: 1,470.9 N
Opening: 450 mm
Stroke: 63, 100, 160 mm

Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control ...

Force: 3.9 kN
Opening: 580 mm
Stroke: 70 mm

Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control ...

Force: 880 kN
Opening: 196 mm
Max. pressure: 250 bar

The V1.32, also known as R32, it’s the first model produced by Neotecman. The innovative design and forging system creates a new tendency in the forging industry. Today, this model still offers a very especial and innovative solutions ...

Force: 980 kN
Opening: 200 mm
Max. pressure: 250 bar

PRESS PUNCHES - 3 horizontal PRODUCTION (empty) - From 500 to 3.600 parts/hour BAR DIAMETER - From 12 to 32 mm (From 0.47 to 1,26 in) BAR LENGTH - To 4.000 mm (To 2.65 lb) DIE DIMENSONS 205 x 205 mm This system ...

Force: 980 kN
Opening: 500 mm
Max. pressure: 250 bar

... weight. Moreover, Neotecman’s design is based in a double structure for press and furnace, that includes the assembly of a robot to offer a multiple billet positioning in the press, simetric billets, ...

... The equipment supplied includes: Blanks loading area. Heating furnace. Robot for loading of the press. Hydraulic press. Robot for unloading of the press.

Force: 400 kN - 4,000 kN
Opening: 700 mm - 1,300 mm

The structure is made in thick steel plate, welded, stress relieved and shot-blasted. The cylinders, made out of special steel, have guides of bronze and the pistons rods are case-hardened and chromium-plated. The slides are guided ...

The structure is made in thick steel plate, welded, stress relieved and shot-blasted. Transversal movement of the cylinder. System with hydraulic cylinder for lifting the steel plate from the table of the machine. Longitudinal ...

STRAIGHTENING AND FORMING PRESS C-FRAME OR ARCH PRESSES Are adapted for custom work or mass production to use in aircraft, energy, agribusiness, automotive, heavy industry … Designed for a large ...

Force: 50 tf
Stroke: 500 mm
Table width: 800 mm

Press technologies: electrical axis with high efficiency, speed, accuracy and dynamic movement Compact and easy integration into automatic cell Multilingual dialog and programming interface on a 12’’ touch screen ...

Force: 20,000 kN
Stroke: 1,000 mm
Working speed: 10 mm/s

Maxi forming press SHELL PLATE USED ON LIQUIFIED PETROLEUMGAS TANK Operations: Thick steel plate forming needs high force presses with a wide accesible space between feet and ...

Force: 15 tf
Opening: 168 mm - 980 mm
Stroke: 160 mm

Manuel hand and foot operated workshop press Standard features: • 15 ton. • Movable cylinder. • Press block is standard. • Easy to read pressure gauge. • Handle for adjusting the piston ...

Force: 20 tf
Opening: 54 mm - 1,044 mm
Stroke: 190 mm

Pneumatic/hydraulic operated workshop presses Model WSP 20P. Can be operated both pneumatically with foot pedal and manually with handle. Standard Equipment • Moveable cylinder • Easy to read pressure gauge • Long stroke • ...

Force: 30 tf
Opening: 51 mm - 1,131 mm
Stroke: 150 mm

Pneumatic operated workshop presses Model WSP 30P. Standard Equipment • Can be operated both pneumatically with foot pedal and manually with handle • Moveablecylinder • Easy to read pressure gauge • Long stroke • 2 pcs ...

Force: 12 tf

Pressfitting. Muffler pressfitting one or two stations. Description and Technical data Models: DP 800, DP 1200 • One station unit • Work power 12 Ton • Distance range table/mace from 700 mm min. to 2000 mm max. • Working stroke ...

Ridge-Locking (mechanical blocking). Simultaneous ridge-locking horizontal mode one station or two stations. Description and Technical data Models: DCR 70, DCR 70/2 • Simultaneous ridge-locking horizontal mode one station or two ...

Ridge-Locking (mechanical blocking). Machine with simultaneous ridge-locking vertical mode two stations. Description and Technical data Model: DCRV 70/2 • Tube range from ø16 mm to ø70 mm • Stainless tube thickness 2 mm

Weight: 3 kg
Overall length: 402 mm

Battery powered bender for aluminium and cooper rectangular wires. • (Thickness) x (width) in the range (2 ÷ 5.5 mm) x (3 ÷ 12 mm) • max. cross section 63 mm2 Special features: • efficient Li-Ion battery • automatic retraction when ...

Force: 5 tf - 35 tf
Opening: 520 mm
Stroke: 520 mm

E-FORM X2 is the most flexible of the range. As compact as a single automation allows you to deal with large and small production series. Each working station is independent, but supervised by a single controller. The use of electric ...

Force: 5 tf - 35 tf
Opening: 0 mm - 520 mm
Table width: 500 mm - 500 mm

E-FORM X1 is an agile solution with a compact design for forming small series, excellent for prototyping. Its dimensions allow for easy placement within the production area. The silence, derived from the exclusive use ...

Force: 196.1, 20, 40, 50, 80 kN
Opening: 0 mm - 550 mm
Stroke: 0 mm - 500 mm

E-FORM XL1, with a solid design and a large working area, allows for better ergonomics thanks to the generous dimensions of the plates that facilitate loading/unloading and cleaning of the moulds. Each plate houses n. 5 resistances for ...

Force: 300, 600, 1,000 kN
Opening: 200, 300, 400 mm
Stroke: 200 mm - 400 mm

... /600/1000 are especially designed for demanding applications and automated use. •2 column press frame: extraordinarily high parallelism and easy access to press area •extremely accurate temperature ...

Force: 300 kN
Opening: 0 mm - 150 mm

•The LabManual 300 is a manually operated press especially designed for basic pressing operations and moderate use. •2 column press frame: extraordinarily high parallelism and easy access to press ...

Force: 50 kN - 5,000 kN
Opening: 100 mm - 1,000 mm
Stroke: 100 mm - 1,000 mm

... 30-40 mbar), floating upper platen for lower press range (1-10 kN), higher temperatures up to 700°C, cassette cooling system,… •2 column press frame: extraordinarily high parallelism and easy access ...

Force: 1,000, 1,500 kN
Stroke: 300 mm
Table width: 1,020, 1,520 mm

UP Line - Universal Hydraulic Pressbrakes Standard Accessories: "• Top gooseneck pressbrake die and holders • Bottom die with 5 V-Channels • Adjustment system for taking down or up the table • Pressure gradeless adjustment • ...

Force: 1,000, 1,500 kN
Stroke: 300 mm
Table width: 1,020, 1,520 mm

UT Line - Universal Hydraulic Forming Presses Standard Accessories: "• Adjustable table height • Top and bottom table with T-Chanels to replace a mould • High capacity workshop forming press ...

Force: 600 kN - 2,000 kN
Stroke: 250, 300 mm
Weight: 835 kg - 4,800 kg

UK & UPM Line - Hydraulic Workshop Straightening Presses Standard Accessories: "• Steel welded frame • Easy to operate • Stop at any position • Pressure monometer • Safety valve against overloading • V-Blocks standard ( 2 pcs. ...

Force: 490.3 kN

... atmosphère controlled automatic hot press according to customers requirements with different force capacity, measure and température. PRODUCT INFORMATION MSE Furnace is produced atmosphère controlled automatic hot ...

Cold isostatic pressing applies pressure in a liquid from every direction to achieve greater uniformity of compaction (high-quality parts) for intricate shapes as compared to uniaxial pressing. MSE Technology’s Cold Isostatic Presses ...

Force: 294.2 kN
Opening: 150 mm

... ° C •*** Maximum press area diameter: 250 mm •*** Stroke distance: 150 mm •*** Adjustable pressing force of 0-30 tons, •± 30 kg force accuracy, •Temperature accuracy ± 2 ° C, •Ability to read continuously applied ...

Force: 30, 20 tf
Stroke: 150 mm
Hydraulic pump power: 3 kW

Chrome Plated Cylinder Steel Welded Frame Oil Pressure Gauge Pressure Adjustable

Force: 30, 20 tf
Stroke: 150 mm
Hydraulic pump power: 3 kW

Chrome Plated Cylinder Steel Welded Frame Oil Pressure Gauge Pressure Adjustable

Force: 80, 100, 60 tf
Stroke: 400 mm
Hydraulic pump power: 4, 3 kW

100 Ton Workshop Type Motorized, Arm and Wheel Press

Force: 320, 600, 800, 1,000 kN
Opening: 450, 500, 550 mm

Reducton of Mold Wear All movements can be controlled. In this way, the stroke is completed as soon as possible and without permitting the deformaton of the mold. Integrated software that combines hydraulic and mechanical servopress ...

Force: 200, 100, 150 kN

... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...

Force: 100, 30, 60 kN

... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...

Force: 3,150 kN

... multi-purpose press for drawing, punching and embossing. The frame is made of steel and is welded into one piece (WP = Welded Plate). This model offers many options such as cushion, third cylinder, light curtain and/or ...

Force: 10,000 kN

ODEN-Flexible, a hydraulic press available in many different configurations allowing for a wide ODEN-F is a flexible hydraulic four-column press that is available in many different configurations. This ...

Force: 50,000 kN

The ODEN-FT hydraulic press is for press operations with higher tonnage and larger press beds. It is excellently suited to press hardening, drawing, embossing, punching, ...

Force: 150, 200 tf
Opening: 13, 10 in
Stroke: 13 in

... jobs. Other features of the 150-200T H-Frame Press include: • May be used horizontally for special pressing applications with user-supplied supports. • Work head has wide horizontal travel; rugged press ...

Force: 80, 100, 150, 200 tf
Stroke: 13 in

The original, patented Roll-Bed® design where the bed rolls out for easy loading and unloading with a crane or other lifting device, supporting loads up to 3,000 lbs (1361 kg). The Roll-Bed Presses are available in 4 different capacities. ...

Force: 100 tf
Stroke: 10, 13 in
Weight: 1,698, 1,795, 1,690, 1,886 lb

... place for off-center pressing jobs. Other features of the 100T H-Frame Press include: • May be used horizontally for special pressing applications with user-supplied supports. • Press bed is raised ...

Force: 50 tf
Opening: 136 mm - 1,000 mm
Stroke: 250 mm

Pressure regulator - • Two-speed hydraulic unit - - Maneuver by means of electric pedals - • Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate - - Special front opening 1500mm. ...

Force: 80 tf
Opening: 860, 1,000, 260, 220 mm
Stroke: 250 mm

Pressure regulator - • Two-speed hydraulic unit - • Maneuver by means of electric pedals - • Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate - - Special front opening 1500mm. ...

Force: 100 tf
Opening: 850, 280, 240, 250, 1,000 mm
Stroke: 250 mm

Pressure regulator - • Two-speed hydraulic unit - • Maneuver by means of electric pedals - • Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate - - Special front opening 1500mm. ...

Force: 17 tf
Max. pressure: 250 bar
Weight: 240 kg

High-precision laboratory press for the preparation of elastomeric and thermoplastic materials specimens. They can also be used for the manufacturing of industrial gaskets and stamps. PLATE DIMENSIONS 350 x 350 ...

Rate (strokes/min): 220 p/min
Stroke: 50 mm - 90 mm

Additional to our main stamping press products, Bibra also has other stamping press types: coil feed presses, disc feed presses and our lidmaker UST (underdrive press). Our lidmaker ...

Rate (strokes/min): 140 p/min - 220 p/min
Stroke: 8 mm - 100 mm
Table width: 425 mm - 560 mm

... main and auxiliary feeding bars guides the strips into the press, without causing idle strokes. A roller ejector transports the skeleton-strip out of the press. A sensor automatically stops the press ...

Rate (strokes/min): 210 p/min

... you to change the toolings sideways or from the back, we are responding to market needs. Our fully automatic sheet feed press includes sheet de-stacking, alignment table with safer and more accurate sheet feeding, ...

Force: 797.1, 2,192.1, 2,989.2, 996.4, 1,494.6 kN
Opening: 250, 300 mm

Specifically designed to perform work involving fretwork, deep-drawing, punching, bending, straightening, etc. Consist of an electro welded structure made solely of SR355JR steel. They are mechanized at the end of the structural welding ...

Force: 996.4, 1,494.6, 498.2, 797.1 kN
Opening: 250 mm

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the end of the ...

Force: 498.2, 797.1, 996.4, 1,494.6 kN
Opening: 250 mm

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the end of the ...

Force: 80 tf - 800 tf

... /part ejector featuring dynamic control through four travel zones Light curtains guard the front and rear openings of the press; bolt-on expanded metal guarding cover side openings Kidney loop filter/cooler circuit ...

Force: 280 tf - 280 tf

The Triform 16-10-7DD deep draw sheet hydroforming press offers a 16 inch forming space and an incredibly capable 10,000 PSI of pressure. This machine includes a 7 inch punch stroke and 12″ punch tool ...

Force: 2.5 tf - 2.5 tf

... a 24”-diameter forming area and 5,000 PSI of pressure, the Triform model 24-5FC fluid cell sheet hydroforming press is one of the most versatile models available on the market today. Ideal for low-volume, ...