Force: 490 N
Opening: 155 mm
Stroke: 90, 28 mm
... Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control are needed ...
SOMAUT S.r.l.
Force: 1,470.9 N
Opening: 450 mm
Stroke: 100, 160, 63 mm
... Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control are needed ...
SOMAUT S.r.l.
Force: 3.9 kN
Opening: 580 mm
Stroke: 70 mm
... Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control are needed ...
SOMAUT S.r.l.
Force: 0 kN - 300 kN
Opening: 250 mm - 800 mm
Table width: 600 mm
... -time display and adjust machine parallelism Why SXKH XS Die Spotting Press Ultra-low machine height, solve the height restriction problem of traditional die spotting press. Small worktable size, suitable for small ...
Force: 5 kN - 15 kN
Stroke: 20 mm - 60 mm
Table width: 80, 160, 110 mm
... goals, we have continuously developed the hand lever presses. Do you need a high force at the stroke end for material forming processes? Then SCHMIDT® Toggle Presses are just the right choice. Features * High force at the end ...
SCHMIDT Technology
Force: 2.5 kN
Opening: 40 mm - 180 mm
Stroke: 28 mm
... goals, we have continuously developed the hand lever presses. Do you need a high force at the stroke end for material forming processes? Then SCHMIDT® Toggle Presses are just the right choice. Features * High force at the end ...
SCHMIDT Technology
Force: 12 kN
Opening: 105 mm - 205 mm
Stroke: 45, 50 mm
... goals, we have continuously developed the hand lever presses. Do you need a high force at the stroke end for material forming processes? Then SCHMIDT® Toggle Presses are just the right choice. Features * High force at the end ...
SCHMIDT Technology
... The equipment supplied includes: Blanks loading area. Heating furnace. Robot for loading of the press. Hydraulic press. Robot for unloading of the press. ...
Force: 400 kN - 4,000 kN
Opening: 700 mm - 1,300 mm
Stroke: 400 mm - 800 mm
... The structure is made in thick steel plate, welded, stress relieved and shot-blasted. The cylinders, made out of special steel, have guides of bronze and the pistons rods are case-hardened and chromium-plated. The slides are guided by self lubricating ...
Force: 350 tf
Stroke: 350 mm
Table width: 1,500 mm
... The structure is made in thick steel plate, welded, stress relieved and shot-blasted. Transversal movement of the cylinder. System with hydraulic cylinder for lifting the steel plate from the table of the machine. Longitudinal movement ...
Force: 5 kN
Stroke: 40 mm
Table width: 60 mm
... white, red Advantages: - Height adjustment of press head by threaded spindle - High output power with moderate input force - Accuracy thanks to precise ram guidance - Accurately machined press table with 2 tool-fixing ...
mäder Pressen
Force: 5 kN
Stroke: 40 mm
Table width: 60 mm
... white, red Advantages: - - Height adjustment of press head by threaded spindle - - High output power with moderate input force - - Accuracy thanks to precise ram guidance - - Accurately machined press table with ...
mäder Pressen
Force: 5 kN
Stroke: 40 mm
Table width: 60 mm
... white, red Advantages: - - Height adjustment of press head by threaded spindle - - High output power with moderate input force - - Accuracy thanks to precise ram guidance - - Accurately machined press table with ...
mäder Pressen
Force: 60 tf
... EP65 HORIZONTAL HYDRAULIC PRESS OF CAPCITY 60 TONS FORCE Powerful, versatile machine for easy drawing, tapering, flanging and bending FEATURES • - Drawing, tapering, flanging, bending press • - Electronic control ...
Force: 45, 245.2 tf
... EP45 HORIZONTAL HYDRAULIC PRESS OF CAPCITY 45 TONS FORCE Powerful, versatile machine for easy drawing, tapering, flanging and bending FEATURES • - Drawing, tapering, flanging, bending press • - Electronic control ...
Force: 150 tf - 3,000 tf
The Faccin PPM+MA series is a remarkable range of hydraulic dishing presses with automatic manipulators, providing unmatched durability, reliability, and efficiency at a cost-effective price. It’s designed to meet the exact requirements of pressure vessel ...
Force: 2,500 tf
... The Faccin PPH hydroforming press is a crucial machine for manufacturing steel, stainless steel, and aluminium dished heads for tanker trucks. These hydroforming presses are in high demand for truck tank production due to their ability ...
Force: 100 tf - 1,200 tf
Stroke: 200 mm - 350 mm
Max. pressure: 0 MPa - 20 MPa
... Hydraulic Hot Press Machine featuring 2RT/3RT/4RT demolding methods, precise mold positioning, and dual motor design for safe, independent operation of twin stations. Ideal for high-quality, damage-free molding processes. The hydraulic ...
Force: 15, 30 kN
Stroke: 0 mm - 40 mm
To meet with more particular production processes, a range of pneumatic presses are specially suitable for crimping, riveting, bending, marking, blanking, punching and raising, with maximum precision and safety. Several types of controls are available ...
... springs by compressing them during the repressing of the molds, which is normally carried out while hot. PSA automatic mold press performs fast and accurate pressing of lids onto molds for cooked products, regardless of type and size. The ...
Force: 1,000, 1,500 kN
Stroke: 300 mm
Table width: 1,020, 1,520 mm
... UP Line - Universal Hydraulic Pressbrakes Standard Accessories: • Top gooseneck pressbrake die and holders • Bottom die with 5 V-Channels • Adjustment system for taking down or up the table • Pressure gradeless adjustment • Stroke stepless adjustable ...
Force: 1,000, 1,500 kN
Stroke: 300 mm
Table width: 1,020, 1,520 mm
... UT Line - Universal Hydraulic Forming Presses Standard Accessories: "• Adjustable table height • Top and bottom table with T-Chanels to replace a mould • High capacity workshop forming press with ...
Force: 600 kN - 2,000 kN
Stroke: 250, 300 mm
Weight: 835 kg - 4,800 kg
... UK & UPM Line - Hydraulic Workshop Straightening Presses Standard Accessories: • Steel welded frame • Easy to operate • Stop at any position • Pressure monometer • Safety valve against overloading • V-Blocks standard ( 2 pcs. ) • Adjustable ...
Force: 10 tf
Hydraulic pump power: 1.5 kW
Weight: 170 kg
... Horizontal hydraulic press, strong and compact, with through-rod piston for adjusting the mechanical stop, no micro limit switch. Machines with manual lever control and spring return. User-friendly and intuitive. Working height - 100 ...
Force: 20 tf
Stroke: 100 mm
Hydraulic pump power: 2.5 kW
... Horizontal hydraulic press, strong and compact, with through-rod piston for adjusting the mechanical stop, no micro limit switch. Machines with manual lever control and spring return. User-friendly and intuitive. Working height - 100 ...
Force: 30 tf
Stroke: 180 mm
Weight: 400 kg
... Horizontal hydraulic press, strong and compact, with through-rod piston for adjusting the mechanical stop, no micro limit switch. Machines with manual lever control and spring return. User-friendly and intuitive. Working height - 180 ...
Weight: 1,900, 1,700 kg
... Used for the layer board shaping of chemical pharmacy ect powder type particles. Automation Adopting an automatic weighing system User-Friendly Design The loading port is set at a distance of 70CM above the ground, achieving easy loading and user-friendly ...
Force: 5 tf - 35 tf
Opening: 520 mm
Stroke: 520 mm
E-FORM X2 is the most flexible of the range. As compact as a single automation allows you to deal with large and small production series. Each working station is independent, but supervised by a single controller. The use of electric motors allows to ...
MECCATRONICA AUTOMAZIONI
Force: 5 tf - 35 tf
Opening: 0 mm - 520 mm
Table width: 500 mm - 500 mm
... E-FORM X1 is an agile solution with a compact design for forming small series, excellent for prototyping. Its dimensions allow for easy placement within the production area. The silence, derived from the exclusive use of the electric ...
MECCATRONICA AUTOMAZIONI
Force: 196.12, 20, 40, 50, 80 kN
Opening: 0 mm - 550 mm
Stroke: 0 mm - 500 mm
E-FORM XL1, with a solid design and a large working area, allows for better ergonomics thanks to the generous dimensions of the plates that facilitate loading/unloading and cleaning of the moulds. Each plate houses n. 5 resistances for a heating power ...
MECCATRONICA AUTOMAZIONI
Force: 850, 630, 500, 400, 250 kN
Opening: 270 mm - 330 mm
Rate (strokes/min): 70 p/min - 600 p/min
... OMPSA four columns presses mod. 4CN, were developed since the half of the Sixties with specific experience on this field. They are particularly suggested for workings that use progressive dies, requiring middle and high speed production. The electric ...
OMPSA S.r.l.
Force: 400, 450, 750 kN
Opening: 265 mm - 315 mm
Rate (strokes/min): 50 p/min - 250 p/min
... Our four-column presses with double knuckle-joint mod. 2G, developed since the half of the Eighties with specific experience on this field, are specially designed for using dies for progressive pressing and coining at average production speed. The ...
OMPSA S.r.l.
Force: 250 kN
Weight: 1,600 kg
... The OMPSA four columns presses mod. 4CL, developed since the half of the Sixties with specific experience on this field, are particularly suggested for that kind of workings that use dies of progressive working kind requiring middle and high speed production. The ...
OMPSA S.r.l.
Force: 40 kN
Opening: 300 mm
Stroke: 310 mm
... >
Applications
- Assembly pressing and joining operations
- Forming and light forming tasks in production lines
- Integration with automated feeding and tool-change
GECHTER
Force: 2.5 kN - 22 kN
Opening: 60 mm - 600 mm
... goals, we have continuously developed the hand lever presses. Do you need a high force at the stroke end for material forming processes? Then SCHMIDT® Toggle Presses are just the right choice. High force at the end of stroke (see ...
SCHMIDT Technology
Table width: 125, 120 cm
Table length: 80, 85 cm
Hydraulic pump power: 12,000 W
... a range of substrates, including textiles, aluminium, MDF, wood, tiles, etc. Large format, air-operated, manual-drawer press. Suitable for: large-format textile prints, sublimation on large-format textiles and large-format rigid ...
SEFA
Force: 300, 600, 1,000 kN
Opening: 200, 300, 400 mm
Stroke: 200 mm - 400 mm
... /600/1000 are especially designed for demanding applications and automated use. •2 column press frame: extraordinarily high parallelism and easy access to press area •extremely accurate temperature distribution •fixed ...
Fontijne Presses
... Single Action And Deep Drawing Hydraul The serial hydraulic press structure are four columns and frame type, with low cushion pad, which can realize the sheet metal drawing, bending, forming, blanking, punching and flanging ...
Hefei Metalforming Intelligent Manufacturing Compa
Force: 1,000, 2,000, 3,150 kN
Opening: 800, 900, 1,200, 1,250 mm
... Four Columns Hydraulic Press Machine For Deep Drawing Four Columns Hydraulic Press Machine For Deep Drawing Product Description The four-column hydraulic press is a mechanical device that uses oil ...
TengZhou Zhongyou Heavy Industry Machinery Equipment Co.,Ltd
Force: 4,000 kN - 24,000 kN
Rate (strokes/min): 25, 30 p/min
Stroke: 600, 800 mm
... The best features for model SDE includes drawing, forming, blanking, punching and cutting of automotive parts, which comply and satisfy the trend and application of steel parts with light weight but high tensile strength in modern automotive ...
SEYI HQ
Force: 2,000, 1,500, 5,000, 3,500, 2,500 kN
Stroke: 250, 300, 350 mm
Table width: 750, 850, 900, 1,100, 1,400 mm
... metal shell, cover plate, lighting accessories, etc. 2, metal and non-metal parts of stamping, drawing, bending, flanging, forming and other stamping processing. 3. Powder pressing of metal or non-metal products, such as tea block, ...
Dongguan Jianlong hydraulic machinery Co., LTD
Force: 160 tf - 600 tf
Stroke: 200 mm - 350 mm
Hydraulic pump power: 15 kW - 55 kW
... variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing bending, flanging, and coining. This could be a single stage operation ...
Shenzhen Sunrui Machinery Co., Ltd.
Force: 300, 200, 500 tf
Opening: 400, 350, 450 mm
Stroke: 150 mm
... different type of pressing technology requirement; (Servo motor driving system as option) Application field Stamping, forming, shallow drawing, die spotting, molding and blanking of metallic and non-metallic material, such as ...
DEKUMA Rubber and Plastic Technology
the best suppliers